Failure analysis on over-temperature combustion of transformers in 4 MW offshore wind turbines

[1]  L. Young.  Temperature rise during formation of anodic oxide films , 1957 .

[2]  P. Nanni,et al.  High-temperature oxidation of copper-manganese alloys , 1979 .

[3]  Characterization of Copper Oxide Layers by Electrochemical Methods , 1997 .

[4]  Wilsun Xu,et al.  A Sequential Phase Energization Method for Transformer Inrush Current Reduction—Transient Performance and Practical Considerations , 2007, IEEE Transactions on Power Delivery.

[5]  Dinesh G. Bansal,et al.  Behavior of Copper-Aluminum Tribological Pair under High Current Densities , 2008 .

[6]  Chanan Singh,et al.  A quantitative approach to wind farm diversification and reliability , 2011 .

[7]  Xiaogang Li,et al.  Corrosion products of reverse crevice corrosion of copper , 2011 .

[8]  S. Jia,et al.  Experimental Investigation of Electrode Erosion of Trigatron in Microsecond Arc Discharge Process , 2014, IEEE Transactions on Plasma Science.

[9]  V. Zverev,et al.  Erosion of a component cathode of triggered vacuum gaps in arc discharges , 2014 .

[10]  Zhen‐Guo Yang,et al.  Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part I: Corrosion and wear , 2014 .

[11]  Zhen‐Guo Yang,et al.  Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part II: Erosion and cavitation corrosion , 2014 .

[12]  Zhi-Dong Liu,et al.  Mechanism of Electrical Discharge Machining Ablation , 2014 .

[13]  Guoqiang Wang,et al.  The key technologies and development of offshore wind farm in China , 2014 .

[14]  Dong Hyawn Kim,et al.  Reliability analysis of offshore wind turbine support structures under extreme ocean environmental loads , 2015 .

[15]  Zhen‐Guo Yang,et al.  Failure analysis on unexpected wall thinning of heat-exchange tubes in ammonia evaporators , 2015 .

[16]  Johanna L. Mathieu,et al.  Relation between overheating of distribution transformers and switching frequency of electric loads used for demand response , 2015, 2015 North American Power Symposium (NAPS).

[17]  Andrew D. Sorensen,et al.  Multi-hazard analysis of a wind turbine concrete foundation under wind fatigue and seismic loadings , 2015 .

[18]  Hamid Davoudpour,et al.  Risk assessment of wind turbines: Transition from pure mechanistic paradigm to modern complexity paradigm , 2015 .

[19]  M. Kang,et al.  Fatigue failure of a composite wind turbine blade at its root end , 2015 .

[20]  K. S. Kassi,et al.  Impact of local overheating on conventional and hybrid insulations for power transformers , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[21]  Shi Yan,et al.  Failure analysis on circulating water pump of duplex stainless steel in 1000 MW ultra-supercritical thermal power unit , 2015 .

[22]  J. Valícek,et al.  SEM, EDS and XPS Analysis of the Coatings Obtained on Titanium after Plasma Electrolytic Oxidation in Electrolytes Containing Copper Nitrate , 2016, Materials.

[23]  Xin Jin,et al.  System safety analysis of large wind turbines , 2016 .

[24]  Wang Xiangzhi,et al.  Microcosmic mechanism of electrical discharge machining ablation on titanium alloy , 2016 .

[25]  Xin Jin,et al.  Research on wind turbine safety analysis: Failure analysis, reliability analysis, and risk assessment , 2016 .

[26]  Lina Bertling Tjernberg,et al.  Analysis of SCADA data for early fault detection with application to the maintenance management of wind turbines , 2016 .

[27]  Xu Zhang,et al.  Floating offshore wind turbine reliability analysis based on system grading and dynamic FTA , 2016 .

[28]  J. Janek,et al.  Reaction Mechanism and Surface Film Formation of Conversion Materials for Lithium- and Sodium-Ion Batteries: An XPS Case Study on Sputtered Copper Oxide (CuO) Thin Film Model Electrodes , 2016 .

[29]  Li Xiaomin,et al.  Studies on XPS valence state analysis of copper materials , 2016, 2016 IEEE 37th International Electronics Manufacturing Technology (IEMT) & 18th Electronics Materials and Packaging (EMAP) Conference.

[30]  Jianzhong Xu,et al.  Structural failure analysis of wind turbines impacted by super typhoon Usagi , 2016 .

[31]  Sanjay R. Arwade,et al.  Directional effects on the reliability of non-axisymmetric support structures for offshore wind turbines under extreme wind and wave loadings , 2016 .

[32]  Hongwei Liu,et al.  Fault analysis of wind turbines in China , 2016 .

[33]  T. Turek,et al.  Oxidation of copper at high temperature as an example for gas-solid reactions in a downer reactor – experiments and model-based analysis , 2016 .

[34]  William P. Schonberg,et al.  Fragility analysis of a 5-MW NREL wind turbine considering aero-elastic and seismic interaction using finite element method , 2016 .

[35]  John Dalsgaard Sørensen,et al.  Reliability Analysis of Fatigue Fracture of Wind Turbine Drivetrain Components , 2016 .

[36]  K. Gao,et al.  Crevice corrosion of copper for radioactive waste packaging material in simulated groundwater , 2016 .

[37]  Yibing Liu,et al.  Multi-fault detection and failure analysis of wind turbine gearbox using complex wavelet transform , 2016 .

[38]  Yi Gong,et al.  Failure analysis of heat exchanger tubes in petrochemical industry: Microscopic analysis approach , 2016 .

[39]  Statistical analysis of particulate concentration from electrode erosion of gas discharge , 2017 .

[40]  Zhen‐Guo Yang,et al.  Failure analysis on abnormal corrosion of economizer tubes in a waste heat boiler , 2017 .

[41]  Wang Yu,et al.  A case study of sample entropy analysis to the fault detection of bearing in wind turbine , 2017 .

[42]  John P.T. Mo,et al.  Life Cycle Reliability and Maintenance Analyses of Wind Turbines , 2017 .

[43]  Jie Tang,et al.  Failure analysis on abnormal wear of roller bearings in gearbox for wind turbine , 2017 .

[44]  Hai Sun,et al.  Risk assessment of floating offshore wind turbine based on correlation-FMEA , 2017 .

[45]  Angel Ramos,et al.  Influence of tertiary stabilizing windings on zero-sequence performance of three-phase three-legged YNynd transformers. Part II: Tank overheating hazard and short-circuit duty , 2017 .

[46]  Qun Ding,et al.  Failure analysis of O-ring gaskets of the electric hydraulic system in the nuclear power plant , 2017 .

[47]  A. P. Ribaric,et al.  An improved-accuracy method for fatigue load analysis of wind turbine gearbox based on SCADA , 2018 .