论文信息 - A voltage controller in photo-voltaic system without battery storage for Stand-Alone Applications

A voltage controller in photo-voltaic system without battery storage for Stand-Alone Applications

The paper proposes the new voltage controller in photo-voltaic system for Stand-Alone Applications without battery energy storage. The output of the PV array is unregulated DC supply due to change in weather conditions. The maximum power is tracked with respect to temperature and irradiance levels by using DC-DC converter. The perturbation and observes algorithm is applied for maximum power point tracking (MPPT) purpose. This algorithm is selected due to its ability to withstand against any parameter variation and having high efficiency. The output of DC-DC converter is converted to AC voltage by using inverter. The AC output voltage and frequency are regulated. A closed loop voltage control for inverter is done by using unipolar sine wave pulse width modulation (SPWM). The regulated AC voltage is fed to AC standalone loads or grid integration. The overall system is designed, developed and validated by using MATLAB-SIMULINK. The simulation results demonstrate the effective working of MPPT algorithm and voltage controller with SPWM technique for inverter in AC standalone load applications.

S. Moorthi | P. Raja | S. Senthil Kumar | Ganesh Dharmireddy

[1] S.A. Daniel,et al. A novel hybrid isolated generating system based on PV fed inverter-assisted wind-driven induction Generators , 2004, IEEE Transactions on Energy Conversion.

[2] V. Vorperian. Simplified analysis of PWM converters using model of PWM switch. II. Discontinuous conduction mode , 1990 .

[3] Takeyoshi Kato,et al. Evaluation of LFC capacity for output fluctuation of photovoltaic power generation systems based on multi-point observation of insolation , 2001, 2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262).

[4] Andres Barrado,et al. Review of the maximum power point tracking algorithms for stand-alone photovoltaic systems , 2006 .

[5] Henry Shu-Hung Chung,et al. A novel maximum power point tracking technique for solar panels using a SEPIC or Cuk converter , 2003 .

[6] L.A.C. Lopes,et al. An improved perturbation and observation maximum power point tracking algorithm for PV arrays , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[7] Roberto F. Coelho,et al. A simplified analysis of DC-DC converters applied as maximum power point tracker in photovoltaic systems , 2010, The 2nd International Symposium on Power Electronics for Distributed Generation Systems.