Evaluation and limitations of standard wall functions in channel and step flow configurations

This paper reviews and investigates the implementation, evaluation and limitations of conventional wall functions, based on law of the wall, in combination with linear k   turbulence model in simple (fully developed channel) and complex (backward facing step) flow configurations. The near-wall viscosity-affected layer of a turbulent fluid flow poses a number of challenges, from both modeling and numerical viewpoints. Over this thin wall-adjacent region turbulence properties change orders of magnitude faster than over the rest of the flow. Although the law of the wall and equilibrium assumptions are not valid in the recirculation region of the separating and reattaching flows, the general flow behaviour of backward-facing step flow is not significantly altered by the particular form of the standard wall functions. The results obtained in the case of the backward facing step flow configuration suggest that the solution might be found in modification of the linear k   model and improvement of standard wall functions.

[1]  B. Launder,et al.  On the calculation of turbulent heat transport downstream from an abrupt pipe expansion , 1980 .

[2]  Suad Jakirlić,et al.  Closure Strategies for Turbulent and Transitional Flows: Second-Moment Turbulence Closure Modelling , 2002 .

[3]  R. W. Johnson,et al.  DISCUSSION OF “ON THE CALCULATION OF TURBULENT HEAT TRANSPORT DOWNSTREAM FROM AN ABRUPT PIPE EXPANSION” , 1982 .

[4]  Kemal Hanjalic,et al.  Modelling Turbulence in Engineering and the Environment: Second-Moment Routes to Closure , 2011 .

[5]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[6]  R. Kiel,et al.  Experimental and theoretical investigations of the near-wall region in a turbulent separated and reattached flow , 1995 .

[7]  D. Spalding,et al.  Heat and Mass Transfer in Boundary Layers. 2nd edition. By S. V. PATANKAR and D. B. SPALDING. Intertext Books, 1970. 255 pp. £6. , 1971, Journal of Fluid Mechanics.

[8]  Ryoichi S. Amano,et al.  Development of a turbulence near-wall model and its application to separated and reattached flows , 1984 .

[9]  Yen-Sen Chen,et al.  Computation of turbulent flows using an extended k-epsilon turbulence closure model , 1987 .

[10]  Tuan Ngo,et al.  Numerical solution of turbulent flow past a backward facing step using a nonlinear K-epsilon model , 1987 .

[11]  Application of a Generalised RANS Wall-Function, to Recirculating Flows with Heat Transfer , 2005 .

[12]  Tim Craft,et al.  Progress in the generalization of wall-function treatments , 2002 .

[13]  R. Amano,et al.  A Numerical and Experimental Investigation of Turbulent Heat Transport Downstream From an Abrupt Pipe Expansion , 1983 .

[14]  John Kim,et al.  Progress in pipe and channel flow turbulence, 1961–2011 , 2012 .

[15]  M. W. Collins,et al.  k-ε Predictions of Heat Transfer in Turbulent Recirculating Flows Using an Improved Wall Treatment , 1989 .

[16]  F. Clauser.  The Turbulent Boundary Layer , 1956 .

[17]  Ayodeji O. Demuren,et al.  Systematic Study of Reynolds Stress Closure Models in the Computations of Plane Channel Flows , 1992 .

[18]  J. Laufer,et al.  Investigation of turbulent flow in a two-dimensional channel , 1951 .

[19]  P. Moin,et al.  Computation of turbulent flows over backward-facing step , 1983 .

[20]  V. M. Borishanskiĭ,et al.  Heat transfer to molten metals during flow in pipes , 1964 .