Dynamic simulation of bioreactor systems using orthogonal collocation on finite elements

Abstract The dynamics of continuous biological processes is addressed in this paper. Numerical simulation of a conventional activated sludge process shows that despite the large differences in the dynamics of the species investigated. the orthogonal collocation on finite element technique with three internal collocation and four elements (OCFE-34) gives excellent numerical results for bioreactor models up to a Peclet number of 50. It is shown that there is little improvement in numerical accuracy when a much larger internal collocation point is introduced. Over and above Peclet number of 50, considered to be large for this process. simulation with the global orthogonal collocation (GOC) technique is infeasible. Due to the banded nature of its structural matrix, the method of lines (MOL) technique requires the lowest computing time, typically four times less than that required by the OCFE-34. Validation of the hydraulics of an existing pilot-scale subsurface flow (SSF) constructed wetland process using the aforementioned numerical techniques suggested that the OCFE is superior to the MOL and GOC in terms of numerical stability.

[1]  George Tchobanoglous,et al.  Wastewater Engineering Treatment Disposal Reuse , 1972 .

[2]  J. Chudoba,et al.  Control of activated sludge filamentous bulking—I. Effect of the hydraulic regime or degree of mixing in an aeration tank , 1973 .

[3]  Michael L. Michelsen,et al.  The axial dispersion model and orthogonal collocation , 1994 .

[4]  R. B. Newell,et al.  Dynamic modelling and simulation of activated sludge process using orthogonal collocation approach , 1999 .

[5]  Laura Gardini,et al.  Use of orthogonal collocation on finite elements with moving boundaries for fixed bed catalytic reactor simulation , 1985 .

[6]  K. Kaczmarski,et al.  Use of orthogonal collocation on finite elements with moving boundaries in the simulation of non-linear multicomponent chromatography. Influence of fluid velocity variation on retention time in LC and HPLC , 1996 .

[7]  G. T. Tsao,et al.  Extended Monod equation for batch cultures with multiple exponential phases , 1975 .

[8]  B. Finlayson.  Nonlinear analysis in chemical engineering , 1980 .

[9]  DYNAMICS AND CONTROL OF SOLIDS-LIQUID SEPARATION IN THE ACTIVATED SLUDGE PROCESS , 1985 .

[10]  R. G. Bond,et al.  Wastewater : treatment and disposal , 1974 .

[11]  C. P. L. Grady,et al.  SSSP ― simulation of single-sludge processes , 1988 .

[12]  Hasan Ali San.  Impact of dispersion and reaction kinetics on performance of biological reactors : solution by S series , 1994 .

[13]  Alexandru Braha,et al.  Use of monod kinetics on multi-stage bioreactors , 1985 .

[14]  O. Levenspiel.  Chemical Reaction Engineering , 1972 .

[15]  Gustaf Olsson,et al.  The dissolved oxygen profile—A valuable tool for control of the activated sludge process , 1978 .

[16]  C. Grady,et al.  Biological wastewater treatment: theory and applications , 1980 .

[17]  S. Kiil,et al.  Solution of transient problems with steep gradients: Novel front-tracking strategy , 1995 .

[18]  M. Morbidelli,et al.  Modeling fixed-bed adsorption columns through orthogonal collocations on moving finite elements , 1997 .

[19]  Georges Guiochon,et al.  Application of orthogonal collocation on finite elements in the simulation of non-linear chromatography , 1991 .

[20]  P. V. Danckwerts.  Continuous flow systems , 1953 .

[21]  L. Pibouleau,et al.  Simulation via orthogonal collocation on finite element of a chromatographic column with nonlinear isotherm , 1991 .

[22]  Tony Howes,et al.  Hydraulic tracer studies in a pilot scale subsurface flow constructed wetland , 1997 .

[23]  P. V. Danckwerts.  Continuous flow systems. Distribution of residence times , 1995 .

[24]  J. Villadsen,et al.  Solution of differential equation models by polynomial approximation , 1978 .

[25]  B. Finlayson,et al.  Orthogonal collocation on finite elements , 1975 .