Liquid water quantification in the cathode side gas channels of a proton exchange membrane fuel cell through two-phase flow visualization

Abstract Water management is crucial to the performance of PEM fuel cells. Water is generated as part of the electrochemical reaction, and is removed through the reactant channels. This results in two-phase flow in the reactant channels. Increased understanding of the behavior of the liquid water in the channels allows us to devise better strategies for managing the water content inside the fuel cell. Most previous work has been focused on qualitative information regarding flow pattern maps. The current work presents new algorithms developed in MATLAB® to quantify the liquid water and to identify the flow patterns in the cathode side reactant channels. Parallel channels with dimensions matching those of commercial stacks have been used in this study. The liquid water present in the reactant channels is quantified for different temperature, inlet RH and current density conditions, and the results are presented in terms of area coverage ratio. The dominant flow patterns for the different conditions have been mapped, and trends interpreted on the basis of air flow velocities and saturation conditions within the channels.

[1]  S. Kandlikar,et al.  A critical review of cooling techniques in proton exchange membrane fuel cell stacks , 2012 .

[2]  S. Kandlikar.  Microscale and Macroscale Aspects of Water Management Challenges in PEM Fuel Cells , 2008 .

[3]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[4]  Thomas A. Trabold,et al.  In situ investigation of water transport in an operating PEM fuel cell using neutron radiography: Part 1 – Experimental method and serpentine flow field results , 2006 .

[5]  D. Jacobson,et al.  Two-phase flow in a proton exchange membrane electrolyzer visualized in situ by simultaneous neutron radiography and optical imaging , 2013 .

[6]  Thomas A. Trabold,et al.  Water management studies in PEM fuel cells, Part I: Fuel cell design and in situ water distributions , 2009 .

[7]  Satish G. Kandlikar,et al.  Measurement of flow maldistribution in parallel channels and its application to ex-situ and in-situ experiments in PEMFC water management studies , 2009 .

[8]  Chao-Yang Wang,et al.  Visualization and quantification of cathode channel flooding in PEM fuel cells , 2009 .

[9]  S. Rowshanzamir,et al.  Water transport through a PEM (proton exchange membrane) fuel cell in a seven-layer model , 2013 .

[10]  Satish G. Kandlikar,et al.  Water management studies in PEM fuel cells, part IV: Effects of channel surface wettability, geometr , 2011 .

[11]  Colleen Spiegel,et al.  Designing and building fuel cells , 2007 .

[12]  Thomas A. Trabold,et al.  Water management studies in PEM fuel cells, Part II: Ex situ investigation of flow maldistribution, pressure drop and two-phase flow pattern in gas channels , 2009 .

[13]  Thirumalachari Sundararajan,et al.  The effect of flow distributors on the liquid water distribution and performance of a PEM fuel cell , 2012 .

[14]  C. Hebling,et al.  Visualization of water buildup in the cathode of a transparent PEM fuel cell , 2003 .

[15]  Eiji Endoh,et al.  Degradation study of MEA for PEMFCs under low humidity conditions , 2004 .

[16]  Aimy Bazylak,et al.  Liquid water visualization in PEM fuel cells: A review , 2009 .

[17]  Sangseok Yu,et al.  Thermal management strategy for a proton exchange membrane fuel cell system with a large active cell area , 2008 .

[18]  Zhigang Zhan,et al.  Visualization of water transport in a transparent PEMFC , 2012 .

[19]  S. Lee,et al.  Quantitative visualization of temporal water evolution in an operating polymer electrolyte fuel cell , 2010 .

[20]  Suresh G. Advani,et al.  Simultaneous Neutron and Optical Imaging in PEM Fuel Cells , 2009 .

[21]  Alexander Wokaun,et al.  In situ observation of the water distribution across a PEFC using high resolution neutron radiography , 2008 .

[22]  S. Kandlikar,et al.  Thermal management issues in a PEMFC stack – A brief review of current status , 2009 .

[23]  D. Wilkinson,et al.  Two-phase flow pressure drop hysteresis in parallel channels of a proton exchange membrane fuel cell , 2010 .

[24]  S. Lee,et al.  A review on experimental evaluation of water management in a polymer electrolyte fuel cell using X-ray imaging technique , 2013 .

[25]  Pierre Soille,et al.  Morphological Image Analysis: Principles and Applications , 2003 .

[26]  Ay Su,et al.  Studies on flooding in PEM fuel cell cathode channels , 2006 .

[27]  D. Wilkinson,et al.  A critical review of two-phase flow in gas flow channels of proton exchange membrane fuel cells , 2010 .

[28]  Wan Ramli Wan Daud,et al.  Water transport characteristics of a PEM fuel cell at various operating pressures and temperatures , 2013 .

[29]  S. Souza,et al.  Flow regimes for liquid water transport in a tapered flow channel of proton exchange membrane fuel cells (PEMFCs) , 2013 .

[30]  Ay Su,et al.  Study of water-flooding behaviour in cathode channel of a transparent proton-exchange membrane fuel cell , 2006 .

[31]  T. Zhao,et al.  Gas–liquid two-phase flow patterns in a miniature square channel with a gas permeable sidewall , 2004 .

[32]  Richard I. Masel,et al.  Quantitative MRI study of water distribution during operation of a PEM fuel cell using Teflon® flow fields , 2007 .

[33]  Xuan Liu,et al.  Flow dynamic characteristics in flow field of proton exchange membrane fuel cells , 2008 .

[34]  Evan J. See,et al.  Modeling gas flow in PEMFC channels: Part I – Flow pattern transitions and pressure drop in a simulated ex situ channel with uniform water injection through the GDL , 2012 .

[35]  Werner Lehnert,et al.  Investigation of water evolution and transport in fuel cells with high resolution synchrotron x-ray radiography , 2007 .

[36]  Dai-jun Yang,et al.  A review on water balance in the membrane electrode assembly of proton exchange membrane fuel cells , 2009 .

[37]  Michael M. Daino,et al.  Water management studies in PEM fuel cells, part III: Dynamic breakthrough and intermittent drainage characteristics from GDLs with and without MPLs , 2010 .

[38]  David L. Jacobson,et al.  In situ neutron imaging technique for evaluation of water management systems in operating PEM fuel cells , 2004 .

[39]  Jinfeng Wu,et al.  Diagnostic tools in PEM fuel cell research: Part II , 2008 .

[40]  D. Wilkinson,et al.  Gas–liquid two-phase flow behavior in minichannels bounded with a permeable wall , 2011 .

[41]  Mamdud Hossain,et al.  Water dynamics inside a cathode channel of a polymer electrolyte membrane fuel cell. , 2013 .

[42]  Alexander Wokaun,et al.  In situ diagnostic of two-phase flow phenomena in polymer electrolyte fuel cells by neutron imaging: Part A. Experimental, data treatment, and quantification , 2005 .

[43]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[44]  S. Kandlikar,et al.  Quantification and characterization of water coverage in PEMFC gas channels using simultaneous anode and cathode visualization and image processing , 2011 .