Visual experimental study on residence time of particle in plate rotary heat exchanger

[1]  A. Mujumdar.  Handbook of Industrial Drying , 2020 .

[2]  Katarina Åberg,et al.  Effects of temperature and residence time on continuous torrefaction of spruce wood , 2015 .

[3]  Laurédan Le Guen,et al.  A coupled thermal-granular model in flights rotary kiln: Industrial validation and process design , 2015 .

[4]  O. Ajayi,et al.  Pseudophysical Compartment Modeling of an Industrial Rotary Dryer with Flighted and Unflighted Sections: Solids Transport , 2014 .

[5]  Talal Yusaf,et al.  Particles motion in a cascading rotary drum dryer , 2014 .

[6]  Jochen Mellmann,et al.  Influence of flight design on the particle distribution of a flighted rotating drum , 2013 .

[7]  Madoc Sheehan,et al.  Design loading of free flowing and cohesive solids in flighted rotary dryers , 2012 .

[8]  Jules Thibault,et al.  Modeling the Mean Residence Time in a Rotary Dryer for Various Types of Solids , 2010 .

[9]  Madoc Sheehan,et al.  Development of a geometric flight unloading model for flighted rotary dryers , 2010 .

[10]  Wen Zhong Chen,et al.  Residence time and mass flow rate of particles in carbon rotary kilns , 2009 .

[11]  Dennis R. Van Puyvelde,et al.  Modelling the hold up of lifters in rotary dryers , 2009 .

[12]  E. Bruce Nauman,et al.  Residence Time Theory , 2008 .

[13]  Madoc Sheehan,et al.  A physical description of solids transport in flighted rotary dryers , 2006 .

[14]  Fernando J. Muzzio,et al.  Quantitative characterization of mixing processes in rotary calciners , 2002 .

[15]  Rolando E. Vega,et al.  DIMENSIONLESS CORRELATION FOR THE HEAT TRANSFER COEFFICIENT IN A BATCH-INDIRECT ROTARY DRIER , 2000 .

[16]  C. Shene,et al.  Mathematical modelling of indirect contact rotary dryers , 1998 .

[17]  Amit Chatterjee,et al.  Flow of materials in rotary kilns used for sponge iron manufacture: Part I. Effect of some operational variables , 1983 .

[18]  Amit Chatterjee,et al.  Flow of materials in rotary kilns used for sponge iron manufacture: Part II. Effect of kiln geometry , 1983 .

[19]  Marie Debacq,et al.  Effect of lifter shape and operating parameters on the flow of materials in a pilot rotary kiln: Part I. Experimental RTD and axial dispersion study , 2015 .

[20]  Gao Tian-tian.  Experimental Study on Residence Time of Solids in Carbon Rotary Kilns , 2009 .

[21]  Ma Xiao-qian,et al.  A Study of the Transmission Model of Materials in Rotary Kilns Based on a Multi-layer BP Neural Network , 2006 .

[22]  Pedro I. Alvarez,et al.  EXPERIMENTAL STUDY OF RESIDENCE TIME IN A DIRECT ROTARY DRYER , 1994 .