Bridging the Microstructural Evolutions from Slurry to Porous Electrode of a Lithium-Ion Battery

[1]  A. West,et al.  Gradient Architecture Design in Scalable Porous Battery Electrodes. , 2022, Nano letters.

[2]  C. Costa,et al.  Electrode fabrication process and its influence in lithium-ion battery performance: State of the art and future trends , 2022, Electrochemistry Communications.

[3]  D. Brett,et al.  A Review of Lithium‐Ion Battery Electrode Drying: Mechanisms and Metrology , 2021, Advanced Energy Materials.

[4]  A. Franco,et al.  Carbon-Binder Migration: A Three-Dimensional Drying Model for Lithium-ion Battery Electrodes , 2021, Energy Storage Materials.

[5]  M. Bazant,et al.  Guiding the Design of Heterogeneous Electrode Microstructures for Li‐Ion Batteries: Microscopic Imaging, Predictive Modeling, and Machine Learning , 2021, Advanced Energy Materials.

[6]  W. He,et al.  Challenges and Recent Advances in High Capacity Li‐Rich Cathode Materials for High Energy Density Lithium‐Ion Batteries , 2021, Advanced materials.

[7]  P. Vázquez,et al.  Understanding the calendering processability of Li(Ni0.33Mn0.33Co0.33)O2-based cathodes , 2021, Journal of Power Sources.

[8]  G. Hinds,et al.  Microstructural Evolution of Battery Electrodes During Calendering , 2020, Joule.

[9]  M. Safari,et al.  Demystifying Charge Transport Limitations in the Porous Electrodes of Lithium‐Ion Batteries , 2020, Advanced Energy Materials.

[10]  Guihua Yu,et al.  Multiscale Understanding and Architecture Design of High Energy/Power Lithium‐Ion Battery Electrodes , 2020, Advanced Energy Materials.

[11]  M. Wohlfahrt‐Mehrens,et al.  Manufacturing Process for Improved Ultra‐Thick Cathodes in High‐Energy Lithium‐Ion Batteries , 2020, Energy Technology.

[12]  Ricardo Pinto Cunha,et al.  Artificial Intelligence Investigation of NMC Cathode Manufacturing Parametersinterdependencies , 2019, ECS Meeting Abstracts.

[13]  V. Battaglia,et al.  Microrheological modeling of lithium ion battery anode slurry , 2019, Journal of Power Sources.

[14]  W. Hawley,et al.  Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing , 2019, Journal of Energy Storage.

[15]  Liangbing Hu,et al.  Thick Electrode Batteries: Principles, Opportunities, and Challenges , 2019, Advanced Energy Materials.

[16]  João Coelho,et al.  Quantifying the factors limiting rate performance in battery electrodes , 2018, Nature Communications.

[17]  Thierry Douillard,et al.  Multiscale Morphological and Electrical Characterization of Charge Transport Limitations to the Power Performance of Positive Electrode Blends for Lithium‐Ion Batteries , 2017 .

[18]  Gen Inoue,et al.  Numerical and experimental evaluation of the relationship between porous electrode structure and effective conductivity of ions and electrons in lithium-ion batteries , 2017 .

[19]  Zhijia Du,et al.  Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries , 2017, Journal of Applied Electrochemistry.

[20]  W. Bauer,et al.  Investigation of film solidification and binder migration during drying of Li-Ion battery anodes , 2016 .

[21]  Paul R. Shearing,et al.  On the origin and application of the Bruggeman correlation for analysing transport phenomena in electrochemical systems , 2016 .

[22]  M. Youssry,et al.  Non-aqueous carbon black suspensions for lithium-based redox flow batteries: rheology and simultaneous rheo-electrical behavior. , 2013, Physical chemistry chemical physics : PCCP.

[23]  D. Genovese.  Shear rheology of hard-sphere, dispersed, and aggregated suspensions, and filler-matrix composites. , 2012, Advances in colloid and interface science.

[24]  B. Lestriez.  Functions of polymers in composite electrodes of lithium ion batteries , 2010 .