Surface modifications of TiN coating by the pulsed TEA CO

Abstract Interaction of a transversely excited atmospheric (TEA) CO 2 and excimer-KrCl laser, pulse duration ∼2 μs (FWHM of initial spike ∼100 ns) and ∼12 ns (FWHM), respectively, with polycrystalline titanium nitride (TiN) coating deposited on high quality steels, was studied. The results have shown that the titanium nitride was surface modified by the laser beam, with an energy density (ED) of 43.0 J/cm 2 (TEA CO 2 laser system) and 3.3 J/cm 2 (KrCl system), respectively. The energy absorbed from the CO 2 laser beam is partially converted to thermal energy, which generates a series of effects such as melting, vaporization of the molten material, shock waves, etc. The energy from the excimer-KrCl laser primarily leads to a fast and intense target evaporation. Calculated maximal temperatures, on the target surface, were 3940 and 8000 K for the TEA CO 2 and the KrCl lasers, respectively. It is assumed that TEA CO 2 laser affects the target deeper, during a longer time than the KrCl laser. The effects of the KrCl laser are confined to a localized area, near target surface, in the course of short time. The following morphological changes of titanium nitride surface were observed: (i) both types of laser caused ablation of the TiN coating in the central zone of the irradiated area, (ii) appearance of a hydrodynamic feature like resolidified droplets of material in the surrounding outer zone (cracking) in the case of the TEA CO 2 laser, and (iii) appearance of wave-like microstructures (consisting of periodic parallel fringes with a period of about 20 microns) in the case of KrCl laser. Formation of the wave-like microstructures is discussed in the context of laser-induced periodic surface structure (LIPSS) effects and diffraction phenomena. The process of the CO 2 and KrCl laser interaction with titanium nitride were typically accompanied by plasma formation. Plasma appeared above the target after about 40 and 1 laser pulse, respectively.

[1]  Clark,et al.  Ultraviolet-laser-induced periodic surface structures. , 1989, Physical review. B, Condensed matter.

[2]  Anthony J. Pedraza,et al.  Surface micro-structuring of silicon by excimer-laser irradiation in reactive atmospheres , 2000 .

[3]  John E. Sipe,et al.  Laser-Induced Periodic Surface Structure on Solids: A Universal Phenomenon , 1982 .

[4]  Wolfgang Kautek,et al.  Femtosecond laser micromachining of technical materials , 2000, SPIE High-Power Laser Ablation.

[5]  M. Trtica,et al.  Transversely excited atmospheric CO2 laser-induced damage of TiN and (Ti,Al)N coatings , 1999 .

[6]  Milan S. Trtica,et al.  Efficient small-scale TEA CO2 laser for material surface modification , 2002, Atomic and Molecular Pulsed Lasers.

[7]  M. Trtica,et al.  Surface modification of stainless steels by TEA CO2 laser , 2001 .

[8]  Victor S. Skakun,et al.  Ultraviolet and infrared lasers with high efficiency , 1998, Other Conferences.

[9]  Milan S. Trtica,et al.  TEA CO2 laser-induced damage of low-thickness TiN coatings , 1999 .

[10]  C. Andreazza-Vignolle,et al.  Metal surface nitriding by laser induced plasma , 1996 .

[11]  Milan S. Trtica,et al.  Pulsed CO2 laser ablation of polished steel and titanium nitride-coated steel , 2000, Advanced High-Power Lasers and Applications.

[12]  S. Amoruso.  Modelling of laser produced plasma and time-of-flight experiments in UV laser ablation of aluminium targets , 1999 .

[13]  Viktor F Tarasenko,et al.  'Foton' series of universal pulsed lasers , 1995 .

[14]  I. Mihailescu,et al.  Multistage plasma initiation process by pulsed CO2 laser irradiation of a Ti sample in an ambient gas (He, Ar, or N2) , 1993 .

[15]  Jeff F. Young,et al.  Laser-induced periodic surface structure. I. Theory , 1983 .

[16]  Valerio Romano,et al.  Laser ablation and micropatterning of thin TiN coatings , 2000 .

[17]  Heinz Sturm,et al.  Chemical, morphological and accumulation phenomena in ultrashort-pulse laser ablation of TiN in air , 2000 .

[18]  J. Hermann,et al.  A spectroscopic study of laser ablation plasmas from Ti, Al and C targets , 1998 .

[19]  Jeff F. Young,et al.  Laser-induced periodic surface structure. II. Experiments on Ge, Si, Al, and brass , 1983 .

[20]  John E. Sipe,et al.  Laser-induced periodic surface structure. III. Fluence regimes, the role of feedback, and details of the induced topography in germanium , 1984 .

[21]  V. Craciun,et al.  Evidence for volume boiling during laser ablation of single crystalline targets , 1999 .

[22]  J. Sundgren,et al.  A review of the present state of art in hard coatings grown from the vapor phase , 1986 .