Automatic statistical volume element modeling based on the unified topology model
暂无分享,去创建一个
Jean-Christophe Cuillière | Philippe Pilvin | Adrien Couture | Vincent François | P. Pilvin | J. Cuillière | V. François | A. Couture
[1] Christophe Geuzaine,et al. Robust untangling of curvilinear meshes , 2013, J. Comput. Phys..
[2] A. A. Gusev. Representative volume element size for elastic composites: A numerical study , 1997 .
[3] Jean-Christophe Cuillière. A direct method for the automatic discretization of 3D parametric curves , 1997, Comput. Aided Des..
[4] Assimina A. Pelegri,et al. Numerical generation of a random chopped fiber composite RVE and its elastic properties , 2008 .
[5] Qiang Liu,et al. 3D numerical simulation for the elastic properties of random fiber composites with a wide range of fiber aspect ratios , 2014 .
[6] Anthony Gravouil,et al. Fatigue crack propagation: In situ visualization using X-ray microtomography and 3D simulation using the extended finite element method , 2006 .
[7] Martin Lévesque,et al. Random generation of periodic hard ellipsoids based on molecular dynamics: A computationally-efficient algorithm , 2013, J. Comput. Phys..
[8] Harm Askes,et al. Representative volume: Existence and size determination , 2007 .
[9] Generation of the representative volume elements of composite materials with misaligned inclusions , 2018, Composite Structures.
[10] Jean-Christophe Cuillière,et al. A new approach to automatic and a priori mesh adaptation around circular holes for finite element analysis , 2016, Comput. Aided Des..
[11] Y. Zheng,et al. Automated modeling of random inclusion composites , 2012, Engineering with Computers.
[12] Ming Huang,et al. X-ray tomography image-based reconstruction of microstructural finite element mesh models for heterogeneous materials , 2013 .
[13] Jean-Christophe Cuillière,et al. Integration of CAD, FEA and Topology Optimization through a Unified Topological Model , 2014 .
[14] W. Voigt. Ueber die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper , 1889 .
[15] Reinaldo Rodríguez-Ramos,et al. Computational evaluation of effective material properties of composites reinforced by randomly distributed spherical particles , 2007 .
[16] L. Gu,et al. Prediction of the thermomechanical behavior of particle-reinforced metal matrix composites , 2013 .
[17] Assimina A. Pelegri,et al. Analysis of 3D random chopped fiber reinforced composites using FEM and random sequential adsorption , 2008 .
[18] Aki Kallonen,et al. Analysis of short fibres orientation in steel fibre-reinforced concrete (SFRC) by X-ray tomography , 2013, Journal of Materials Science.
[19] T. Kanit,et al. Effect of reinforcement shape on physical properties and representative volume element of particles-reinforced composites: Statistical and numerical approaches , 2015 .
[20] Javier Segurado,et al. A numerical approximation to the elastic properties of sphere-reinforced composites , 2002 .
[21] John M. Boone,et al. Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures , 2012 .
[22] A. Reuss,et al. Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle . , 1929 .
[23] Nikhilesh Chawla,et al. Effect of particle orientation anisotropy on the tensile behavior of metal matrix composites: experiments and microstructure-based simulation , 2005 .
[24] M. Ostoja-Starzewski,et al. On the Size of RVE in Finite Elasticity of Random Composites , 2006 .
[25] Laurent Delannay,et al. Homogenization of elasto-plastic composites coupled with a nonlinear finite element analysis of the equivalent inclusion problem , 2010 .
[26] Ulrich Gabbert,et al. Numerical evaluation of effective material properties of randomly distributed short cylindrical fibre composites , 2007 .
[27] Jean-Christophe Cuillière,et al. Automatic construction of structural CAD models from 3D topology optimization , 2017 .
[28] Dominique Jeulin,et al. Towards gigantic RVE sizes for 3D stochastic fibrous networks , 2014 .
[29] Helmut J. Böhm,et al. Effects of particle shape on the macroscopic and microscopic linear behaviors of particle reinforced composites , 2012 .
[30] Javier Segurado,et al. Computational micromechanics of composites: The effect of particle spatial distribution , 2006 .
[31] Steven J. Owen,et al. Hexahedral Mesh Generation for Computational Materials Modeling , 2017 .
[32] Martin Lévesque,et al. A fully automated numerical tool for a comprehensive validation of homogenization models and its application to spherical particles reinforced composites , 2012 .
[33] Jean-Christophe Cuillière,et al. “What-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads , 2018, The International Journal of Advanced Manufacturing Technology.
[34] Chao Zhang,et al. Micromechanical Modeling of Fiber-Reinforced Composites with Statistically Equivalent Random Fiber Distribution , 2016, Materials.
[35] J. Montesano,et al. A new approach to rapidly generate random periodic representative volume elements for microstructural assessment of high volume fraction composites , 2018, Materials & Design.
[36] P. George,et al. Mesh Generation: Application to Finite Elements , 2007 .
[37] S. Shtrikman,et al. A variational approach to the theory of the elastic behaviour of multiphase materials , 1963 .
[38] Konrad Schneider,et al. Automatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion composites , 2016, Adv. Eng. Softw..
[39] Wenlong Tian,et al. Representative volume element for composites reinforced by spatially randomly distributed discontinuous fibers and its applications , 2015 .
[40] Shuguang Li,et al. Representative volume elements for discontinuous carbon fibre composites – Part 2: Determining the critical size , 2012 .
[41] Jean-Christophe Cuillière. An adaptive method for the automatic triangulation of 3D parametric surfaces , 1998, Comput. Aided Des..
[42] D. Jeulin,et al. Determination of the size of the representative volume element for random composites: statistical and numerical approach , 2003 .
[43] Javier Segurado,et al. A numerical investigation of the effect of particle clustering on the mechanical properties of composites , 2003 .
[44] H. Böhm,et al. Effects of particle shape on the thermoelastoplastic behavior of particle reinforced composites , 2016 .
[45] Helmut J. Böhm,et al. Multi-inclusion unit cell models for metal matrix composites with randomly oriented discontinuous reinforcements , 2002 .
[46] Suresh G. Advani,et al. The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites , 1987 .
[47] David Moxey,et al. Curvilinear mesh generation using a variational framework , 2017, Comput. Aided Des..