Engine oil acidity detection using solid state ion selective electrodes

Initial results from oil acidity measurements using thick film electrodes are presented. The results suggest that as the oil degrades, its pH/acidity follows a specific trend. Furthermore, an investigation into the feasibility of detecting changes in oil acidity (i.e. TAN value) using ion selective electrodes fabricated utilising thick film technology is presented. The thick-film (screen printing) technique is a decent means for the mass production of rugged, compact and disposable sensors as many such devices can be printed at the same time making them very cost effective to manufacture. Thick-Film ion selective and reference electrodes were fabricated, calibrated and tested in different oil samples varying its acidity. Ruthenium oxide (RuO2) pH sensitive electrodes were screen printed and were used against silver/silver chloride (Ag/AgCl) reference electrodes as well as a commercial glass Ag/AgCl reference electrode. The potentiometric sets of electrodes were calibrated in pH 4, 7 and 10 buffers in a cyclic manner and the voltage was recorded using a high input impedance voltmeter

[1]  L. Matsiev,et al.  Application of flexural mechanical resonators to simultaneous measurements of liquid density and viscosity , 1999, 1999 IEEE Ultrasonics Symposium. Proceedings. International Symposium (Cat. No.99CH37027).

[2]  J. Atkinson,et al.  Screen printed thick film subterranean and subaqueous environmental chemical sensor arrays , 2011, 2011 IEEE 13th Electronics Packaging Technology Conference.

[3]  John Atkinson,et al.  Thick film silver-silver chloride reference electrodes , 1998 .

[4]  Bruno Morten,et al.  The state of the art in thick-film sensors , 1992 .

[5]  Matteo Ferroni,et al.  Gas sensing through thick film technology , 2002 .

[6]  Agner Fog,et al.  Electronic semiconducting oxides as pH sensors , 1984 .

[7]  M. Sophocleous,et al.  An investigation into the effect of fabrication parameter variation on the characteristics of screen‐printed thick‐film silver/silver chloride reference electrodes , 2011 .

[8]  Robert Koncki,et al.  Screen-printed reference electrodes for potentiometric measurements , 2004 .

[9]  Vadim F. Lvovich,et al.  Electrochemical monitoring of water–surfactant interactions in industrial lubricants , 2002 .

[10]  Franz L. Dickert,et al.  Sol–Gel‐Coated Quartz Crystal Microbalances for Monitoring Automotive Oil Degradation , 2001 .

[11]  G. Voigt,et al.  Quality control of automotive engine oils with mass-sensitive chemical sensors – QCMs and molecularly imprinted polymers , 2000, Fresenius' journal of analytical chemistry.

[12]  M. Sophocleous,et al.  Performance of miniaturised thick-film solid state pH sensors , 2012 .

[13]  Winfried Vonau,et al.  Recent developments in electrochemical sensor application and technology—a review , 2009 .

[14]  Ryan J. Clark,et al.  Assessment of the Properties of Internal Combustion Engine Lubricants Using an Onboard Sensor , 2012 .

[15]  W. M. Needelman,et al.  Review of Lubricant Contamination and Diesel Engine Wear , 1988 .

[16]  Morton L. Topfer,et al.  Thick-Film Microelectronics: Fabrication, Design and Applications , 1971 .

[17]  John Atkinson,et al.  Planar thick-film pH electrodes based on ruthenium dioxide hydrate , 1998 .

[18]  Peter A. Lieberzeit,et al.  Borderline applications of QCM-devices: synthetic antibodies for analytes in both nm- and μm-dimensions , 2003 .

[19]  Thomas Gürtler,et al.  EXTENDED OIL DRAIN INTERVALS: CONSERVATION OF RESOURCES OR REDUCTION OF ENGINE LIFE (PART II) , 1995 .

[20]  Neil M. White,et al.  Sensor applications of thick-film technology , 1988, INFOCOM 1988.

[21]  M. Fox,et al.  Chemistry and Technology of Lubricants , 1992 .

[22]  P. Holmes,et al.  Handbook of thick film technology , 1976 .

[23]  R. Price,et al.  Chemical sensing of amine antioxidants in turbine lubricants , 1991 .

[24]  Javier Muñoz,et al.  Chemical sensors, biosensors and thick-film technology , 1995 .

[25]  C. V. King,et al.  Reference Electrodes: Theory and Practice , 1961 .

[26]  B. Jakoby,et al.  An IR-absorption sensor system for the determination of engine oil deterioration [automotive applications] , 2004, Proceedings of IEEE Sensors, 2004..

[27]  Eduardo Garcia-Breijo,et al.  A multisensor in thick-film technology for water quality control , 2005 .

[28]  Vadim F. Lvovich,et al.  Iridium oxide sensors for acidity and basicity detection in industrial lubricants , 2003 .