8.2  kW high beam quality quasi-continuous-wave face-pumped Nd:YAG slab amplifier.

An 8 kW level quasi-continuous-wave (QCW) face-pumped 1064 nm slab laser with high beam quality was developed by a master oscillator power amplifier (MOPA) system. A single-mode fiber seed laser was amplified by two-stage single-pass Nd:YAG rod preamplifiers and four face-pumped Nd:YAG slab amplifiers. The slab amplifiers were well designed with uniform pumping and uniform cooling for well-distributed thermal and stress. A dynamically feedbacked optical aberration compensation device was employed to correct low-order optical aberration, and the residue high-order optical aberration was corrected by an adaptive optics system. The QCW MOPA delivered up to an average power of 8.2 kW with a pulse duration of 200 μs at a repetition rate of 400 Hz. The beam quality factor was measured to be β=3.5.

[1]  Ulrich Wittrock,et al.  Adaptive aberration control in laser amplifiers and laser resonators , 2003, SPIE LASE.

[2]  Feng Fei,et al.  Active compensation of low-order aberrations with reflective beam shaper , 2014 .

[3]  Yong Bo,et al.  A hybrid incoherent sequence combining of pulsed lasers based on refraction-displacement-pulsed-combining and polarization beam combining , 2013 .

[4]  Matteo Vannini,et al.  High-efficiency, high-power and low threshold Yb3+:YAG ceramic laser. , 2009, Optics express.

[5]  Xinyang Li,et al.  Enhancement of the beam quality of non-uniform output slab laser amplifier with a 39-actuator rectangular piezoelectric deformable mirror. , 2010, Optics express.

[6]  Dafu Cui,et al.  4350 W quasi-continuous-wave operation of a diode face-pumped ceramic Nd:YAG slab laser , 2014 .

[7]  S. M. Oak,et al.  A highly efficient and compact long pulse Nd:YAG rod laser with 540 J of pulse energy for welding application. , 2013, The Review of scientific instruments.

[8]  Dafu Cui,et al.  A kilowatt level diode-side-pumped QCW Nd:YAG ceramic laser , 2010 .

[9]  J. Sabbaghzadeh,et al.  Characterisation of solidification cracking in pulsed Nd:YAG laser welding of 2024 aluminium alloy , 2009 .

[10]  D. Cui,et al.  High-beam-quality, 5.1 J, 108 Hz diode-pumped Nd:YAG rod oscillator–amplifier laser system , 2006 .

[11]  Y. Hirano,et al.  100-W class diode-pumped Nd:YAG MOPA system with a double-stage relay-optics scheme , 1999 .

[12]  E. Khazanov,et al.  Spatial filters for high-peak-power multistage laser amplifiers. , 2007, Applied optics.

[13]  Martin Ostermeyer,et al.  Quasi-continuous-wave birefringence-compensated single- and double-rod Nd:YAG lasers. , 2002, Applied optics.

[14]  R. Byer,et al.  Zigzag slabs for solid-state laser amplifiers: batch fabrication and parasitic oscillation suppression. , 2006, Applied optics.

[15]  Yajing Guo,et al.  High-efficiency high-power QCW diode-side-pumped zigzag Nd:YAG ceramic slab laser , 2013 .

[16]  Wenjing Liu,et al.  Aberrations correction of a Nd:YAG slab amplifier using a compact adaptive optics system , 2010, SPIE/COS Photonics Asia.

[17]  Vincent Bagnoud,et al.  Independent phase and amplitude control of a laser beam by use of a single-phase-only spatial light modulator. , 2004, Optics letters.

[18]  J. S. Kim,et al.  Ultrasonic vibration aided laser welding of Al alloys: improvement of laser welding‐quality , 1995 .

[19]  Y. Bo,et al.  A 7.5 W quasi-continuous-wave sodium D2 laser generated from single-pass sum-frequency generation in LBO crystal , 2011 .

[20]  Compact high-efficiency 100-W-level diode-side-pumped Nd:YAG laser with linearly polarized TEM00 mode output. , 2010, Applied optics.

[21]  Bo Yong,et al.  33 W quasi-continuous-wave narrow-band sodium D-2a laser by sum-frequency generation in LBO , 2014 .