Distortion mechanism of patterning positions in the soft roller printing process for realizing large-area overlay printing

Soft roller printing techniques such as rolling mask soft lithography and offset printing are prominent as high-resolution, high-throughput patterning technologies. The overlay accuracy of soft roller printing becomes critical in large-area fabrications since many factors causing overlay errors tend to be proportional to the patterning area. In this study, the mechanism of overlay distortion was investigated in the soft roller printing process using both lab testing and finite element simulations. The overlay distortion is closely related to the deformation of PDMS in soft roller printing and it is key to investigate how PDMS is deformed under various disturbances from equipment and process. Two kinds of major disturbances, 'nip motion error' and 'roundness error', are defined and their effect on the overlay distortion is discussed. The methodology to improve overlay accuracy in the soft roller printing process is also presented and verified. For the nip motion error, the compensation method, in which the nip motion error is modeled based on the previous printed position errors and the modeled error is compensated by the alignment stage, are proposed. It is proven that high compressibility of cushioning can help to relieve the position errors caused by roundness errors by reducing the deformation of PDMS. Finally, printing position errors can be reduced to the level of a few micrometers when the overlay distortion mechanisms investigated in this study are well controlled.

[1]  Etienne Barthel,et al.  Adhesive elastic contacts: JKR and more , 2008 .

[2]  In‐Byeong Kang,et al.  43.4: Enhancement of Roll Printing Accuracy for TFT‐LCD , 2008 .

[3]  Adam Stagnaro.  Design and development of a roll-to-roll machine for continuous high-speed microcontact printing , 2008 .

[4]  Young-Man Choi,et al.  Mechanism of reverse-offset printing , 2015 .

[5]  Yeonkyeong Ju,et al.  Roll-offset printed transparent conducting electrode for organic solar cells , 2015 .

[6]  Chung-Yuen Hui,et al.  Effect of stamp deformation on the quality of microcontact printing: theory and experiment. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[7]  Jaeyoung Kim,et al.  All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils , 2010, IEEE Transactions on Electron Devices.

[8]  Jurriaan Huskens,et al.  Fabrication of Transistors on Flexible Substrates: from Mass‐Printing to High‐Resolution Alternative Lithography Strategies , 2012, Advanced materials.

[9]  Huihua Xu,et al.  Flexure-based Roll-to-roll Platform: A Practical Solution for Realizing Large-area Microcontact Printing , 2015, Scientific Reports.

[10]  Young-Man Choi,et al.  Enhancement of printing overlay accuracy by reducing the effects of mark deformations , 2017 .

[11]  Ok Chan Jeong,et al.  Measurement of nonlinear mechanical properties of PDMS elastomer , 2011 .

[12]  Dongwoo Kang,et al.  Development of a precision reverse offset printing system. , 2016, The Review of scientific instruments.

[13]  V. R. Raju,et al.  Paper-like electronic displays: Large-area rubber-stamped plastic sheets of electronics and microencapsulated electrophoretic inks , 2001, Proceedings of the National Academy of Sciences of the United States of America.

[14]  Kwang-Young Kim,et al.  Quantitative measurement of ink-blanket adhesion for contact transfer printing inks , 2015 .

[15]  Inyoung Kim,et al.  Roll offset printing process based on interface separation for fine and smooth patterning , 2013 .

[16]  George M. Whitesides,et al.  Soft lithography and microfabrication , 1998 .

[17]  J. Rogers,et al.  Recent progress in soft lithography , 2005 .

[18]  Jeongdai Jo,et al.  Investigation on synchronization of the offset printing process for fine patterning and precision overlay , 2014 .

[19]  George M. Whitesides,et al.  Improved pattern transfer in soft lithography using composite stamps , 2002 .

[20]  G. Whitesides,et al.  Unconventional Methods for Fabricating and Patterning Nanostructures. , 1999, Chemical reviews.

[21]  Jongsu Lee,et al.  Register mark measurement errors in high-precision roll-to-roll continuous systems: The effect of register mark geometry on measurement error , 2016 .

[22]  Young Tae Cho,et al.  Overlay accuracy on a flexible web with a roll printing process based on a roll-to-roll system. , 2015, The Review of scientific instruments.

[23]  Hirobumi Ushijima,et al.  Overlay of semi-dried functional layers in offset printing for rapid and high-precision fabrication of flexible TFTs , 2014 .

[24]  David W. Murray,et al.  Nonlinear Finite Element Analysis of Steel Frames , 1983 .

[25]  Hirofumi Nakajima,et al.  30.2: Flexible OLEDs Poster with Gravure Printing Method , 2005 .

[26]  Boris Kobrin,et al.  Rolling mask nanolithography: the pathway to large area and low cost nanofabrication , 2012, Other Conferences.

[27]  John A. Rogers,et al.  Collapse of stamps for soft lithography due to interfacial adhesion , 2005 .

[28]  Jun Woo Kim,et al.  Transparent conductive film with printable embedded patterns for organic solar cells , 2013 .

[29]  G. Whitesides,et al.  Soft lithographic methods for nano-fabrication , 1997 .