Highly efficient inverted polymer solar cells based on a cross-linkable water-/alcohol-soluble conjugated polymer interlayer.

A cross-linkable water/alcohol soluble conjugated polymer (WSCP) material poly[9,9-bis(6'-(N,N-diethylamino)propyl)-fluorene-alt-9,9-bis(3-ethyl(oxetane-3-ethyloxy)-hexyl) fluorene] (PFN-OX) was designed. The cross-linkable nature of PFN-OX is good for fabricating inverted polymer solar cells (PSCs) with well-defined interface and investigating the detailed working mechanism of high-efficiency inverted PSCs based on poly[4,8-bis(2-ethylhexyloxyl)benzo[1,2-b:4,5-b']dithio-phene-2,6-diyl-alt-ethylhexyl-3-fluorothithieno[3,4-b]thiophene-2-carboxylate-4,6-diyl] (PTB7) and (6,6)-phenyl-C71-butyric acid methyl ester (PC71BM) blend active layer. The detailed working mechanism of WSCP materials in high-efficiency PSCs were studied and can be summarized into the following three effects: a) PFN-OX tunes cathode work function to enhance open-circuit voltage (Voc); b) PFN-OX dopes PC71BM at interface to facilitate electron extraction; and c) PFN-OX extracts electrons and blocks holes to enhance fill factor (FF). On the basis of this understanding, the hole-blocking function of the PFN-OX interlayer was further improved with addition of a ZnO layer between ITO and PFN-OX, which led to inverted PSCs with a power conversion efficiency of 9.28% and fill factor high up to 74.4%.

[1]  Fei Huang,et al.  Enhanced Photovoltaic Performance by Modulating Surface Composition in Bulk Heterojunction Polymer Solar Cells Based on PBDTTT‐C‐T/PC71BM , 2014, Advanced materials.

[2]  A. Jen,et al.  In situ doping and crosslinking of fullerenes to form efficient and robust electron-transporting layers for polymer solar cells , 2014 .

[3]  Yang Yang,et al.  Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency , 2013, Scientific Reports.

[4]  F. Huang,et al.  Recent advances in water/alcohol-soluble π-conjugated materials: new materials and growing applications in solar cells. , 2013, Chemical Society reviews.

[5]  Fei Huang,et al.  High-efficiency polymer solar cells via the incorporation of an amino-functionalized conjugated metallopolymer as a cathode interlayer. , 2013, Journal of the American Chemical Society.

[6]  A. Heeger,et al.  Toward green solvent processable photovoltaic materials for polymer solar cells: the role of highly polar pendant groups in charge carrier transport and photovoltaic behavior , 2013 .

[7]  Hongbin Wu,et al.  Interface investigation of the alcohol-/water-soluble conjugated polymer PFN as cathode interfacial layer in organic solar cells , 2013 .

[8]  Shi-jian Su,et al.  A Series of New Medium‐Bandgap Conjugated Polymers Based on Naphtho[1,2‐c:5,6‐c]bis(2‐octyl‐[1,2,3]triazole) for High‐Performance Polymer Solar Cells , 2013, Advanced materials.

[9]  Alan J. Heeger,et al.  Barium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells , 2013, Scientific Reports.

[10]  Yiwang Chen,et al.  Influences of charge of conjugated polymer electrolytes cathode interlayer for bulk-heterojunction polymer solar cells , 2013 .

[11]  Y. Chang,et al.  Conjugated polyelectrolyte and zinc oxide stacked structure as an interlayer in highly efficient and stable organic photovoltaic cells , 2013 .

[12]  A. Jen,et al.  Solution‐Processible Highly Conducting Fullerenes , 2013, Advanced materials.

[13]  T. Riedl,et al.  Ultrathin interlayers of a conjugated polyelectrolyte for low work-function cathodes in efficient inverted organic solar cells , 2013 .

[14]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[15]  Yanhua Xie,et al.  Thermal annealing influence on poly(3-hexyl-thiophene)/phenyl-C61-butyric acid methyl ester-based solar cells with anionic conjugated polyelectrolyte as cathode interface layer , 2012 .

[16]  Miao Xu,et al.  Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure , 2012, Nature Photonics.

[17]  Talha M. Khan,et al.  A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics , 2012, Science.

[18]  Yongfang Li,et al.  High‐Performance Inverted Polymer Solar Cells with Solution‐Processed Titanium Chelate as Electron‐Collecting Layer on ITO Electrode , 2012, Advanced materials.

[19]  Alex K.-Y. Jen,et al.  Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells , 2012 .

[20]  Z. Bao,et al.  2-(2-Methoxyphenyl)-1,3-dimethyl-1H-benzoimidazol-3-ium iodide as a new air-stable n-type dopant for vacuum-processed organic semiconductor thin films. , 2012, Journal of the American Chemical Society.

[21]  Suren A. Gevorgyan,et al.  Stability of Polymer Solar Cells , 2012, Advanced materials.

[22]  Yang Yang,et al.  Polymer solar cells , 2012, Nature Photonics.

[23]  F. Huang,et al.  A novel crosslinkable electron injection/transporting material for solution processed polymer light-emitting diodes , 2011 .

[24]  Yong Cao,et al.  Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells , 2011, Advanced materials.

[25]  Hongbin Wu,et al.  Highly Efficient Electron Injection from Indium Tin Oxide/Cross-Linkable Amino-Functionalized Polyfluorene Interface in Inverted Organic Light Emitting Devices , 2011 .

[26]  Christophe Serbutoviez,et al.  Influence of substrate surface chemistry on the performance of top-gate organic thin-film transistors. , 2011, Journal of the American Chemical Society.

[27]  Yanming Sun,et al.  Inverted Polymer Solar Cells Integrated with a Low‐Temperature‐Annealed Sol‐Gel‐Derived ZnO Film as an Electron Transport Layer , 2011, Advanced materials.

[28]  Fei Huang,et al.  Water/Alcohol Soluble Conjugated Polymers as Highly Efficient Electron Transporting/Injection Layer in Optoelectronic Devices , 2010 .

[29]  Alex K.-Y. Jen,et al.  A Review on the Development of the Inverted Polymer Solar Cell Architecture , 2010 .

[30]  Seung-Hwan Oh,et al.  Water‐Soluble Polyfluorenes as an Interfacial Layer Leading to Cathode‐Independent High Performance of Organic Solar Cells , 2010 .

[31]  Christoph J. Brabec,et al.  Interface materials for organic solar cells , 2010 .

[32]  Junbiao Peng,et al.  Solution-Processed Zinc Oxide Thin Film as a Buffer Layer for Polymer Solar Cells with an Inverted Device Structure , 2010 .

[33]  오승환,et al.  Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes , 2010 .

[34]  Gang Li,et al.  Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells , 2009 .

[35]  Y. Arakawa,et al.  Threshold voltage control of bottom-contact n-channel organic thin-film transistors using modified drain/source electrodes , 2009 .

[36]  Stephen R. Forrest,et al.  Open circuit voltage enhancement due to reduced dark current in small molecule photovoltaic cells , 2009 .

[37]  Gang Li,et al.  Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer , 2008 .

[38]  K. Walzer,et al.  Highly Efficient Organic Devices Based on Electrically Doped Transport Layers , 2007 .

[39]  Christoph J. Brabec,et al.  Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact , 2006 .

[40]  Sean E. Shaheen,et al.  Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer , 2006 .

[41]  Vishal Shrotriya,et al.  Efficient inverted polymer solar cells , 2006 .

[42]  Stephen R. Forrest,et al.  New charge-carrier blocking materials for high efficiency OLEDs , 2003 .

[43]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.