Inkjet printed WLAN antenna for an application in smartphones

The research is focused on the development of a customized inkjet printed WLAN antenna for the application, e.g., in smartphones. Therefore a new three dimensional antenna for communication devices was designed. This antenna is facing requirements such as high functionality (high communication quality) by being manufactured in a cost efficient digital printing process (inkjet printing). In order to manufacture such an antenna, the processes of contactless inkjet printing, thermal sintering and substrate folding need to be applied-always in direct relation to the antenna performance (antenna parameter). The three dimensional shape of the antenna allows an optimized antenna performance and a decreased antenna size. For the development of printed three dimensional WLAN antennas, we are focusing on advanced antenna design engineering, antenna parameter simulation (to speed up the development process), inkjet printing on flexible polymer substrates and antenna parameter measurements for validation. Our research results proof the suitability of printing as a beneficial manufacturing method for highly integrated smartphone antennas. We could also show the dependency of inkjet printing parameters (such as drop space) and the antenna performance afterwards.

[1]  Kee-Hyun Shin,et al.  An approach for controlling printed line-width in high resolution roll-to-roll gravure printing , 2013 .

[2]  Reinhard R. Baumann,et al.  Roll-to-Roll Screen Printed Radio Frequency Identification Transponder Antennas for Vehicle Tracking Systems , 2013 .

[3]  B-O Choi,et al.  Manufacturing ultra-high-frequency radio frequency identification tag antennas by multilayer printings , 2010 .

[4]  Christian Waldschmidt,et al.  Complete RF system model for analysis of compact MIMO arrays , 2004, IEEE Transactions on Vehicular Technology.

[5]  Reinhard R. Baumann,et al.  Customized printed batteries driving sensor applications , 2013, 2013 International Semiconductor Conference Dresden - Grenoble (ISCDG).

[6]  E. Y. Lam,et al.  Mobile-Phone Antenna Design , 2012, IEEE Antennas and Propagation Magazine.

[7]  C. Grigoropoulos,et al.  All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles , 2007 .

[8]  G. Sumanasekera,et al.  Solution phase synthesis and intense pulsed light sintering and reduction of a copper oxide ink with an encapsulating nickel oxide barrier , 2015, Nanotechnology.

[9]  Enrico Sowade,et al.  In‐Flight Inkjet Self‐Assembly of Spherical Nanoparticle Aggregates , 2012 .

[10]  V. Subramanian,et al.  Scaling and Optimization of Gravure-Printed Silver Nanoparticle Lines for Printed Electronics , 2010, IEEE Transactions on Components and Packaging Technologies.

[11]  Ralf Zichner,et al.  Printed antennas: from theory to praxis, challenges and applications , 2013 .

[12]  Markus Hösel,et al.  Large-scale roll-to-roll photonic sintering of flexo printed silver nanoparticle electrodes , 2012 .

[13]  Bohdan K. Kotlyarchuk,et al.  Low-energy pulsed laser treatment of silver nanoparticles for interconnects fabrication by ink-jet method , 2011 .

[14]  R.J. Langley,et al.  Quad-Band Internal Mobile Phone Antenna , 2007, IEEE Transactions on Antennas and Propagation.

[15]  Mikkel Jørgensen,et al.  Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods. , 2011, ACS nano.

[16]  H. Thomas Hahn,et al.  Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics , 2011 .

[17]  Ralf Zichner,et al.  3-D transponder antennas for future SHF RFID applications , 2011 .

[18]  Ulrich S Schubert,et al.  Microwave Flash Sintering of Inkjet‐Printed Silver Tracks on Polymer Substrates , 2009, Advanced materials.

[19]  Jinsoo Noh,et al.  Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz , 2012, Nanotechnology.

[20]  Mikkel Jørgensen,et al.  Comparison of UV‐Curing, Hotmelt, and Pressure Sensitive Adhesive as Roll‐to‐Roll Encapsulation Methods for Polymer Solar Cells , 2013 .

[21]  Tomi Mattila,et al.  Modelling of nanoparticle sintering under electrical boundary conditions , 2010 .