Variability of operating safety limits with catalyst within a fixed-bed catalytic reactor for vapour-phase nitrobenzene hydrogenation

The safety in operation of a fixed-bed catalytic reactor remains a sensitive issue when a highly exothermic reaction is conducted and various process development elements such as controllability, stability, risk, and economic aspects are considered. Several model-based methods are used to estimate the safe operating region limits. Nominal conditions are set to limit the hot spot in the tubular reactor and avoid excessive thermal sensitivity to variations in the process parameters. When the catalyst or its characteristics are changed, the operating conditions have to be adjusted accordingly. The safety problem becomes more important when the production optimization requires setting the nominal operating point in the vicinity of the safety limits. This paper investigates the advantages as well as the precautions that need to be taken when using a more sophisticated model-based global sensitivity criterion (MV of Morbidelli & Varma) to routinely update the runaway critical conditions when changes in the investigated system frequently occur. A concrete example is provided for the case of an industrial fixed-bed catalytic reactor for nitrobenzene hydrogenation in vapour-phase. The analysis points out the discrepancies in predicting the runaway boundaries for complex processes between precise sensitivity-based MV-method and shortcut methods, and the importance of accounting for parameter uncertainty for both evaluation of the confidence region around the runaway boundaries and for the optimal set-point location. The close connection between the operating risk limits and the process kinetics is also highlighted even if the reactor geometry and the main flow conditions are kept unchanged.

[1]  Fernanda Strozzi,et al.  A general method for assessing the thermal stability of batch chemical reactors by sensitivity calculation based on Lyapunov exponents , 1994 .

[2]  Gheorghe Maria,et al.  Relations between apparent and intrinsic kinetics of “programmable” drug release in human plasma , 2005 .

[3]  S. Whitaker.  Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles , 1972 .

[4]  Don W. Green,et al.  Perry's Chemical Engineers' Handbook , 2007 .

[5]  A. C. Dimian.  Chemical process design , 2008 .

[6]  Dan Luss,et al.  Explicit runaway criterion for catalytic reactors with transport limitations , 1991 .

[7]  Francis Stoessel,et al.  Thermal Safety of Chemical Processes: Risk Assessment and Process Design , 2008 .

[8]  L. Doraiswamy,et al.  Kinetics of Catalytic Vapor-Phase Hydrogenation of Nitrobenzene to Aniline , 1965 .

[9]  Herschel Rabitz,et al.  Parametric sensitivity of system stability in chemical dynamics , 1985 .

[10]  G. Höhne,et al.  Differential Scanning Calorimetry , 2007 .

[11]  Martin Mönnigmann,et al.  Steady-State Process Optimization with Guaranteed Robust Stability and Feasibility , 2003 .

[12]  Guntram Koller.  Identification and assessment of relevant environmental, health and safety aspects during early phases of process development , 2000 .

[13]  John H. Seinfeld,et al.  Optimization with Multiple Performance Criteria. Application to Minimization of Parameter Sensitivlties in a Refinery Model , 1970 .

[14]  Giuseppe Maschio,et al.  A general criterion to define runaway limits in chemical reactors , 2003 .

[15]  Olga V. Dorofeeva,et al.  Standard thermodynamic properties of nitrobenzene in the ideal gas state , 2008 .

[16]  Massimo Morbidelli,et al.  A generalized criterion for parametric sensitivity: Application to thermal explosion theory , 1988 .

[17]  Margarida J. Quina,et al.  Thermal Runaway Conditions of a Partially Diluted Catalytic Reactor , 1999 .

[18]  C. Bamford,et al.  Comprehensive Chemical Kinetics , 1976 .

[19]  Elmar Heinzle,et al.  Kinetic system identification by using short-cut techniques in early safety assessment of chemical processes , 1998 .

[20]  Konrad Hungerbühler,et al.  Estimation of the time to maximum rate using dynamic DSC experiments , 1997 .

[21]  Elmar Heinzle,et al.  Testing Novel Short-Cut Methods for Complex Kinetic Characterisation in Early Safety Assessment of a Chemical Process , 1999 .

[22]  D. Thoenes,et al.  Mass transfer from spheres in various regular packings to a flowing fluid , 1958 .

[23]  Pierre Trambouze,et al.  Chemical reactors: Design, engineering, operation , 1988 .

[24]  Hua Wu,et al.  Parametric sensitivity in chemical systems , 1999 .

[25]  Elias Klemm,et al.  Deactivation kinetics in the hydrogenation of nitrobenzene to aniline on the basis of a coke formation kinetics — investigations in an isothermal catalytic wall reactor , 2001 .

[26]  Konrad Hungerbühler,et al.  Assessment of chemical process hazards in early design stages , 2005 .

[27]  Konrad Hungerbühler,et al.  A Hierarchical Approach for the Evaluation of Chemical Process Aspects from the Perspective of Inherent Safety , 2003 .

[28]  Charles N. Satterfield,et al.  Mass transfer in heterogeneous catalysis , 1969 .

[29]  S. Hada,et al.  Prediction of energy release hazards using a simplified adiabatic temperature rise , 2007 .

[30]  L. Petrov,et al.  Kinetic model of nitrobenzene hydrogenation to aniline over industrial copper catalyst considering the effects of mass transfer and deactivation , 1990 .

[31]  L. T. Fan,et al.  Consideration of Sensitivity and Parameter Uncertainty in Optimal Process Design , 1970 .

[32]  Theodor Grewer.  Thermal hazards of chemical reactions , 1994 .

[33]  Gheorghe Maria,et al.  A Review of Algorithms and Trends in Kinetic Model Identification for Chemical and Biochemical Systems , 2004 .

[34]  Richard G. Compton,et al.  Kinetic models of catalytic reactions , 1991 .

[35]  Masakazu Matsubara,et al.  Optimal design of chemical processes involving parameter uncertainty , 1973 .

[36]  Ccps.  Guidelines for Chemical Process Quantitative Risk Analysis , 1999 .

[37]  Hiromu Ohno,et al.  Optimal Design of a Large Complex System from the Viewpoint of Sensitivity Analysis , 1970 .

[38]  L. Doraiswamy,et al.  Heterogeneous reactions: Analysis examples and reactor design. Vol. 1: Gas solid and solid-solid reactions , 1984 .

[39]  C. Sliepcevich,et al.  Copper Catalysts in Hydrogenating Nitro-benzene to Aniline , 1960 .

[40]  G. Froment,et al.  Chemical Reactor Analysis and Design , 1979 .

[41]  C. Y. Wen,et al.  Optimal Design of Systems Involving Parameter Uncertainty , 1968 .

[42]  E. Dieterich,et al.  Kinetic investigations of the deactivation by coking of a noble metal catalyst in the catalytic hydrogenation of nitrobenzene using a catalytic wall reactor , 1999 .

[43]  G. Emig,et al.  Kinetic investigation and reactor simulation for the catalytic gas-phase oxidation of n-butane to maleic anhydride , 1987 .

[44]  N. Mahata,et al.  Gas phase hydrogenation of phenol over supported palladium catalysts , 1999 .

[45]  Herschel Rabitz,et al.  Parametric sensitivity and self-similarity in thermal explosion theory , 1992 .

[46]  L. K. Doraiswamy,et al.  Parametric sensitivity in fixed-bed reactors☆ , 1975 .