Alumina-Precursor Nanoparticles Prepared by Partial Hydrolysis of AlCl3 Vapor in Tubular Flow Reactor: Effect of Hydrolysis Conditions on Particle Size Distribution

Aluminum chloride (AlCl3) was evaporated and partially hydrolyzed in water vapor at 300–700 °C in a tubular reactor, 2.4 cm in diameter and 50 cm in length, to form alumina-precursor particles that were more spherical and less agglomerated compared with the fumed alumina produced by flame hydrolysis and oxidation. This study was focused on the effects of the H2O to AlCl3 molar ratio, the reactor temperature, the AlCl3 concentration, and the contact point of AlCl3 with H2O vapors on the morphology, size, and chemical composition of the obtained particles. The primary particle size ranged from 50 to 200 nm depending upon the operating conditions. The particle size increased with increasing AlCl3 concentration but decreased with increasing reactor temperature or with increasing molar ratio of H2O to AlCl3. The particle size became smaller and the particle size distribution narrower as the contact point of AlCl3 with H2O vapors was moved from the inlet of the reactor to a point 10 cm inward toward the center ...

[1]  I. Melián-Cabrera,et al.  Condensation-Enhanced Self-Assembly as a Route to High Surface Area α‑Aluminas , 2013 .

[2]  W. Suchanek,et al.  Hydrothermal synthesis of novel alpha alumina nano-materials with controlled morphologies and high thermal stabilities , 2010 .

[3]  M. Martín,et al.  Nanostructured alumina particles synthesized by the Spray Pyrolysis method: microstructural and morphological analyses , 2010 .

[4]  W. Suchanek.  Hydrothermal Synthesis of Alpha Alumina (α‐Al2O3) Powders: Study of the Processing Variables and Growth Mechanisms , 2010 .

[5]  S. Cho,et al.  Preparation of α-alumina nanoparticles via vapor-phase hydrolysis of AlCl3 , 2009 .

[6]  J. Torralba,et al.  Microstructural and morphological analysis of nanostructured alumina particles synthesized at low temperature via aerosol route , 2008 .

[7]  Yanjie Hu,et al.  Preparation and Formation Mechanism of Alumina Hollow Nanospheres via High-Speed Jet Flame Combustion , 2007 .

[8]  X. Zhao,et al.  Novel synthesis of Al2O3 nano-particles by flame spray pyrolysis , 2006 .

[9]  Pei Wang,et al.  Efficient Preparation of Submicrometer α‐Alumina Powders by Calcining Carbon‐Covered Alumina , 2006 .

[10]  Jiangxu Li,et al.  Low temperature synthesis of ultrafine α-Al2O3 powder by a simple aqueous sol–gel process , 2006 .

[11]  Chowdhury G. Moniruzzaman,et al.  A discrete-sectional model for particle growth in aerosol reactor: Application to titania particles , 2006 .

[12]  R. Tannenbaum,et al.  Size-controlled synthesis of alumina nanoparticles from aluminum alkoxides , 2005 .

[13]  O. Schrems,et al.  Theoretical Study of the Reaction Mechanism and Role of Water Clusters in the Gas-Phase Hydrolysis of SiCl4 , 2003 .

[14]  S. Pratsinis,et al.  Effect of reaction temperature on CVD-made TiO2 primary particle diameter , 2003 .

[15]  S. Friedlander,et al.  Nanoparticle Microreactor: Application to Synthesis Of Titania by Thermal Decomposition of Titanium Tetraisopropoxide , 2001 .

[16]  H. Jang.  Effects of H2O on the particle size in the vapor‐phase synthesis of TiO2 , 1997 .

[17]  S. Roy,et al.  Preparation and characterisation of boehmite precursor and sinterable alumina powder from aqueous aluminium chloride-urea reaction , 1996 .

[18]  J. Groza,et al.  Nanoparticulate materials densification , 1996 .

[19]  H. Jang,et al.  The Effects of Temperature on Particle Size in the Gas-Phase Production of TiO2 , 1995 .

[20]  Sotiris E. Pratsinis,et al.  Competition between TiCl4 hydrolysis and oxidation and its effect on product TiO2 powder , 1994 .

[21]  M. Mayo,et al.  Processing nanocrystalline ceramics for applications in superplasticity , 1993 .

[22]  S. Pratsinis,et al.  Formation of agglomerate particles by coagulation and sintering—Part I. A two-dimensional solution of the population balance equation , 1991 .

[23]  Sotiris E. Pratsinis,et al.  A discrete-sectional model for particulate production by gas-phase chemical reaction and aerosol coagulation in the free-molecular regime , 1990 .

[24]  J. Seinfeld,et al.  Production of ultrafine metal oxide aerosol particles by thermal decomposition of metal alkoxide vapors , 1986 .

[25]  S. C. Graham,et al.  A comparison of numerical solutions to the self-preserving size distribution for aerosol coagulation in the free-molecule regime , 1976 .

[26]  G. D. Ulrich,et al.  Theory of Particle Formation and Growth in Oxide Synthesis Flames , 1971 .