Design of a Compact Wideband Feed Cluster With Dual-Polarized Sum- and Difference-Patterns Implemented via 3-D Metal Printing

A compact wideband feed cluster with dual-polarized sum- and difference-patterns is proposed in this paper. By utilizing dual-ridged waveguide orthomode transducers (OMTs) and wideband Magic-Tees, a highly integrated feed cluster with wide operational bandwidth, dual-polarization, and good isolation is developed. The feed cluster consists of five horns with square apertures arranged in a cross. A total of five OMTs and four Magic-Tees are used to construct the necessary comparator network to achieve sum- and difference-patterns in both polarizations. All components and the interface between them are designed with the three-dimensional metal printing in mind. A prototype is fabricated and the measured results show that the isolation between the orthogonal polarizations is better than 50 dB throughout the operational bandwidth of 10.5 to 14.5 GHz. The null-depths of the difference-patterns are better than –30 dB. The proposed feed cluster is practically useful in a variety of satellite-based applications.

[1]  Samuel M. Sherman,et al.  Monopulse Principles and Techniques , 1984 .

[2]  S. J. Skinner,et al.  Wide-band orthomode transducers , 1991 .

[3]  Fan Zhang,et al.  Ku-band 200-W Pulsed Power Amplifier Based on Waveguide Spatially Power-Combining Technique for Industrial Applications , 2014, IEEE Transactions on Industrial Electronics.

[4]  Guan-Long Huang,et al.  Fabrication of a High-Efficiency Waveguide Antenna Array via Direct Metal Laser Sintering , 2016, IEEE Antennas and Wireless Propagation Letters.

[5]  Guan-Long Huang,et al.  Highly-Efficient Self-Compact Monopulse Antenna System With Integrated Comparator Network for RF Industrial Applications , 2017, IEEE Transactions on Industrial Electronics.

[6]  Shih-Kang Kuo,et al.  Design and Development of RFID Label for Steel Coil , 2010, IEEE Transactions on Industrial Electronics.

[7]  Tao Yuan,et al.  Development of a Wideband and High-Efficiency Waveguide-Based Compact Antenna Radiator With Binder-Jetting Technique , 2017, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[8]  Edward Kai-Ning Yung,et al.  A Low-Cost Printed CP Patch Antenna for RFID Smart Bookshelf in Library , 2010, IEEE Transactions on Industrial Electronics.

[9]  Vijitha Weerackody,et al.  Sensitivity of satellite interference to locations of small-aperture terminals , 2016, IEEE Transactions on Aerospace and Electronic Systems.

[10]  A. Navarrini,et al.  Symmetric Reverse-Coupling Waveguide Orthomode Transducer for the 3-mm Band , 2009, IEEE Transactions on Microwave Theory and Techniques.

[11]  Mamoru Kamikura,et al.  Development of Double-Ridged Wavegide Orthomode Transducer for the 2 MM Band , 2009 .

[12]  P. Hannan,et al.  Optimum feeds for all three modes of a monopulse antenna II: Practice , 1961 .

[13]  Wenbin Dou,et al.  W band axially displaced monopulse dual-reflector antenna for inter-satellite communications , 2016 .

[14]  Kaijun Song,et al.  Ultra-Wideband Ring-Cavity Multiple-Way Parallel Power Divider , 2013, IEEE Transactions on Industrial Electronics.

[15]  Chow-Yen-Desmond Sim,et al.  Waveguide-Stripline Series–Corporate Hybrid Feed Technique for Dual-Polarized Antenna Array Applications , 2017, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[16]  A. Navarrini,et al.  A turnstile junction waveguide orthomode transducer , 2006, IEEE Transactions on Microwave Theory and Techniques.

[17]  Shun He,et al.  Target location with signal fitting and sub-aperture tracking for airborne multi-channel radar , 2010 .

[18]  Guan-Long Huang,et al.  Physically symmetric wideband waveguide T-junction with equal-phase and unequal-power division , 2015 .

[19]  Blaise Ravelo,et al.  Characterization of the Regular Polygonal Waveguide for the RF EM Shielding Application , 2010 .

[20]  Barry G. Evans,et al.  1945–2010: 65 Years of Satellite History From Early Visions to Latest Missions , 2011, Proceedings of the IEEE.

[21]  A. M. Boifot,et al.  Simple and broadband orthomode transducer (antenna feed) , 1990 .

[22]  Martti Tiuri,et al.  Electronically Tracking Antenna System for Satellite Reception , 1970, IEEE Transactions on Aerospace and Electronic Systems.

[23]  Doug Henke,et al.  Minimizing RF Performance Spikes in a Cryogenic Orthomode Transducer (OMT) , 2014, IEEE Transactions on Microwave Theory and Techniques.

[24]  Shiuh-Jer Huang,et al.  Fuzzy logic for constant force control of end milling , 1999, IEEE Trans. Ind. Electron..

[25]  R. Tascone,et al.  Orthomode transducer for millimeter-wave correlation receivers , 2006, IEEE Transactions on Microwave Theory and Techniques.

[26]  P. D. Patel Inexpensive multi-mode satellite tracking feed antenna , 1988 .

[27]  Lotfollah Shafai,et al.  Ultrawideband monopulse antenna with application as a reflector feed , 2016 .

[28]  Chow-Yen-Desmond Sim,et al.  Lightweight Perforated Waveguide Structure Realized by 3-D Printing for RF Applications , 2017, IEEE Transactions on Antennas and Propagation.

[29]  David K Barton History of Monopulse Radar in the US , 2010, IEEE Aerospace and Electronic Systems Magazine.

[30]  P. Hannan,et al.  Optimum feeds for all three modes of a monopulse antenna I: Theory , 1961 .

[31]  Kuo-Shen Chen,et al.  Development of a Digital-Convolution-Based Process Emulator for Three-Dimensional Microstructure Fabrication Using Electron-Beam Lithography , 2009, IEEE Transactions on Industrial Electronics.

[32]  Ligang Wu,et al.  A Structure Simple Controller for Satellite Attitude Tracking Maneuver , 2017, IEEE Transactions on Industrial Electronics.

[33]  Xiu Yin Zhang,et al.  RF Tunable Bandstop Filters With Constant Bandwidth Based on a Doublet Configuration , 2012, IEEE Transactions on Industrial Electronics.

[34]  Marco Alexandre Cravo Gomes,et al.  Magnitude modulation for VSAT's low back-off transmission , 2010, Journal of Communications and Networks.

[35]  L. Accatino,et al.  CAD and optimization of compact ortho-mode transducers , 1999, IMS 1999.

[36]  Edward J. Wollack,et al.  THE BØIFOT ORTHOMODE JUNCTION , 2002 .