Composite alloying effects of V and Zr on the microstructures and properties of multi-elemental Nb–Si based ultrahigh temperature alloys

[1]  R. Ma,et al.  Effects of V addition on the microstructure and properties of multi-elemental Nb–Si based ultrahigh temperature alloys , 2020 .

[2]  Ye Tang,et al.  Role of deformation temperature and strain rate on microstructural evolution of hot compressed Nb–Si based ultrahigh temperature alloy , 2020 .

[3]  Xin Lin,et al.  Zirconium modified Nb-22Ti-16Si alloys fabricated by laser additive manufacturing: Microstructure and fracture toughness , 2019, Journal of Alloys and Compounds.

[4]  Phanikumar Gandham,et al.  Effect of Zr addition on the mechanical properties of Nb Si based alloys , 2019, Materials Science and Engineering: A.

[5]  Ye Tang,et al.  Flow softening behavior during hot compression of a Nb-Si based ultrahigh temperature alloy , 2018 .

[6]  Yan-qiang Qiao,et al.  Study of the effects of Zr addition on the microstructure and properties of Nb-Ti-Si based ultrahigh temperature alloys , 2017 .

[7]  Yueling Guo,et al.  Simultaneous improvement in fracture toughness and oxidation resistance of Nb-Si based alloys by vanadium addition , 2017 .

[8]  Zhangqi Chen,et al.  Effect of Ti and Al Interaction on Microstructures and Mechanical Properties of the Nb-Ti-Si-Al Alloys , 2016 .

[9]  Ye Tang,et al.  High temperature deformation behavior of an optimized Nb–Si based ultrahigh temperature alloy , 2016 .

[10]  Song Zhang,et al.  Alloying effects on the microstructure and properties of Nb–Si based ultrahigh temperature alloys , 2016 .

[11]  Song Zhang,et al.  Microstructure, mechanical properties and oxidation resistance of Nb silicide based ultrahigh temperature alloys with Hf addition , 2015 .

[12]  X. Hou,et al.  Isothermal oxidation mechanism of Nb–Ti–V–Al–Zr alloy at 700–1200 °C: Diffusion and interface reaction , 2015 .

[13]  B. Guo,et al.  Effect of B and Ti on the directionally solidified microstructure of the Nb–Si alloys , 2015 .

[14]  Song Zhang,et al.  Effects of Cr and Hf additions on the microstructure and properties of Nb silicide based ultrahigh temperature alloys , 2015 .

[15]  M. Heilmaier,et al.  Influence of Vanadium on the Oxidation Resistance of the Intermetallic Phase Nb5Si3 , 2015, Oxidation of Metals.

[16]  Q. Huang,et al.  Microstructure and mechanical properties of Nb–Ti–Si–Al–Hf–xCr–yV multi-element in situ composite , 2012 .

[17]  Shusuo Li,et al.  Effect of Zr and Mg on microstructure and fracture toughness of Nb-Si based alloys , 2011 .

[18]  C. Colinet,et al.  Structural stability of intermetallic phases in the Si–Ti system. Point defects and chemical potentials in D88-Si3Ti5 phase , 2010 .

[19]  Lanzhang Zhou,et al.  Microstructures and mechanical properties of cast Nb-Ti-Si-Zr alloys , 2008 .

[20]  Ying Yang,et al.  Application of phase diagram calculations to development of new ultra-high temperature structural materials , 2007 .

[21]  B. Bewlay,et al.  Thermodynamic modeling of the Hf–Ti–Si ternary system , 2007 .

[22]  Won-Yong Kim,et al.  Effect of V addition on microstructure and mechanical property in the Nb–Si alloy system , 2004 .

[23]  B. Bewlay,et al.  A review of very-high-temperature Nb-silicide-based composites , 2003 .

[24]  J. Lewandowski,et al.  Ultrahigh-Temperature Nb-Silicide-Based Composites , 2003 .

[25]  Won-Yong Kim,et al.  Microstructure and room temperature fracture toughness of Nbss/Nb5Si3 in situ composites , 2001 .

[26]  T. Mitchell,et al.  Solid solution hardening and softening in MoSi2 alloys , 2001 .

[27]  R. Tanaka.  Research and development of ultra-high temperature materials in Japan , 2000 .

[28]  K. Ho,et al.  Theoretical calculations and experimental measurements of the structure of Ti5Si3 with interstitial additions , 2000 .

[29]  B. Bewlay,et al.  Processing high-temperature refractory-metal silicide in-situ composites , 1999 .

[30]  B. Bewlay,et al.  Refractory metal-intermetallic in-situ composites for aircraft engines , 1997 .

[31]  B. Bewlay,et al.  The balance of mechanical and environmental properties of a multielement niobium-niobium silicide-basedIn Situ composite , 1996 .

[32]  A. Deruyttere,et al.  Multi-component intrinsic solid solution softening and hardening , 1977 .

[33]  T. Mitchell,et al.  Solid solution softening and hardening , 1973 .

[34]  M. Meshii,et al.  Solid solution softening and solid solution hardening , 1973 .

[35]  X. Hou,et al.  Isothermal oxidation mechanism of a newly developed Nb–Ti–V–Cr–Al–W–Mo–Hf alloy at 800–1200 °C , 2016 .

[36]  Jinxia,et al.  Effects of V and Al on Microstructure and Room Temperature Fracture Toughness of Nb-Si In-situ Composites , 2009 .

[37]  Y. Murata,et al.  Solid solution softening and hardening in alloyed MoSi2 , 1998 .