Optimum design of frames

Abstract In this paper optimum design of frames is discussed. Specifically, minimum weight design of steel frames in the elastic range of material behaviour is treated. The solution algorithm is designed and programmed for use on micro-computers to suit a design office environment. Stress and slenderness constraints are considered, however displacement constraints may readily be implemented. Three examples are given and the results are discussed.

[1]  Lucien A. Schmit,et al.  Optimum Structural Design with Dynamic Constraints , 1976 .

[2]  Moshe F. Rubinstein,et al.  Building Design Using Linear Programming , 1966 .

[3]  Donald A. Sawyer,et al.  Minimum Weight Plastic Design of Continuous Frames , 1964 .

[4]  Lucien A. Schmit,et al.  Frame Optimization Including Frequency Constraints , 1975 .

[5]  Edward J. Haug,et al.  Optimal design of frames with substructuring , 1980 .

[6]  B. Topping,et al.  Frame optimization and column design , 1984 .

[7]  Louis A. Hill.  Automated Optimum Cost Building Design , 1966 .

[8]  R. K. Livesley.  THE AUTOMATIC DESIGN OF STRUCTURAL FRAMES , 1956 .

[9]  Karl M. Romstad,et al.  Optimum Design of Framed Structures , 1968 .

[10]  Tsuneyoshi Nakamura,et al.  Optimum Design of Multistory Multispan Frames for Prescribed Elastic Compliance , 1983 .

[11]  K. I. Majid,et al.  The elastic–plastic analysis of frames by the theorems of structural variation , 1985 .

[12]  Craig J. Miller,et al.  Automatic design of tapered member gabled frames , 1979 .

[13]  Franklin Y. Cheng,et al.  Nonlinear Optimum Design of Dynamic Damped Frames , 1976 .

[14]  Castrenze Polizzotto,et al.  Limit Design of Frames with Axial Force-Bending Moment Interaction , 1979 .

[16]  I-Chen Hung,et al.  Plastic design of steel frames for minimum weight , 1966 .

[17]  Mehmet Polat Saka,et al.  THE THEOREMS OF STRUCTURAL VARIATION GENERALIZED FOR RIGIDLY JOINTED FRAMES. , 1978 .

[18]  A. Kounadis.  Interaction of the joint and of the lateral bracing stiffnesses for the optimum design of unbraced frames , 1983 .

[19]  Minimum Weight Design of Multistory, Multispan Plane Frames Subject to Reaction Constraints , 1976 .

[20]  Peter M. Wright,et al.  Automated design of rigid steel frames including member selection , 1978 .

[21]  Edward J. Haug,et al.  Optimal Design of Plane Frames , 1975 .

[22]  Bogdan O. Kuzmanovic,et al.  Optimum Plastic Design of Steel Frames , 1972 .

[23]  W. A. Thornton,et al.  A New Optimality Criterion Method for Large Scale Structures. , 1979 .

[24]  Peter M. Wright,et al.  Gradient Methods in Optimum Structural Design , 1975 .

[25]  Enrique I. Tabak,et al.  Optimality Criteria Method for Building Frames , 1981 .

[26]  Jacques Heyman,et al.  Automatic minimum weight design of steel frames , 1958 .

[27]  B. Tabarrok,et al.  A generalized energy approach to the optimum design of plates and skeletal structures , 1979 .

[28]  PLASTIC ANALYSIS AND SYNTHESIS OF FRAMES SUBJECTED TO MULTIPLE LOADINGS , 1976 .

[29]  J. Foulkes,et al.  The minimum-weight design of structural frames , 1954, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[30]  J. Heyman.  Plastic design of beams and plane frames for minimum material consumption , 1951 .

[31]  Kanji Imai,et al.  Minimum cost design of framed structures by the mini-max dual method , 1981 .

[32]  Lewis P. Felton,et al.  On Reliability-Based Structural Optimization for Earthquakes , 1980 .

[33]  Francois Cheong-Siat-Moy.  Inelastic Sway Buckling of Multistory Frames , 1976 .

[34]  Judith S. Liebman,et al.  Discrete Structural Optimization , 1981 .

[35]  Walter J Briggs,et al.  OPTIMUM DESIGN OF FRAMES USING LINEAR PROGRAMMING TECHNIQUES , 1978 .

[36]  K. Majid,et al.  Optimum design of hypertatic structures , 1972 .

[37]  Fred Moses,et al.  Optimum Structural Design Using Linear Programming , 1964 .

[38]  Mehmet Polat Saka,et al.  Optimum design of rigidly jointed frames , 1980 .

[39]  A. R. Toakley,et al.  Optimum Design Using Available Sections , 1968 .

[40]  Mohsen Mohamed Kamal Khalifa.  OPTIMUM PLASTIC DESIGN OF SPACE FRAMES. , 1977 .