RF-pad, Transmission Lines and balun optimization for 60GHz 65nm CMOS Power Amplifier

Design and optimization of 65nm CMOS passive devices which are used in the implementation of a 60GHz Power Amplifier (PA) are presented. The targeted application is the low cost Wireless Personal Area Network (WPAN). A new optimized Radio Frequency (RF)-pad is used to minimize the losses of the PA access. The PA is matched via balun and Transmission Lines (T-Lines). T-Lines ensure both broadband inter-stage matching and biasing. S-parameters and large signal measurement results are demonstrated and compared with electromagnetic simulations. The PA achieves a maximum output power Psat of 7.3dBm with a gain of 8.5dB while consuming 96mA from a 1.2V supply. The active die area of the chip is 0.065mm2. Additionally, innovative technique is adopted in the balun design to improve the balanced-to-unbalanced mode conversion and PA performances.

[1]  S. Reynolds,et al.  60 GHz transmitter circuits in 65nm CMOS , 2008, 2008 IEEE Radio Frequency Integrated Circuits Symposium.

[2]  Eric Kerherve,et al.  Optimized pad design for millimeter-wave applications with a 65nm CMOS RF technology , 2009, 2009 European Microwave Conference (EuMC).

[3]  W. L. Chan,et al.  A 60GHz-band 1V 11.5dBm power amplifier with 11% PAE in 65nm CMOS , 2009, 2009 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[4]  H. Gan,et al.  Integrated transformer baluns for RF low noise and power amplifiers , 2006, IEEE Radio Frequency Integrated Circuits (RFIC) Symposium, 2006.

[5]  R.W. Brodersen,et al.  Design of CMOS for 60GHz applications , 2004, 2004 IEEE International Solid-State Circuits Conference (IEEE Cat. No.04CH37519).