A CL surface deformation approach for constant scallop height tool path generation from triangular mesh

In this paper, we present a cutter location (CL) surface deformation approach for constant scallop height tool path generation from triangular mesh. The triangular mesh model of the stereo lithography (STL) format is offset to the CL surface and then deformed in accordance with the deformation vectors, which are computed by the slope and the curvature of the CL surface. In addition, the tool path, which is computed by slicing the deformed CL surface, is inversely deformed by those same deformation vectors to a tool path with a constant scallop height. The proposed method is implemented, and a tool path is generated and tested by simulation and by numerical control (NC) machining. The scallop height was found to be constant over the entire machined surface, demonstrating much better quality than that of mesh slicing, under the same constraints for machining time.

[1]  Hsi-Yung Feng,et al.  Integrated tool path and feed rate optimization for the finishing machining of 3D plane surfaces , 2000 .

[2]  Hsi-Yung Feng,et al.  Constant scallop-height tool path generation for three-axis sculptured surface machining , 2002, Comput. Aided Des..

[3]  Byoung Kyu Choi,et al.  Compound surface modelling and machining , 1988 .

[4]  Min-Yang Yang,et al.  Offset Triangular Mesh Using the Multiple Normal Vectors of a Vertex , 2004 .

[5]  Yoram Koren,et al.  Efficient Tool-Path Planning for Machining Free-Form Surfaces , 1996 .

[6]  Peiqing Ye,et al.  A tool path generation strategy for sculptured surfaces machining , 2002 .

[7]  Dong-Soo Kim,et al.  A new curve-based approach to polyhedral machining , 2002, Comput. Aided Des..

[8]  Seung-Han Yang,et al.  CNC tool-path planning for high-speed high-resolution machining using a new tool-path calculation algorithm , 2002 .

[9]  Krishnan Suresh,et al.  Constant Scallop-height Machining of Free-form Surfaces , 1994 .

[10]  Aun Neow Poo,et al.  Adaptive iso-planar tool path generation for machining of free-form surfaces , 2003, Comput. Aided Des..

[11]  Eungki Lee,et al.  Contour offset approach to spiral toolpath generation with constant scallop height , 2003, Comput. Aided Des..

[12]  Debasish Dutta,et al.  The geometry and generation of NC tool paths , 1997 .

[13]  C. K. Au.  A Path Interval Generation Algorithm in Sculptured Object Machining , 2001 .

[14]  Brent Stucker,et al.  A 3D surface offset method for STL‐format models , 2003 .

[15]  Bahattin Koc,et al.  Non-uniform offsetting and hollowing objects by using biarcs fitting for rapid prototyping processes , 2002, Comput. Ind..

[16]  Christophe Tournier,et al.  A Surface Based Approach for Constant Scallop HeightTool-Path Generation , 2002 .

[17]  Sang C. Park.  Sculptured surface machining using triangular mesh slicing , 2004, Comput. Aided Des..