论文信息 - Inverted annular boiling in a stainless-steel tube with steady heat sources

Inverted annular boiling in a stainless-steel tube with steady heat sources

Abstract Simultaneous measurements of wall temperatures and vapor film thicknesses in an inverted annular film boiling are reported. The data correspond to bottom reflooding of a single tube uniformly heated with a steady electric heat source. The raw data are processed to yield the wall heat flux, heat transfer coefficient, quench front velocity, quench front temperature and void fraction, which may serve as a relatively complete comparative base for the development of theoretical models.

[1] D. Groeneveld,et al. Subcooled and low quality flow film boiling of water at atmospheric pressure , 1979 .

[2] G. Yadigaroglu,et al. Analytical model for bottom reflooding heat transfer in light water reactors (the UCFLOOD code) , 1978 .

[3] G. Yadigaroglu,et al. Heat transfer during the reflooding phase of the LOCA-state of the art , 1975 .

[4] E. Elias,et al. Inverted-annular film boiling heat transfer from vertical surfaces , 1981 .

[5] A.M.C. Chan,et al. Separated flow models—I. Analysis of the averaged and local instantaneous formulations , 1980 .

[6] E. D. Hughes,et al. Multi-fluid modeling of annular two-phase flow☆ , 1978 .

[7] R. Quirk,et al. Measurements of the radial and tangential eddy diffusivities of heat and mass in turbulent flow in a plain tube , 1972 .

[8] Warren M. Rohsenow,et al. Film boiling on the inside of vertical tubes with upward flow of the fluid at low qualities , 1963 .