Strength and microstructure of cemented paste backfill modified with nano-silica particles and cured under non-isothermal conditions

[1]  M. Fall,et al.  Time- and Temperature-Dependence of Rheological Properties of Cemented Tailings Backfill with Sodium Silicate , 2021 .

[2]  M. Fall,et al.  Flow ability of cemented pastefill material that contains nano-silica particles , 2020 .

[3]  M. Fall,et al.  Strength development of cemented tailings materials containing polycarboxylate ether-based superplasticizer: experimental results on the effect of time and temperature , 2020 .

[4]  Andy Fourie,et al.  Cemented paste backfill for mineral tailings management: Review and future perspectives , 2019 .

[5]  M. Fall,et al.  Shear Behavior of the Interface Between Rock and Cemented Backfill: Effect of Curing Stress, Drainage Condition and Backfilling Rate , 2019, Rock Mechanics and Rock Engineering.

[6]  Yuanhui Li,et al.  An experimental study on compressive behaviour of cemented rockfill , 2019, Construction and Building Materials.

[7]  G. Corder,et al.  Re-Thinking Mining Waste through an Integrative Approach Led by Circular Economy Aspirations , 2019, Minerals.

[8]  F. Stellacci,et al.  Amorphous CaCO3: Influence of the Formation Time on Its Degree of Hydration and Stability. , 2018, Journal of the American Chemical Society.

[9]  M. I. Khan Nanosilica/silica fume , 2018 .

[10]  M. Fall,et al.  Sulphate induced changes in the reactivity of cemented tailings backfill , 2017 .

[11]  Liang Cui,et al.  A multiphysics-viscoplastic cap model for simulating blast response of cemented tailings backfill , 2017 .

[12]  Tikou Belem,et al.  Experimental investigation into the compressive strength development of cemented paste backfill containing Nano-silica , 2016 .

[13]  J. de Brito,et al.  Review on concrete nanotechnology , 2016 .

[14]  M. Fall,et al.  Sulphate effect on the early age strength and self-desiccation of cemented paste backfill , 2016 .

[15]  M. Lachemi,et al.  Nano-modification to improve the ductility of cementitious composites , 2015 .

[16]  T. Belem,et al.  Curing time effect on consolidation behaviour of cemented paste backfill containing different cement types and contents , 2015 .

[17]  Morteza Bastami,et al.  Performance of nano-Silica modified high strength concrete at elevated temperatures , 2014 .

[18]  Eduardo Júlio,et al.  The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete , 2014 .

[19]  S. Aleem,et al.  Hydration characteristic, thermal expansion and microstructure of cement containing nano-silica , 2014 .

[20]  L. Singh,et al.  Beneficial role of nanosilica in cement based materials – A review , 2013 .

[21]  Alireza Ghirian,et al.  Coupled thermo-hydro-mechanical–chemical behaviour of cemented paste backfill in column experiments. Part I: Physical, hydraulic and thermal processes and characteristics , 2013 .

[22]  Deyu Kong,et al.  Modification effects of colloidal nanoSiO2 on cement hydration and its gel property , 2013 .

[23]  Di Wu,et al.  Coupled Modeling of Temperature Distribution and Evolution in Cemented Tailings Backfill Structures that Contain Mineral Admixtures , 2012, Geotechnical and Geological Engineering.

[24]  Jahidul Islam,et al.  Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag , 2012 .

[25]  M. Fall,et al.  Coupled Thermochemical Effects on the Strength Development of Slag-Paste Backfill Materials , 2011 .

[26]  Dietmar Stephan,et al.  The influence of nano-silica on the hydration of ordinary Portland cement , 2011, Journal of Materials Science.

[27]  M Fall,et al.  Potential use of densified polymer-pastefill mixture as waste containment barrier materials. , 2010, Waste management.

[28]  Mamadou Fall,et al.  Coupled effects of sulphate and temperature on the strength development of cemented tailings backfills: Portland cement-paste backfill , 2010 .

[29]  M. Fall,et al.  A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill , 2010 .

[30]  S. Azam,et al.  Tailings Dam Failures: A Review of the Last One Hundred Years , 2010 .

[31]  J. L. Broadhurst,et al.  Mitigating the generation of acid mine drainage from copper sulfide tailings impoundments in perpetuity: A case study for an integrated management strategy , 2010 .

[32]  M. Fall,et al.  Modeling the heat development in hydrating CPB structures , 2009 .

[33]  P. Heikkinen,et al.  Geochemical Characterisation of Seepage and Drainage Water Quality from Two Sulphide Mine Tailings Impoundments: Acid Mine Drainage versus Neutral Mine Drainage , 2009 .

[34]  Mamadou Fall,et al.  Mechanical response of a mine composite material to extreme heat , 2008 .

[35]  Michel Aubertin,et al.  Integrated mine tailings management by combining environmental desulphurization and cemented paste backfill: Application to mine Doyon, Quebec, Canada , 2008 .

[36]  Farshad Rajabipour,et al.  Electrical conductivity of drying cement paste , 2007 .

[37]  Nagaratnam Sivakugan,et al.  Geotechnical considerations in mine backfilling in Australia , 2006 .

[38]  Ayhan Kesimal,et al.  Effect of properties of tailings and binder on the short-and long-term strength and stability of cemented paste backfill , 2005 .

[39]  Mamadou Fall,et al.  Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization , 2005 .

[40]  Mamadou Fall,et al.  Experimental characterization of the influence of tailings fineness and density on the quality of cemented paste backfill , 2005 .

[41]  Tikou Belem,et al.  A contribution to understanding the hardening process of cemented pastefill , 2004 .

[42]  A. Ballesteros,et al.  Bioencapsulation within synthetic polymers (Part 1): sol-gel encapsulated biologicals. , 2000, Trends in biotechnology.