Additive manufacturing of biomaterials.
暂无分享,去创建一个
Dongxu Ke | Amit Bandyopadhyay | Susmita Bose | A. Bandyopadhyay | S. Bose | Dongxu Ke | Himanshu Sahasrabudhe | H. Sahasrabudhe
[1] Keming Chen,et al. The preliminary performance study of the 3D printing of a tricalcium phosphate scaffold for the loading of sustained release anti-tuberculosis drugs , 2015, Journal of Materials Science.
[2] Ali Khademhosseini,et al. Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography. , 2012, Biomaterials.
[3] Jos Malda,et al. Biofabrication of osteochondral tissue equivalents by printing topologically defined, cell-laden hydrogel scaffolds. , 2012, Tissue engineering. Part C, Methods.
[4] R. Kandel,et al. Polymeric crystallization and condensation of calcium polyphosphate glass , 2008 .
[5] R. Adhikari,et al. Biodegradable synthetic polymers for tissue engineering. , 2003, European cells & materials.
[6] J. Suwanprateeb,et al. Three-dimensional printing of porous polyethylene structure using water-based binders. , 2006, Journal of biomedical materials research. Part B, Applied biomaterials.
[7] S. Zhang,et al. Porous niobium coatings fabricated with selective laser melting on titanium substrates: Preparation, characterization, and cell behavior. , 2015, Materials science & engineering. C, Materials for biological applications.
[8] H. Kumar,et al. Laser boronising of Ti-6Al-4V as a result of laser alloying with pre-placed BN , 1999 .
[9] M. L. Griffith,et al. Ultraviolet Curing of Highly Loaded Ceramic Suspensions for Stereolithography of Ceramics , 1994 .
[10] Anthony Atala,et al. A 3D bioprinted complex structure for engineering the muscle–tendon unit , 2015, Biofabrication.
[11] Jason A Inzana,et al. 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration. , 2014, Biomaterials.
[12] J. Henckel,et al. Method for the location of primary wear scars from retrieved metal on metal hip replacements , 2015, BMC Musculoskeletal Disorders.
[13] Kodjo Boady Djagny,et al. Gelatin: A Valuable Protein for Food and Pharmaceutical Industries: Review , 2001, Critical reviews in food science and nutrition.
[14] Joaquim Ciurana,et al. Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process , 2013 .
[15] J. Mei,et al. Near net shape manufacturing of components using direct laser fabrication technology , 2003 .
[16] Anthony Atala,et al. 3D bioprinting of tissues and organs , 2014, Nature Biotechnology.
[17] Christian Bergmann,et al. 3D printing of bone substitute implants using calcium phosphate and bioactive glasses , 2010 .
[18] Dichen Li,et al. Fabrication of integral ceramic mold for investment casting of hollow turbine blade based on stereolithography , 2009 .
[19] Sanjay K. Nigam,et al. Organogenesis forum lecture , 2008 .
[20] Ivan P. Parkin,et al. Porous biocompatible implants and tissue scaffolds synthesized by selective laser sintering from Ti and NiTi , 2008 .
[21] K. Shakesheff,et al. Three‐Dimensional Bioactive and Biodegradable Scaffolds Fabricated by Surface‐Selective Laser Sintering , 2005, Advanced materials.
[22] Jukka Seppälä,et al. Porous 3D modeled scaffolds of bioactive glass and photocrosslinkable poly(ε-caprolactone) by stereolithography , 2013 .
[23] Ryan B. Wicker,et al. Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V , 2009 .
[24] P. Gatenholm,et al. 3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications. , 2015, Biomacromolecules.
[25] A. Bandyopadhyay,et al. Laser processed calcium phosphate reinforced CoCrMo for load-bearing applications: Processing and wear induced damage evaluation. , 2018, Acta biomaterialia.
[26] Francesco Montagna,et al. Silica moulds built by stereolithography , 2005 .
[27] A. Schambach,et al. Skin tissue generation by laser cell printing , 2012, Biotechnology and bioengineering.
[28] J. Beaman,et al. Processing of titanium net shapes by SLS/HIP , 1999 .
[29] Cristiano Quintini,et al. Three‐dimensional print of a liver for preoperative planning in living donor liver transplantation , 2013, Liver transplantation : official publication of the American Association for the Study of Liver Diseases and the International Liver Transplantation Society.
[30] A. Clare,et al. A parametric study of Inconel 625 wire laser deposition , 2013 .
[31] A. Bandyopadhyay,et al. Understanding of dopant-induced osteogenesis and angiogenesis in calcium phosphate ceramics. , 2013, Trends in biotechnology.
[32] F. Deng,et al. Polyetheretherketone/nano-fluorohydroxyapatite composite with antimicrobial activity and osseointegration properties. , 2014, Biomaterials.
[33] GeunHyung Kim,et al. A cryogenic direct-plotting system for fabrication of 3D collagen scaffolds for tissue engineering , 2009 .
[34] K H Kang,et al. Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds , 2012, Biofabrication.
[35] F. Kloss,et al. Degradation characteristics of α and β tri-calcium-phosphate (TCP) in minipigs , 2002 .
[36] Hermann Seitz,et al. In vitro -Osteoclastic Activity Studies on Surfaces of 3D Printed Calcium Phosphate Scaffolds , 2011, Journal of biomaterials applications.
[37] R. Poprawe,et al. Manufacturing of individual biodegradable bone substitute implants using selective laser melting technique. , 2011, Journal of biomedical materials research. Part A.
[38] S. Kurtz,et al. Porosity in Polyaryletheretherketone , 2012 .
[39] Colleen L Flanagan,et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.
[40] A. Bandyopadhyay,et al. Compositionally graded hydroxyapatite/tricalcium phosphate coating on Ti by laser and induction plasma. , 2011, Acta biomaterialia.
[41] F. Liou,et al. Modeling of laser cladding with powder injection , 2004 .
[42] Dong-Woo Cho,et al. Development of a bone scaffold using HA nanopowder and micro-stereolithography technology , 2007 .
[43] F. Lin,et al. Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique. , 2005, Biomaterials.
[44] Yanning Zhang,et al. Additive manufacturing of Ti-Si-N ceramic coatings on titanium , 2015 .
[45] K. Lu,et al. Effect of particle size on three dimensional printed mesh structures , 2009 .
[46] B Derby,et al. Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication. , 2003, Biomaterials.
[47] José M.F. Ferreira,et al. Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering , 2014 .
[48] Woong-Chul Kim,et al. An evaluation of marginal fit of three-unit fixed dental prostheses fabricated by direct metal laser sintering system. , 2013, Dental materials : official publication of the Academy of Dental Materials.
[49] Dong-Woo Cho,et al. Fabrication of a SFF-based three-dimensional scaffold using a precision deposition system in tissue engineering , 2008 .
[50] Dong-Woo Cho,et al. Fabrication and characteristic analysis of a poly(propylene fumarate) scaffold using micro-stereolithography technology. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.
[51] Shivakumar Raman,et al. Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). , 2010, Journal of the mechanical behavior of biomedical materials.
[52] S. Milz,et al. Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing , 2005, Journal of materials science. Materials in medicine.
[53] Hector F Rios,et al. Biomimetic hybrid scaffolds for engineering human tooth-ligament interfaces. , 2010, Biomaterials.
[54] Richard O C Oreffo,et al. Biocompatibility and osteogenic potential of human fetal femur-derived cells on surface selective laser sintered scaffolds. , 2009, Acta biomaterialia.
[55] R. Carrodeguas,et al. α-Tricalcium phosphate: synthesis, properties and biomedical applications. , 2010, Acta biomaterialia.
[56] J T Czernuszka,et al. Novel 3D collagen scaffolds fabricated by indirect printing technique for tissue engineering. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.
[57] H. Wong,et al. Cytocompatibility, osseointegration, and bioactivity of three-dimensional porous and nanostructured network on polyetheretherketone. , 2013, Biomaterials.
[58] Dichen Li,et al. Rapid fabrication of alumina-based ceramic cores for gas turbine blades by stereolithography and gelcasting , 2009 .
[59] M. von Walter,et al. Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming. , 2006, Biomaterials.
[60] Amit Bandyopadhyay,et al. In situ synthesized TiB-TiN reinforced Ti6Al4V alloy composite coatings: microstructure, tribological and in-vitro biocompatibility. , 2014, Journal of the mechanical behavior of biomedical materials.
[61] Michael J Yaszemski,et al. Poly(propylene fumarate) bone tissue engineering scaffold fabrication using stereolithography: effects of resin formulations and laser parameters. , 2007, Biomacromolecules.
[62] Q. Fu,et al. Bone regeneration in strong porous bioactive glass (13-93) scaffolds with an oriented microstructure implanted in rat calvarial defects. , 2013, Acta biomaterialia.
[63] Amit Bandyopadhyay,et al. Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds. , 2012, Dental materials : official publication of the Academy of Dental Materials.
[64] Emeka Nkenke,et al. Effects of bioactive glass and beta-TCP containing three-dimensional laser sintered polyetheretherketone composites on osteoblasts in vitro. , 2008, Journal of biomedical materials research. Part A.
[65] Amit Bandyopadhyay,et al. Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants. , 2008, Acta biomaterialia.
[66] L. Shaw,et al. Solid freeform fabrication of permanent dental restorations via slurry micro-extrusion , 2006 .
[67] Shoufeng Yang,et al. Extrusion-based additive manufacturing of PEEK for biomedical applications , 2015 .
[68] Ming-Chuan Leu,et al. In vitro assessment of laser sintered bioactive glass scaffolds with different pore geometries , 2015 .
[69] Gabriele Grimm,et al. Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants , 2007, Journal of materials science. Materials in medicine.
[70] P. Dubruel,et al. The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability. , 2014, Biomaterials.
[71] Wonhye Lee,et al. Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture , 2010, Experimental Neurology.
[72] V. Ocelík,et al. SiCp/Ti6Al4V functionally graded materials produced by laser melt injection , 2002 .
[73] Frank A. Müller,et al. Direct Printing of Bioceramic Implants with Spatially Localized Angiogenic Factors , 2007 .
[74] Toshiki Niino,et al. Avidin-biotin binding-based cell seeding and perfusion culture of liver-derived cells in a porous scaffold with a three-dimensional interconnected flow-channel network. , 2007, Biomaterials.
[75] Shuping Peng,et al. Structure and properties of nano-hydroxypatite scaffolds for bone tissue engineering with a selective laser sintering system , 2011, Nanotechnology.
[76] Sambit Sahoo,et al. Bioactive nanofibers for fibroblastic differentiation of mesenchymal precursor cells for ligament/tendon tissue engineering applications. , 2010, Differentiation; research in biological diversity.
[77] Noor Azuan Abu Osman,et al. Effect of Layer Thickness and Printing Orientation on Mechanical Properties and Dimensional Accuracy of 3D Printed Porous Samples for Bone Tissue Engineering , 2014, PloS one.
[78] Minlin Zhong,et al. Microstructural evolution in high power laser cladding of Stellite 6+ WC layers , 2002 .
[79] F. Lin,et al. Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system. , 2006, Tissue engineering.
[80] T. Webster,et al. An in vitro evaluation of the Ca/P ratio for the cytocompatibility of nano-to-micron particulate calcium phosphates for bone regeneration. , 2008, Acta biomaterialia.
[81] Christian Carpenter,et al. Stainless steel to titanium bimetallic structure using LENS , 2015 .
[82] S. Hollister,et al. Tissue engineering bone-ligament complexes using fiber-guiding scaffolds. , 2012, Biomaterials.
[83] Robert F. Singer,et al. Cellular Titanium by Selective Electron Beam Melting , 2007 .
[84] Vamsi Krishna Balla,et al. Laser processing of in situ synthesized TiB-TiN-reinforced Ti6Al4V alloy coatings , 2012 .
[85] F. Beckmann,et al. The morphology of anisotropic 3D-printed hydroxyapatite scaffolds. , 2008, Biomaterials.
[86] Guojian Xu,et al. Characteristic behaviours of clad layer by a multi-layer laser cladding with powder mixture of Stellite-6 and tungsten carbide , 2006 .
[87] F. E. Wiria,et al. Effects of sintering temperature on morphology and mechanical characteristics of 3D printed porous titanium used as dental implant. , 2013, Materials science & engineering. C, Materials for biological applications.
[88] C. V. van Blitterswijk,et al. Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique. , 2004, Biomaterials.
[89] Miguel Castilho,et al. Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects , 2014, Biofabrication.
[90] Yongnian Yan,et al. An cell-assembly derived physiological 3D model of the metabolic syndrome, based on adipose-derived stromal cells and a gelatin/alginate/fibrinogen matrix. , 2010, Biomaterials.
[91] Susmita Bose,et al. SiO2 and ZnO dopants in three-dimensionally printed tricalcium phosphate bone tissue engineering scaffolds enhance osteogenesis and angiogenesis in vivo. , 2013, Acta biomaterialia.
[92] R. Kandel,et al. Porous calcium polyphosphate scaffolds for bone substitute applications -- in vitro characterization. , 2001, Biomaterials.
[93] Antonio Greco,et al. Stereolitography of ceramic suspensions , 2001 .
[94] Dong-Yol Yang,et al. Advances in 3D nano/microfabrication using two-photon initiated polymerization , 2008 .
[95] Maria del Pilar Gutiérrez-Salazar,et al. Microhardness and chemical composition of human tooth , 2003 .
[96] B Vamsi Krishna,et al. Low stiffness porous Ti structures for load-bearing implants. , 2007, Acta biomaterialia.
[97] R. Jamison,et al. Bone response to 3D periodic hydroxyapatite scaffolds with and without tailored microporosity to deliver bone morphogenetic protein 2. , 2006, Journal of biomedical materials research. Part A.
[98] S. Kelly,et al. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterization , 2004 .
[99] Florencia Edith Wiria,et al. Property enhancement of 3D-printed alumina ceramics using vacuum infiltration , 2014 .
[100] Jake E. Barralet,et al. 3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies , 2008 .
[101] Reinhart Poprawe,et al. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium , 2012 .
[102] D. Cho,et al. Evaluation of solid free-form fabrication-based scaffolds seeded with osteoblasts and human umbilical vein endothelial cells for use in vivo osteogenesis. , 2010, Tissue engineering. Part A.
[103] Tatjana Dostalova,et al. Possibility of reconstruction of dental plaster cast from 3D digital study models , 2013, Biomedical engineering online.
[104] Peter Greil,et al. Polymer Derived Engineering Ceramics , 2000 .
[105] Amit Bandyopadhyay,et al. 3D printed tricalcium phosphate bone tissue engineering scaffolds: effect of SrO and MgO doping on in vivo osteogenesis in a rat distal femoral defect model , 2013 .
[106] G D Janaki Ram,et al. Microstructure and wear properties of LENS® deposited medical grade CoCrMo , 2008, Journal of materials science. Materials in medicine.
[107] K. Leong,et al. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. , 2003, Biomaterials.
[108] John N. DuPont,et al. Fabrication of functionally graded TiC/Ti composites by Laser Engineered Net Shaping , 2003 .
[109] K. Leong,et al. Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.
[110] Susmita Bose,et al. Polycaprolactone-Coated 3D Printed Tricalcium Phosphate Scaffolds for Bone Tissue Engineering: In Vitro Alendronate Release Behavior and Local Delivery Effect on In Vivo Osteogenesis , 2014, ACS applied materials & interfaces.
[111] John W. Halloran,et al. Stereolithography of ceramic suspensions , 1997 .
[112] T. Yue,et al. Microstructure and formation mechanism of in situ synthesized TiC/Ti surface MMC on Ti-6Al-4V by laser cladding , 2001 .
[113] E. Toyserkani,et al. Solid freeform fabrication of porous calcium polyphosphate structures for bone substitute applications: in vivo studies. , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.
[114] Nicholas Dunne,et al. Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique. , 2014, Materials science & engineering. C, Materials for biological applications.
[115] Valmik Bhavar,et al. A review on powder bed fusion technology of metal additive manufacturing , 2017 .
[116] P. Marchal,et al. Rheological properties of PZT suspensions for stereolithography , 2002 .
[117] Umut A. Gurkan,et al. Engineering Anisotropic Biomimetic Fibrocartilage Microenvironment by Bioprinting Mesenchymal Stem Cells in Nanoliter Gel Droplets , 2014, Molecular pharmaceutics.
[118] Faleh Tamimi,et al. Osseointegration of dental implants in 3D-printed synthetic onlay grafts customized according to bone metabolic activity in recipient site. , 2014, Biomaterials.
[119] A. Bandyopadhyay,et al. Understanding in vivo response and mechanical property variation in MgO, SrO and SiO₂ doped β-TCP. , 2011, Bone.
[120] V. Ocelík,et al. Ti–6Al–4V strengthened by laser melt injection of WCp particles , 2002 .
[121] Eduardo Saiz,et al. Fracture modes under uniaxial compression in hydroxyapatite scaffolds fabricated by robocasting. , 2007, Journal of biomedical materials research. Part A.
[122] Jukka Seppälä,et al. Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling. , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.
[123] Z. Yaping,et al. Laser surface coating of a bioceramic composite layer , 1993 .
[124] Dong-Woo Cho,et al. Development of a bi-pore scaffold using indirect solid freeform fabrication based on microstereolithography technology , 2009 .
[125] S. E. Feinberg,et al. Hydroxyapatite implants with designed internal architecture , 2001, Journal of materials science. Materials in medicine.
[126] S. Teoh,et al. Scaffold design and in vitro study of osteochondral coculture in a three-dimensional porous polycaprolactone scaffold fabricated by fused deposition modeling. , 2003, Tissue engineering.
[127] M. J. Edirisinghe,et al. Solid freeform fabrication of ceramics , 2003 .
[128] T J Joyce,et al. Early failure of metal-on-metal bearings in hip resurfacing and large-diameter total hip replacement: A consequence of excess wear. , 2010, The Journal of bone and joint surgery. British volume.
[129] Boeun Lee,et al. Novel processing of iron-manganese alloy-based biomaterials by inkjet 3-D printing. , 2013, Acta biomaterialia.
[130] J. D. Ayers,et al. A Laser Processing Technique for Improving the Wear Resistance of Metals , 1981 .
[131] Nan Ma,et al. Laser printing of skin cells and human stem cells. , 2010, Tissue engineering. Part C, Methods.
[132] Glenn D Prestwich,et al. Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates. , 2010, Biomaterials.
[133] W. Dhert,et al. Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. , 2008, Tissue engineering. Part A.
[134] J.-P. Kruth,et al. Microstructure and mechanical properties of a novel β titanium metallic composite by Selective Laser Melting , 2014 .
[135] Benjamin M. Wu,et al. Scaffold fabrication by indirect three-dimensional printing. , 2005, Biomaterials.
[136] T. Boland,et al. Human microvasculature fabrication using thermal inkjet printing technology. , 2009, Biomaterials.
[137] Carola Esposito Corcione,et al. Free form fabrication of silica moulds for aluminium casting by stereolithography , 2006 .
[138] Mark A. Ganter,et al. A review of process development steps for new material systems in three dimensional printing (3DP) , 2008 .
[139] D. Hutmacher,et al. Scaffold development using 3D printing with a starch-based polymer , 2002 .
[140] Stephen C. Danforth,et al. Processing of Piezocomposites by Fused Deposition Technique , 2005 .
[141] W. Steen,et al. Laser Surface Alloying of Titanium Substrates with Carbon and Nitrogen , 1985 .
[142] A. Bandyopadhyay,et al. Wear Performance of Laser Processed Tantalum Coatings. , 2011, Materials science & engineering. C, Materials for biological applications.
[143] Xiumei Mo,et al. Artery vessel fabrication using the combined fused deposition modeling and electrospinning techniques , 2011 .
[144] Leszek Hozer,et al. Fabrication of functionally graded reaction infiltrated SiC–Si composite by three-dimensional printing (3DP™) process , 2001 .
[145] Scott C. Brown,et al. A three-dimensional osteochondral composite scaffold for articular cartilage repair. , 2002, Biomaterials.
[146] F. E. Wiria,et al. Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering , 2007 .
[147] Delbert E Day,et al. Growth and differentiation of osteoblastic cells on 13-93 bioactive glass fibers and scaffolds. , 2008, Acta biomaterialia.
[148] Amit Bandyopadhyay,et al. Functionally graded Co-Cr-Mo coating on Ti-6Al-4V alloy structures. , 2008, Acta biomaterialia.
[149] S. Kurtz. Chemical and Radiation Stability of PEEK , 2019, PEEK Biomaterials Handbook.
[150] Gean V. Salmoria,et al. Structure and mechanical properties of cellulose based scaffolds fabricated by selective laser sintering , 2009 .
[151] F. Lusquiños,et al. Alloying of hydroxyapatite onto Ti6Al–4V by high power laser irradiation , 2002, Journal of materials science. Materials in medicine.
[152] Zhongmin Jin,et al. Design and fabrication of a novel porous implant with pre-set channels based on ceramic stereolithography for vascular implantation , 2011, Biofabrication.
[153] D. D’Lima,et al. Direct human cartilage repair using three-dimensional bioprinting technology. , 2012, Tissue engineering. Part A.
[154] Wim E Hennink,et al. 25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.
[155] Youxin Hu,et al. Mechanical characteristics of solid-freeform-fabricated porous calcium polyphosphate structures with oriented stacked layers. , 2011, Acta biomaterialia.
[156] Robert Liska,et al. Lithography‐Based Additive Manufacturing of Cellular Ceramic Structures , 2012 .
[157] Dong-Woo Cho,et al. Cell adhesion and proliferation evaluation of SFF-based biodegradable scaffolds fabricated using a multi-head deposition system , 2009, Biofabrication.
[158] Di Wang,et al. Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting , 2013 .
[159] B. Derby,et al. Manufacture of biomaterials by a novel printing process , 2002, Journal of materials science. Materials in medicine.
[160] Inger Odnevall Wallinder,et al. In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting. , 2014, Dental materials : official publication of the Academy of Dental Materials.
[161] John W. Halloran,et al. Ceramic Stereolithography for Investment Casting and Biomedical Applications , 1995 .
[162] Antonio Ravaglioli,et al. Bioceramics: Materials · Properties · Applications , 1991 .
[163] Suman Das,et al. 3D printing of biomaterials , 2015 .
[164] R. Landers,et al. Biofunctional rapid prototyping for tissue‐engineering applications: 3D bioplotting versus 3D printing , 2004 .
[165] J.L. Martinez,et al. Comparison of Microstructures and Mechanical Properties for Solid and Mesh Cobalt-Base Alloy Prototypes Fabricated by Electron Beam Melting , 2010 .
[166] M. Vallet‐Regí,et al. Hydroxyapatite/β-tricalcium phosphate/agarose macroporous scaffolds for bone tissue engineering , 2008 .
[167] Rémy Glardon,et al. Sintering of commercially pure titanium powder with a Nd:YAG laser source , 2003 .
[168] Dietmar W. Hutmacher,et al. Comparison of the degradation of polycaprolactone and polycaprolactone–(β‐tricalcium phosphate) scaffolds in alkaline medium , 2007 .
[169] Guifang Gao,et al. Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells. , 2014, Biotechnology journal.
[170] B Vamsi Krishna,et al. Processing and biocompatibility evaluation of laser processed porous titanium. , 2007, Acta biomaterialia.
[171] Emanuel M. Sachs,et al. Alumina-doped silica gradient-index (GRIN) lenses by slurry-based three-dimensional printing (S-3DP™) , 2004 .
[172] S. Zinelis,et al. Metallurgical and interfacial characterization of PFM Co-Cr dental alloys fabricated via casting, milling or selective laser melting. , 2014, Dental materials : official publication of the Academy of Dental Materials.
[173] Aletta Hazeveld,et al. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques. , 2014, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.
[174] A. Bandyopadhyay,et al. MgO-doped tantalum coating on Ti: microstructural study and biocompatibility evaluation. , 2012, ACS applied materials & interfaces.
[175] Lin Lu,et al. Porogen-based solid freeform fabrication of polycaprolactone-calcium phosphate scaffolds for tissue engineering. , 2006, Biomaterials.
[176] S. Bose,et al. Calcium phosphate ceramic systems in growth factor and drug delivery for bone tissue engineering: a review. , 2012, Acta biomaterialia.
[177] A. Bandyopadhyay,et al. Doped tricalcium phosphate scaffolds by thermal decomposition of naphthalene: Mechanical properties and in vivo osteogenesis in a rabbit femur model. , 2015, Journal of biomedical materials research. Part B, Applied biomaterials.
[178] J Fisher,et al. Development of computational wear simulation of metal-on-metal hip resurfacing replacements. , 2008, Journal of biomechanics.
[179] Sandip Bysakh,et al. Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium , 2011 .
[180] Federica Chiellini,et al. Additive manufacturing of wet-spun polymeric scaffolds for bone tissue engineering , 2012, Biomedical microdevices.
[181] Linda G Griffith,et al. Osteoblast response to PLGA tissue engineering scaffolds with PEO modified surface chemistries and demonstration of patterned cell response. , 2004, Biomaterials.
[182] Swee Hin Teoh,et al. Evaluation of polycaprolactone scaffold degradation for 6 months in vitro and in vivo. , 2009, Journal of biomedical materials research. Part A.
[183] A. Bandyopadhyay,et al. Calcium Phosphate‐Based Resorbable Ceramics: Influence of MgO, ZnO, and SiO2 Dopants , 2006 .
[184] D. West,et al. Laser surface cladding of stellite and stellite-SiC composite deposits for enhanced hardness and wear , 1991 .
[185] A. Boccaccini,et al. Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass , 2015 .
[186] Atsushi Takaichi,et al. Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications. , 2013, Journal of the mechanical behavior of biomedical materials.
[187] A. Bandyopadhyay,et al. SrO- and MgO-doped microwave sintered 3D printed tricalcium phosphate scaffolds: mechanical properties and in vivo osteogenesis in a rabbit model. , 2015, Journal of biomedical materials research. Part B, Applied biomaterials.
[188] Vamsi Krishna Balla,et al. Direct laser processing of a tantalum coating on titanium for bone replacement structures. , 2010, Acta biomaterialia.
[189] O. Harrysson,et al. Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology , 2008 .
[190] D. Grijpma,et al. Preparation of designed poly(D,L-lactide)/nanosized hydroxyapatite composite structures by stereolithography. , 2013, Acta biomaterialia.
[191] Abhay S Pandit,et al. Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique. , 2008, Biomaterials.
[192] H. Oonishi,et al. Particulate Bioglass Compared With Hydroxyapatite as a Bone Graft Substitute , 1997, Clinical orthopaedics and related research.
[193] Amit Bandyopadhyay,et al. Processing of controlled porosity ceramic structures via fused deposition , 1999 .
[194] Xavier Intes,et al. The integration of 3-D cell printing and mesoscopic fluorescence molecular tomography of vascular constructs within thick hydrogel scaffolds. , 2012, Biomaterials.
[195] Melba Navarro,et al. Impact of 3-D printed PLA- and chitosan-based scaffolds on human monocyte/macrophage responses: unraveling the effect of 3-D structures on inflammation. , 2014, Acta biomaterialia.
[196] Dong-Woo Cho,et al. A comparative study on collagen type I and hyaluronic acid dependent cell behavior for osteochondral tissue bioprinting , 2014, Biofabrication.
[197] B D Boyan,et al. Role of material surfaces in regulating bone and cartilage cell response. , 1996, Biomaterials.
[198] Uwe Gbureck,et al. 3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects. , 2010, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[199] Thierry Chartier,et al. Ceramic suspensions suitable for stereolithography , 1998 .
[200] Min Zheng,et al. Microstructure and osteoblast response of gradient bioceramic coating on titanium alloy fabricated by laser cladding , 2008 .
[201] Shawn P. Moylan,et al. Measurement Science Needs for Real-time Control of Additive Manufacturing Powder Bed Fusion Processes , 2015 .
[202] F. Melchels,et al. A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.
[203] J. Suwanprateeb,et al. Mechanical and in vitro performance of apatite–wollastonite glass ceramic reinforced hydroxyapatite composite fabricated by 3D-printing , 2009, Journal of materials science. Materials in medicine.
[204] D. Cho,et al. 3D printing of composite tissue with complex shape applied to ear regeneration , 2014, Biofabrication.
[205] S. Hsu,et al. Synthesis and 3D Printing of Biodegradable Polyurethane Elastomer by a Water‐Based Process for Cartilage Tissue Engineering Applications , 2014, Advanced healthcare materials.
[206] Gianaurelio Cuniberti,et al. Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability. , 2011, Acta biomaterialia.
[207] O. Dufaud,et al. Stereolithography of PZT ceramic suspensions , 2002 .
[208] Jeffrey W Stansbury,et al. 3D printing with polymers: Challenges among expanding options and opportunities. , 2016, Dental materials : official publication of the Academy of Dental Materials.
[209] Juan Pou,et al. Bioceramic 3D Implants Produced by Laser Assisted Additive Manufacturing , 2014 .
[210] Uwe Gbureck,et al. Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices. , 2007, Journal of controlled release : official journal of the Controlled Release Society.
[211] Likai Shi,et al. Characterization of laser powder deposited Ti–TiC composites and functional gradient materials , 2008 .
[212] Shu Cao,et al. Investigation on urea-formaldehyde resin as an in-powder adhesive for the fabrication of Al2O3/borosilicate–glass composite parts by three dimensional printing (3DP) , 2015 .
[213] Paul Roschger,et al. Towards bone replacement materials from calcium phosphates via rapid prototyping and ceramic gelcasting , 2005 .
[214] Frédéric Vignat,et al. Metallic additive manufacturing: state-of-the-art review and prospects , 2012 .
[215] Changsheng Liu,et al. The effect of polymeric chain-like structure on the degradation and cellular biocompatibility of calcium polyphosphate , 2008 .
[216] Karl R Edminster,et al. Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication. , 2009, Biomaterials.
[217] Vamsi Krishna Balla,et al. Laser processing of SiC-particle-reinforced coating on titanium , 2010 .
[218] Robert Liska,et al. Processing of 45S5 Bioglass® by lithography-based additive manufacturing , 2012 .
[219] D. Cho,et al. Bioprinting of a mechanically enhanced three-dimensional dual cell-laden construct for osteochondral tissue engineering using a multi-head tissue/organ building system , 2012 .
[220] L. Murr,et al. Compression deformation behavior of Ti-6Al-4V alloy with cellular structures fabricated by electron beam melting. , 2012, Journal of the mechanical behavior of biomedical materials.
[221] Elsa Reichmanis,et al. Photopolymer Materials and Processes for Advanced Technologies , 2014 .
[222] Ning Liu,et al. Development of highly porous titanium scaffolds by selective laser melting , 2010 .
[223] Takashi Nakamura,et al. Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments. , 2011, Acta biomaterialia.
[224] Bin Duan,et al. Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering. , 2010, Acta biomaterialia.
[225] Vamsi Krishna Balla,et al. Microwave‐sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering , 2013, Journal of tissue engineering and regenerative medicine.
[226] Amit Bandyopadhyay,et al. Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling , 2003 .
[227] Peter X Ma,et al. Phase separation, pore structure, and properties of nanofibrous gelatin scaffolds. , 2009, Biomaterials.
[228] E. Toyserkani,et al. Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.
[229] Dietmar W Hutmacher,et al. Dynamics of in vitro polymer degradation of polycaprolactone-based scaffolds: accelerated versus simulated physiological conditions , 2008, Biomedical materials.
[230] James J. Yoo,et al. Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications , 2012, Biofabrication.
[231] Liu Yaxiong,et al. Preparation of chitosan-gelatin hybrid scaffolds with well-organized microstructures for hepatic tissue engineering. , 2009, Acta biomaterialia.
[232] L L Hench,et al. Gene-expression profiling of human osteoblasts following treatment with the ionic products of Bioglass 45S5 dissolution. , 2001, Journal of biomedical materials research.
[233] J O Hollinger,et al. Calvarial Bone Repair with Porous D,L-Polylactide , 1995, Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery.
[234] Stefan Lohfeld,et al. Selective laser sintering of hydroxyapatite/poly-epsilon-caprolactone scaffolds. , 2010, Acta biomaterialia.
[235] S. L. Semiatin,et al. The laser additive manufacture of Ti-6Al-4V , 2001 .
[236] A. Bandyopadhyay,et al. Additive Manufacturing of Reactive In Situ Zr Based Ultra-High Temperature Ceramic Composites , 2016 .
[237] Hsin-Yi Lin,et al. Chitosan-based hydrogel tissue scaffolds made by 3D plotting promotes osteoblast proliferation and mineralization , 2015, Biomedical materials.
[238] J. Planell,et al. High-resolution PLA-based composite scaffolds via 3-D printing technology. , 2013, Acta biomaterialia.
[239] Yong Man Ro,et al. Mass type-specific sparse representation for mass classification in computer-aided detection on mammograms , 2013, Biomedical engineering online.
[240] David W. Rosen,et al. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .
[241] Yongnian Yan,et al. Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition , 2002 .
[242] Wim E Hennink,et al. In vivo biocompatibility and biodegradation of 3D-printed porous scaffolds based on a hydroxyl-functionalized poly(ε-caprolactone). , 2012, Biomaterials.
[243] Michael C. McAlpine,et al. 3D Printed Bionic Ears , 2013, Nano letters.
[244] Ryan B. Wicker,et al. Characterization of ceramic components fabricated using binder jetting additive manufacturing technology , 2016 .
[245] T. Joyce,et al. Volumetric wear assessment of failed metal-on-metal hip resurfacing prostheses , 2011 .
[246] M. Peuckert,et al. Ceramics from organometallic polymers , 1990 .
[247] D. Cho,et al. Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres. , 2011, Biomaterials.
[248] David H. Sturgis,et al. Hydroxylated Carboxylic Acid Monomers as Stabilizing Agents for Yttria–Alumina Aqueous Suspensions , 2005 .
[249] Jean-Pierre Kruth,et al. Wear Performance of SLS/SLM Materials , 2008 .
[250] Joseph Suhan,et al. Bioprinting of Growth Factors onto Aligned Sub-micron Fibrous Scaffolds for Simultaneous Control of Cell Differentiation and Alignment , 2022 .
[251] Yongxiang Luo,et al. Hierarchical mesoporous bioactive glass/alginate composite scaffolds fabricated by three-dimensional plotting for bone tissue engineering , 2012, Biofabrication.
[252] M. Leu,et al. Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering , 2011, Biofabrication.
[253] H. Seitz,et al. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.
[254] José M.F. Ferreira,et al. A simple recipe for direct writing complex 45S5 Bioglass® 3D scaffolds , 2013 .
[255] Fabien Guillemot,et al. Cell patterning technologies for organotypic tissue fabrication. , 2011, Trends in biotechnology.
[256] S. Kurtz,et al. PEEK biomaterials in trauma, orthopedic, and spinal implants. , 2007, Biomaterials.
[257] J. Toth. Biocompatibility of Polyaryletheretherketone Polymers , 2012 .
[258] P. Vogt,et al. Tissue Engineered Skin Substitutes Created by Laser-Assisted Bioprinting Form Skin-Like Structures in the Dorsal Skin Fold Chamber in Mice , 2013, PloS one.
[259] Daniel Thomas,et al. A selective laser melted Co-Cr alloy used for the rapid manufacture of removable partial denture frameworks: Initial screening of biocompatibility , 2011 .
[260] I Zein,et al. Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.
[261] Clemens A van Blitterswijk,et al. Bone ingrowth in porous titanium implants produced by 3D fiber deposition. , 2007, Biomaterials.
[262] Rui L Reis,et al. Potential applications of natural origin polymer-based systems in soft tissue regeneration , 2010, Critical reviews in biotechnology.
[263] S. Kalita,et al. Fabrication of 3-D Porous Mg/Zn doped Tricalcium Phosphate Bone-Scaffolds via the Fused Deposition Modelling , 2006 .
[264] Xiaobing Fu,et al. Naturally derived materials-based cell and drug delivery systems in skin regeneration. , 2010, Journal of controlled release : official journal of the Controlled Release Society.
[265] Mark A. Ganter,et al. Development Process for Custom Three-Dimensional Printing (3DP) Material Systems , 2010 .
[266] Amit Bandyopadhyay,et al. Pore size and pore volume effects on alumina and TCP ceramic scaffolds , 2003 .
[267] Syed H. Masood,et al. Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling , 2011 .
[268] Vamsi Krishna Balla,et al. In vitro Wear Rate and Co Ion Release of Compositionally and Structurally Graded CoCrMo-Ti6Al4V Structures. , 2011, Materials science & engineering. C, Materials for biological applications.
[269] Jinku Kim,et al. Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model , 2012, Biofabrication.
[270] A. Bandyopadhyay,et al. Polycaprolactone coated porous tricalcium phosphate scaffolds for controlled release of protein for tissue engineering. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[271] Vamsi Krishna Balla,et al. Fabrication of compositionally and structurally graded Ti-TiO2 structures using laser engineered net shaping (LENS). , 2009, Acta biomaterialia.
[272] Clemens A van Blitterswijk,et al. Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants. , 2008, Biomaterials.