论文信息 - Setting SIR Targets for CDMA Mobile Systems in the Presence of SIR Measurement Error

Setting SIR Targets for CDMA Mobile Systems in the Presence of SIR Measurement Error

This letter addresses how to set SIR targets higher than normally required, in order to mitigate the effect of signal-to-interference ratio (SIR) measurement error included in power control steps. We find that scaling up the SIR targets by 1 dB is conformable to resisting SIR measurement error for code division multiple access (CDMA) mobile systems. key words: SIR target setting, CDMA mobile system

Dongwoo Kim

[1] Dongwoo Kim. Downlink power allocation and adjustment for CDMA cellular systems , 1997, IEEE Communications Letters.

[2] K. Dongwoo. Downlink power allocation and adjustment for CDMA cellular systems , 1997 .

[3] Andrew J. Viterbi,et al. Erlang Capacity of a Power Controlled Cdma System , 1993, Proceedings. IEEE International Symposium on Information Theory.

[4] Jens Zander,et al. Gradual removals in cellular PCS with constrained power control and noise , 1996, Wirel. Networks.

[5] Roy D. Yates,et al. A Framework for Uplink Power Control in Cellular Radio Systems , 1995, IEEE J. Sel. Areas Commun..

[6] Dongwoo Kim,et al. Forward Link Power Control for CDMA Cellular Systems , 1998 .

[7] Jens Zander,et al. Performance of optimum transmitter power control in cellular radio systems , 1992 .

[8] Donald Rockwell,et al. Guide to Electronic Measurements and Laboratory Practice , 1977 .

[9] Yiu-Wing Leung. Power control in cellular networks subject to measurement error , 1996, IEEE Trans. Commun..