Purpose – Most current additive manufacturing (AM) processes are layer based. By converting a three‐dimensional model into two‐dimensional layers, the process planning can be dramatically simplified. However, there are also drawbacks associated with such an approach such as inconsistent material properties and difficulty in embedding existing components. The purpose of this paper is to present a novel AM process that is non‐layer based and demonstrate its unique capability.Design/methodology/approach – An AM process named computer numerically controlled (CNC) accumulation has been developed. In such a layerless AM process, a fiber optic‐cable connected with an ultraviolet (UV) LED and related lens is served as an accumulation tool. The cable is then merged inside a tank that is filled with UV‐curable liquid resin. By controlling the on/off state of the UV‐LED and the multi‐axis motion of the cable, a physical model can be built by selectively curing liquid resin into solid.Findings – It is found that the ...
[1]
Karlo Apro,et al.
Secrets of 5-axis machining
,
2008
.
[2]
Paul F. Jacobs,et al.
Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography
,
1992
.
[3]
David W. Rosen,et al.
Building around inserts: methods for fabricating complex devices in stereolithography
,
2001
.
[4]
Ryan B. Wicker,et al.
Fused deposition modeling of patient‐specific polymethylmethacrylate implants
,
2010
.
[5]
Frank W. Liou,et al.
Applications of a hybrid manufacturing process for fabrication of metallic structures
,
2007
.
[6]
Robert P. Mudge,et al.
Laser engineered net shaping advances additive manufacturing and repair
,
2007
.
[7]
张哉根,et al.
Leu-M
,
1991
.