Effects of Spot Diameter and Sheets Thickness on Fatigue Life of Spot Welded Structure based on FEA Approach

This study presents the effect of the spot weld and sheets thickness on the fatigue life of the of the spot-weld joints to predict the lifetime and location of the weakest spot-welds due to the variable amplitude loading conditions. A simple model was used to illustrate the technique of spot-weld fatigue analysis. Finite element model and analysis were carried out utilizing the finite element analysis commercial codes. Linear elastic finite element analysis was carried out to predict the stress state along the weld direction. It can be seen from the results that the predicted life greatly influence the sheet thickness, nugget diameter and loading conditions of the model. Acquired results were shown the predicted life for the nugget and the two sheets around the circumference of the spot-weld at which angle the worst damage occurs. The spot-welding fatigue analysis techniques are awfully essential for automotive structure design.

[1]  Sheri Sheppard.  Further Refinement of a Methodology for Fatigue Life Estimation in Resistance Spot Weld Connections , 1996 .

[2]  R. B. Wilson,et al.  Fatigue Behavior of Spot Welded High Strength Steel Joints , 1981 .

[3]  Hong Tae Kang.  Fatigue damage parameter of spot welded joints under proportional loading , 2005 .

[4]  Won Wook Jung,et al.  Fatigue Failure and Reinforcing Method of Spot Welded Area at the Stage of Vehicle Development , 1996 .

[5]  Andreas Rupp,et al.  Computer Aided Dimensioning of Spot-Welded Automotive Structures , 1995 .

[6]  Robert Thompson,et al.  Static and Impact Strengths of Spot-Welded HSLA and Low Carbon Steel Joints , 1982 .

[7]  James A. Davidson,et al.  A Review of the Fatigue Properties of Spot-Welded Sheet Steels , 1983 .

[8]  Dieter Radaj,et al.  Stress intensity factors for spot welds between plates of unequal thickness , 1991 .

[9]  P.-C. Lin,et al.  Modeling of failure near spot welds in lap-shear specimens based on a plane stress rigid inclusion analysis , 2006 .

[10]  P. Wung,et al.  Failure of spot welds under in-plane static loading , 2001 .

[11]  Pingsha Dong,et al.  A structural stress definition and numerical implementation for fatigue analysis of welded joints , 2001 .

[12]  David Taylor,et al.  Sheet thickness effect of spot welds based on crack propagation , 2000 .

[13]  Sheri Sheppard,et al.  Stress intensity factors in spot welds , 2002 .

[14]  P. Wung,et al.  A force-based failure criterion for spot weld design , 2001 .

[15]  Dung-An Wang,et al.  A computational study of local stress intensity factor solutions for kinked cracks near spot welds in lap-shear specimens , 2005 .

[16]  Shicheng Zhang,et al.  A Simplified Spot Weld Model for Finite Element Analysis , 2004 .

[17]  P. Dong,et al.  CAE Weld Durability Prediction: A Robust Single Damage Parameter Approach , 2002 .

[18]  Hyungyil Lee,et al.  Overload analysis and fatigue life prediction of spot-welded specimens using an effective J-integral , 2005 .

[19]  T. Wehner,et al.  Ultimate Strength of Resistance Spot Welds Subjected to Combined Tension and Shear , 1998 .

[20]  Yung-Li Lee,et al.  Evaluation of multiaxial spot weld fatigue parameters for proportional loading , 2000 .

[21]  Pingsha Dong.  A Robust Structural Stress Procedure for Characterizing Fatigue Behavior of Welded Joints , 2001 .

[22]  Zoran Filipi,et al.  Simulation Study of a Series Hydraulic Hybrid Propulsion System for a Light Truck , 2007 .