Development of 3D printable formulations containing CNT with enhanced electrical properties

Abstract This study demonstrates the feasibility of printing 3D composite objects based on acrylic photocurable formulations containing CNTs, by using an unmodified commercial DLP-printer. In the preliminary investigations, the most suitable formulation was developed. Viscosity and dispersion stability were adjusted by the addition of a reactive diluent to the acrylic formulation. FT-IR analyses in real time and photorheology tests allowed finding the best composition and printing parameters. Printing conditions were adjusted to get 3D structures from formulations with a content up to 0.3 wt % of CNTs. The presence of the filler causes a decrease of the crosslinking density, which could be overcome using higher intensity light sources. Electrical conductivity measurements performed on the printed samples give promising results for the use of the developed formulation for the building of 3D structures with electrical properties.

[1]  Jeffrey W Stansbury,et al.  3D printing with polymers: Challenges among expanding options and opportunities. , 2016, Dental materials : official publication of the Academy of Dental Materials.

[2]  J. Fouassier,et al.  Radiation curing in polymer science and technology , 1993 .

[3]  Sulin Zhang,et al.  Radial Corrugations of Multi-Walled Carbon Nanotubes Driven by Inter-Wall Nonbonding Interactions , 2010, Nanoscale research letters.

[4]  M. Strano,et al.  Semiconducting Single‐Walled Carbon Nanotubes as Radical Photoinitiators , 2011 .

[5]  D. Grijpma,et al.  Preparation of designed poly(D,L-lactide)/nanosized hydroxyapatite composite structures by stereolithography. , 2013, Acta biomaterialia.

[6]  S. Kirihara.  Additive manufacturing of ceramic components using laser scanning stereolithography , 2016, Welding in the World.

[7]  Flaviana Calignano,et al.  3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles , 2016, Advanced materials.

[8]  A. Morales,et al.  Electrical percolation, morphological and dispersion properties of MWCNT/PMMA nanocomposites , 2014 .

[9]  Qing Gao,et al.  Research on the printability of hydrogels in 3D bioprinting , 2016, Scientific Reports.

[10]  L. Robeson,et al.  Polymer nanotechnology: Nanocomposites , 2008 .

[11]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[12]  Houjun Sun,et al.  Additive manufacturing of carbon nanotube-photopolymer composite radar absorbing materials , 2018 .

[13]  C. E. Corcione,et al.  Organically modified montmorillonite polymer nanocomposites for stereolithography building process , 2015 .

[14]  Martine Dubé,et al.  Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications , 2016, Advanced materials.

[15]  Ryan B. Wicker,et al.  Functionalizing stereolithography resins: effects of dispersed multi‐walled carbon nanotubes on physical properties , 2006 .

[16]  J. Zou,et al.  Dispersion of carbon nanotubes and polymer nanocomposite fabrication using trifluoroacetic acid as a co-solvent , 2007 .

[17]  Lixin Wu,et al.  Structure-property relationship of nano enhanced stereolithography resin for desktop SLA 3D printer , 2016 .

[18]  Nicola McCarthy.  Regulatory RNA: Layer by layer , 2011, Nature Reviews Genetics.

[19]  A. Ganguli,et al.  Enhanced functionalization of Mn2O3@SiO2 core-shell nanostructures , 2011, Nanoscale research letters.

[20]  F. Calignano,et al.  3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol-Gel Technique. , 2016, ACS applied materials & interfaces.

[21]  M. Messori,et al.  Use of Single‐Walled Carbon Nanotubes as Reinforcing Fillers in UV‐Curable Epoxy Systems , 2008 .

[22]  Y. Yongjian,et al.  Liver and heart toxicity due to 90-day oral exposure of ICR mice to N,N-dimethylformamide. , 2011, Environmental toxicology and pharmacology.

[23]  Joshua M. Pearce,et al.  3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development , 2010, Journal of Sustainable Development.

[24]  D. Grijpma,et al.  Fabrication of patient specific composite orbital floor implants by stereolithography , 2015 .

[25]  Wolfgang Bauhofer,et al.  A review and analysis of electrical percolation in carbon nanotube polymer composites , 2009 .

[26]  W. Whittow,et al.  Printability of elastomer latex for additive manufacturing or 3D printing , 2016 .

[27]  M. Sangermano,et al.  Cationic UV‐Curing: Technology and Applications , 2014 .

[28]  Brett Paull,et al.  Recent developments in 3D printable composite materials , 2016 .

[29]  Simon Gaisford,et al.  3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems. , 2016, Journal of controlled release : official journal of the Controlled Release Society.

[30]  P. Moldenaers,et al.  Assessing the strengths and weaknesses of various types of pre-treatments of carbon nanotubes on the properties of polymer/carbon nanotubes composites: A critical review , 2010 .

[31]  G. Griffini,et al.  3D-printable CFR polymer composites with dual-cure sequential IPNs , 2016 .

[32]  Elsa Reichmanis,et al.  Photopolymer Materials and Processes for Advanced Technologies , 2014 .

[33]  R. Verdejo,et al.  Cationic photocured epoxy nanocomposites filled with different carbon fillers , 2012 .

[34]  M. Sangermano,et al.  Antistatic Epoxy Coatings With Carbon Nanotubes Obtained by Cationic Photopolymerization , 2008 .

[35]  Ryan B. Wicker,et al.  Nanotailoring photocrosslinkable epoxy resins with multi-walled carbon nanotubes for stereolithography layered manufacturing , 2007 .

[36]  K. Shakesheff,et al.  Thermoresponsive and photocrosslinkable PEGMEMA-PPGMA-EGDMA copolymers from a one-step ATRP synthesis. , 2009, Biomacromolecules.

[37]  F. Calignano,et al.  In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures , 2016, Materials.

[38]  Jean-Pierre Kruth,et al.  Composites by rapid prototyping technology , 2010 .

[39]  P. Calza,et al.  Photocatalytic Activity of Epoxy/CNT Nanocomposite Films , 2012 .

[40]  Jonas de Carvalho,et al.  Development of acrylate-based material using a multivariable approach: additive manufacturing applications , 2014 .

[41]  M. M. Cunico,et al.  Development of novel additive manufacturing technology: an investigation of a selective composite formation process , 2016 .

[42]  Marinella Levi,et al.  Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling , 2015 .

[43]  N. Hopkinson,et al.  Effect of section thickness on fatigue performance of laser sintered nylon 12 , 2016 .

[44]  Konrad Wegener,et al.  Additive Manufacturing: Polymers applicable for laser sintering (LS) , 2016 .

[45]  Hod Lipson,et al.  3-D Printing the History of Mechanisms , 2005 .

[46]  Marco Paleari,et al.  Multilayer UV-cured organic capacitors , 2015 .

[47]  Qixing Zhou,et al.  Joint action and lethal levels of toluene, ethylbenzene, and xylene on midge (Chironomus plumosus) larvae , 2013, Environmental Science and Pollution Research.

[48]  D. Therriault,et al.  3D printing of a multifunctional nanocomposite helical liquid sensor. , 2015, Nanoscale.