Manipulation of Uncertainties in the Determination of Optimal Machining Conditions Under Multiple Criteria
暂无分享,去创建一个
[1] Singiresu S Rao,et al. COMPUTERIZED SELECTION OF OPTIMUM MACHINING CONDITIONS FOR A JOB REQUIRING MULTIPLE OPERATIONS. , 1977 .
[2] Singiresu S Rao,et al. Determination of Optimum Machining Conditions—Deterministic and Probabilistic Approaches , 1976 .
[3] D. S. Ermer,et al. Optimization of the Constrained Machining Economics Problem by Geometric Programming , 1971 .
[4] M. Field,et al. Computerized Determination and Analysis of Cost and Production Rates for Machining Operations: Part 2—Milling, Drilling, Reaming, and Tapping , 1969 .
[5] J. S. Agapiou,et al. The Optimization of Machining Operations Based on a Combined Criterion, Part 1: The Use of Combined Objectives in Single-Pass Operations , 1992 .
[6] Jaroslaw Sobieszczanskisobieski,et al. On the sensitivity of complex, internally coupled systems , 1988 .
[7] I. S. Jawahir,et al. Predicting total machining performance in finish turning using integrated fuzzy-set models of the machinability parameters , 1994 .
[8] D. S. Ermer,et al. Optimization of Multipass Turning With Constraints , 1981 .
[9] Singiresu S. Rao,et al. Nonlinear Membership Functions in Multiobjective Fuzzy Optimization of Mechanical and Structural Systems , 1992 .
[10] Singiresu S. Rao. Multi‐objective optimization of fuzzy structural systems , 1987 .
[11] Ruxu Du,et al. Tool condition monitoring in turning using fuzzy set theory , 1992 .
[12] Singiresu S Rao,et al. Generalized hybrid method for fuzzy multiobjective optimization of engineering systems , 1996 .
[13] J. S. Agapiou. The Optimization of Machining Operations Based on a Combined Criterion, Part 2: Multipass Operations , 1992 .