Cyclic behaviors of the molten-salt packed-bed thermal storage system filled with cascaded phase change material capsules

Abstract A transient, one-dimensional dispersion-concentric model to numerically study the cyclic behaviors of the molten-salt packed-bed thermal energy storage system filled with cascaded phase change material (PCM) capsules is presented. Three different storage systems are investigated which include the non-cascaded system, the cascaded systems with 3 and 5 cascaded phase change temperatures (PCTs). Detailed characteristics of heat transfer between molten salt and the packed PCM capsules are discussed, and various numerical results are presented, including the temperature distributions of molten salt and PCM capsules, the variations in the molten-salt outlet temperature, the accumulated efficiency of each cycle. The results show that the non-cascaded system suffers from a low charging ratio and a long charging time due to the constrains of PCT while the cascaded systems especially with 5 cascaded PCTs are found to have both a fast discharging rate and a fast charging rate. The cyclic process of the cascaded system with 5 cascaded PCTs can reach to a repeatable state after some cycles, at which high accumulated efficiencies can be achieved. It is also found that the practical storage capacity of the storage system with cascaded PCM capsules depends highly on the threshold temperatures to stop the charging/discharging process.

[1]  M. Romero,et al.  Numerical analysis of charging and discharging performance of a thermal energy storage system with encapsulated phase change material , 2014 .

[2]  J. Pacheco,et al.  DEVELOPMENT OF A MOLTEN-SALT THERMOCLINE THERMAL STORAGE SYSTEM FOR PARABOLIC TROUGH PLANTS , 2001 .

[3]  Zhifeng Wang,et al.  Sensitivity analysis of the numerical study on the thermal performance of a packed-bed molten salt thermocline thermal storage system , 2012 .

[4]  Luisa F. Cabeza,et al.  Comparative study of different numerical models of packed bed thermal energy storage systems , 2013 .

[5]  S. C. Solanki,et al.  An analysis of a packed bed latent heat thermal energy storage system using PCM capsules: Numerical investigation , 2009 .

[6]  K. Nithyanandam,et al.  Analysis of a latent thermocline storage system with encapsulated phase change materials for concentrating solar power , 2014 .

[7]  Jon T. Van Lew,et al.  Experimental Investigation of Thermal Storage Processes in a Thermocline Tank , 2012 .

[8]  A. Faghri,et al.  A numerical analysis of phase-change problems including natural convection , 1990 .

[9]  S. Garimella,et al.  Molten-salt thermal energy storage in thermoclines under different environmental boundary conditions , 2010 .

[10]  Ruzhu Wang,et al.  Numerical heat transfer analysis of the packed bed latent heat storage system based on an effective packed bed model , 2010 .

[11]  R. Pitchumani,et al.  Optimization of an encapsulated phase change material thermal energy storage system , 2014 .

[12]  Jon T. Van Lew,et al.  Generalized charts of energy storage effectiveness for thermocline heat storage tank design and calibration , 2011 .

[13]  R. Velraj,et al.  Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources , 2007 .

[14]  Xin Li,et al.  Parametric study and standby behavior of a packed-bed molten salt thermocline thermal storage system , 2012 .

[15]  Chao Xu,et al.  Dynamic thermal performance analysis of a molten-salt packed-bed thermal energy storage system using PCM capsules , 2014 .

[16]  Hao Peng,et al.  Thermal investigation of PCM-based high temperature thermal energy storage in packed bed , 2014 .

[17]  K. Nithyanandam,et al.  Analysis of a Latent Thermocline Energy Storage System for Concentrating Solar Power Plants , 2012 .

[18]  Suresh V. Garimella,et al.  System-level simulation of a solar power tower plant with thermocline thermal energy storage , 2014 .

[19]  Jean-Pierre Bédécarrats,et al.  Study of a phase change energy storage using spherical capsules. Part II: Numerical modelling , 2009 .

[20]  Jean-Pierre Bédécarrats,et al.  Study of a phase change energy storage using spherical capsules. Part I: Experimental results , 2009 .

[21]  Suresh V. Garimella,et al.  Latent heat augmentation of thermocline energy storage for concentrating solar power – A system-level assessment , 2014 .

[22]  Zhifeng Wang,et al.  Effects of solid particle properties on the thermal performance of a packed-bed molten-salt thermocline thermal storage system , 2013 .

[23]  Oriol Lehmkuhl Barba,et al.  Numerical simulations of thermal energy storage systems with phase cahnge materials , 2011 .

[24]  M. Kenisarin.  High-temperature phase change materials for thermal energy storage , 2010 .

[25]  Suresh V. Garimella,et al.  Cyclic operation of molten-salt thermal energy storage in thermoclines for solar power plants , 2013 .

[26]  Oriol Lehmkuhl,et al.  A new thermocline-PCM thermal storage concept for CSP plants. Numerical analysis and perspectives , 2014 .

[27]  Sašo Medved,et al.  Free cooling of a building using PCM heat storage integrated into the ventilation system , 2007 .

[28]  Martin Belusko,et al.  An effectiveness-NTU model of a packed bed PCM thermal storage system , 2014 .

[29]  W. Tao,et al.  The impact of concrete structure on the thermal performance of the dual-media thermocline thermal storage tank using concrete as the solid medium , 2014 .

[30]  Peiwen Li,et al.  An enthalpy formulation for thermocline with encapsulated PCM thermal storage and benchmark solution using the method of characteristics , 2014 .