Physico-chemical and mechanical characterization of hydraulic mortars containing nano-titania for restoration applications

In this work nano-titania of anatase and routile form has been added in mortars containing: (a) binders of either hydrated lime and metakaolin, or natural hydraulic lime and, (b) fine aggregates of carbonate nature. Mortar composition was tailored to ensure adhesion of fragments of porous limestones from the Acropolis monuments. The aim was to study the effect of nano-titania in the hydration and carbonation of the above binders, as well as the mechanical properties and the adhesive capability of the designed mortars, where the nano-titania proportion was 4.5–6% w/w of binder. The physico-chemical and mechanical properties of the nano-titania mortars were studied and compared to the respective ones, without the nano-titania addition. DTA-TG, FTIR, SEM and XRD analyses indicated the evolution of carbonation, hydration and hydraulic compound formation during a 1 year curing. Results indicate enhanced carbonation, hydration and modulus of elasticity of mortar mixtures with nano-titania. A specifically designed experimental procedure for measuring the direct tensile strength of the mortar–stone system proved that nano-titania mortars can be used as adhesive materials for porous limestones.

[1]  Ioanna Papayianni,et al.  Strength–porosity relationships in lime–pozzolan mortars , 2006 .

[2]  Rosário Veiga,et al.  INFLUENCE OF CHEMICAL AND MINERALOGICAL COMPOSITION OF METAKAOLIN ON MORTAR CHARACTERISTICS , 2009 .

[3]  M. Fardis,et al.  Application of 1H NMR to hydration and porosity studies of lime–pozzolan mixtures , 2011 .

[4]  Ioannis Karatasios,et al.  Hydraulic Lime Mortars for the Restoration of Historic Masonry in Crete , 2005 .

[5]  Ana Cristian Magalhães,et al.  Experimental applications of mortars with pozzolanic additions: Characterization and performance evaluation , 2009 .

[6]  Maria Vittoria Diamanti,et al.  Characterization of photocatalytic and superhydrophilic properties of mortars containing titanium dioxide , 2008 .

[7]  Kimberly E. Kurtis,et al.  Effect of Nano-sized Titanium Dioxide on Early Age Hydration of Portland Cement , 2009 .

[8]  Antonia Moropoulou,et al.  Physico-chemical study of Cretan ancient mortars , 2003 .

[9]  Eleni Aggelakopoulou,et al.  Properties of lime–metakolin mortars for the restoration of historic masonries , 2011 .

[10]  A. Nazari,et al.  The effects of TiO2 nanoparticles on physical, thermal and mechanical properties of concrete using ground granulated blast furnace slag as binder , 2011 .

[11]  J. Han,et al.  Characterization on titanium surfaces and its effect on photocatalytic bactericidal activity , 2010 .

[12]  A. L. Patterson.  The Scherrer Formula for X-Ray Particle Size Determination , 1939 .

[13]  Joseph S. Amstock,et al.  Handbook of Adhesives and Sealants in Construction , 2000 .

[14]  Ioannis Karatasios,et al.  Photo-induced carbonation of lime-TiO2 mortars , 2010 .

[15]  B. N. Whittaker,et al.  Rock Fracture Mechanics: Principles, Design and Applications , 1992 .

[16]  J. Monzó,et al.  Determination of the pozzolanic activity of fluid catalytic cracking residue. Thermogravimetric analysis studies on FC3R-lime pastes , 2003 .

[17]  V. Farmer.  The Infrared spectra of minerals , 1974 .