Flexural performance of 3D-printed composite beams with ECC and recycled fine aggregate concrete: Experimental and numerical analysis

[1]  Charles K. S. Moy,et al.  Numerical and analytical optimisation of functionally graded concrete incorporating steel fibres and recycled aggregate , 2022, Construction and Building Materials.

[2]  X. Fu,et al.  Flexural performance of layered macro fiber reinforced concrete beams , 2022, Construction and Building Materials.

[3]  J. Dai,et al.  Recent developments in Engineered/Strain-Hardening Cementitious Composites (ECC/SHCC) with high and ultra-high strength , 2022, Construction and Building Materials.

[4]  V. Li,et al.  Time-dependent fresh properties characterization of 3D printing engineered cementitious composites (3DP-ECC): On the evaluation of buildability , 2022, Cement and Concrete Composites.

[5]  A. du Plessis,et al.  Evaluating the effects of porosity on the mechanical properties of extrusion-based 3D printed concrete , 2022, Cement and Concrete Research.

[6]  B. Šavija,et al.  Design and analyses of printable strain hardening cementitious composites with optimized particle size distribution , 2022, Construction and Building Materials.

[7]  Jiangtao Yu,et al.  Shaking-Table Test on a Two-Story Timber-Framed Masonry Structure Retrofitted with Ultra-High Ductile Concrete , 2022, Journal of Structural Engineering.

[8]  Hailong Wang,et al.  Bond shear performances and constitutive model of interfaces between vertical and horizontal filaments of 3D printed concrete , 2022, Construction and Building Materials.

[9]  Xiu-li Du,et al.  Dynamic size effect in shear behavior of BFRP reinforced concrete beams without stirrups with different shear-span ratios , 2021, International Journal of Impact Engineering.

[10]  T. Ding,et al.  Bending behaviour of steel cable reinforced 3D printed concrete in the direction perpendicular to the interfaces , 2021, Cement and Concrete Composites.

[11]  A. Perrot,et al.  From analytical methods to numerical simulations : A process engineering toolbox for 3D concrete printing , 2021 .

[12]  Yimiao Huang,et al.  Tensile and flexural properties of 3D-printed jackets-reinforced mortar , 2021 .

[13]  Walter Kaufmann,et al.  Structural behaviour of 3D printed concrete beams with various reinforcement strategies , 2021, Engineering Structures.

[14]  Jinlong Pan,et al.  Mechanical properties of engineered cementitious composites beams fabricated by extrusion-based 3D printing , 2021, Engineering Structures.

[15]  T. Zhao,et al.  Flexural behavior of plain concrete beams containing strain hardening cementitious composite layers with High-Volume fly ash , 2021, Construction and Building Materials.

[16]  Matheus Pimentel Tinoco,et al.  Repair of pre-damaged RC beams using hybrid fiber reinforced strain hardening cementitious composites , 2021 .

[17]  V. Li,et al.  3D-printable engineered cementitious composites (3DP-ECC): Fresh and hardened properties , 2021 .

[18]  Jianzhuang Xiao,et al.  Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber , 2021 .

[19]  G. Ma,et al.  Strength and ductility enhancement of 3D printing structure reinforced by embedding continuous micro-cables , 2020 .

[20]  T. Ding,et al.  Printability and advantages of 3D printing mortar with 100% recycled sand , 2020 .

[21]  Hua Li,et al.  Effects of interlayer notch and shear stress on interlayer strength of 3D printed cement paste , 2020 .

[22]  Jianzhuang Xiao,et al.  Finite element analysis on the anisotropic behavior of 3D printed concrete under compression and flexure , 2020 .

[23]  Yu Wang,et al.  3D recycled mortar printing: System development, process design, material properties and on-site printing , 2020 .

[24]  G. Ma,et al.  Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: Experiments and molecular dynamics studies , 2020 .

[25]  Yu Wang,et al.  Hardened properties of layered 3D printed concrete with recycled sand , 2020 .

[26]  Gieljan Vantyghem,et al.  3D printing of a post-tensioned concrete girder designed by topology optimization , 2020 .

[27]  Fang Wang,et al.  Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing , 2019, Construction and Building Materials.

[28]  Richard A. Buswell,et al.  3D printing using concrete extrusion: A roadmap for research , 2018, Cement and Concrete Research.

[29]  Jianzhuang Xiao,et al.  Feasibility of using ultra-high ductility cementitious composites for concrete structures without steel rebar , 2018, Engineering Structures.

[30]  Z. Ahmed,et al.  Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete , 2017, Materials.

[31]  Jin-Guang Teng,et al.  Finite element modeling of debonding failures in FRP-strengthened RC beams , 2015 .

[32]  Jian fei Chen,et al.  Mechanical Properties of Structures 3D-Printed With Cementitious Powders , 2015, 3D Concrete Printing Technology.

[33]  Jun Zhang,et al.  Simulation of flexural performance of layered ECC-concrete composite beam with fracture mechanics model , 2014 .

[34]  B. Šavija,et al.  Tailoring strain-hardening cementitious composite repair systems through numerical experimentation , 2014 .

[35]  G. Gao,et al.  Behaviors of semi‐precast beam made of recycled aggregate concrete , 2014 .

[36]  H. Yun.  Flexural behavior and crack-damage mitigation of plain concrete beam with a strain-hardening cement composite (SHCC) layer at tensile region , 2013 .

[37]  Guangming Chen,et al.  On the finite element modelling of RC beams shear-strengthened with FRP , 2012 .

[38]  A. Gibb,et al.  Hardened properties of high-performance printing concrete , 2012 .

[39]  Tao Yu,et al.  Finite element modeling of confined concrete-II: Plastic-damage model , 2010 .

[40]  P. Camanho,et al.  Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials , 2003 .

[41]  V. Li,et al.  Monotonic and fatigue performance in bending of fiber-reinforced engineered cementitious composite in overlay system , 2002 .

[42]  D. K. Mishra,et al.  Structural applications of engineered cementitious composites , 1996 .

[43]  L. P. Sanez,et al.  DISCUSSION OF EQUATION FOR THE STRESS - STRAIN CURVE OF CONCRETE’ BY DESAYI AND KRISHNAN , 1964 .