Slip Band Evolution Behavior near Circular Hole on Single Crystal Superalloy: Experiment and Simulation

[1]  Yang Gui,et al.  Enhanced strength-ductility synergy of medium-entropy alloys via multiple level gradient structures , 2023, International Journal of Plasticity.

[2]  Qinjia Wang,et al.  Insight into the low cycle fatigue deformation mechanisms of minor element doping single crystal superalloys at elevated temperature , 2023, Scripta Materialia.

[3]  M. Zaiser,et al.  Geometrically necessary dislocations and related kinematic hardening in gradient grained materials: A nonlocal crystal plasticity study , 2023, International Journal of Plasticity.

[4]  Z. Yue,et al.  Microstructure characterization and damage coupled constitutive modeling of nickel-based single-crystal alloy with different orientations , 2022, Materials Science and Engineering: A.

[5]  Qinjia Wang,et al.  Enhancement of high temperature low cycle fatigue lifetime of PWA1484 superalloy artificial bicrystals via boron-induced grain boundary strengthening , 2022, International Journal of Fatigue.

[6]  A. Vinogradov,et al.  Stored and dissipated energy of plastic deformation revisited from the viewpoint of dislocation kinetics modelling approach , 2022, Acta Materialia.

[7]  Xiaojun Yan,et al.  Matrix Channel Width Evolution of Single Crystal Superalloy Under Creep and Thermal Mechanical Fatigue: Experimental and Modeling Investigations , 2022, Metals and Materials International.

[8]  C. Bailey,et al.  A multi-scale approach to microstructure-sensitive thermal fatigue in solder joints , 2022, International Journal of Plasticity.

[9]  Qinjia Wang,et al.  Enhanced creep resistance induced by minor Ti additions to a second generation nickel-based single crystal superalloy , 2022, Acta Materialia.

[10]  D. Shi,et al.  Multi-scale modelling of rafting behaviour under complex stress states for Ni3Al superalloys , 2022, International Journal of Plasticity.

[11]  B. Pan,et al.  Rapid and Repeatable Fluorescent Speckle Pattern Fabrication Using a Handheld Inkjet Printer , 2022, Experimental Mechanics.

[12]  Xiaoguang Yang,et al.  Low cycle fatigue behaviour of a single crystal Ni-based superalloy with a central hole: Effect of inhomogeneous rafting microstructure , 2021 .

[13]  Z. Yue,et al.  Fatigue crack initiation and propagation behavior of nickel-based single crystal DD6 under different drilling processes , 2021, Materials Science and Engineering: A.

[14]  A. Shutov,et al.  Large strain integral-based nonlocal simulation of ductile damage with application to mode-I fracture , 2021 .

[15]  A. Mayer,et al.  Prediction of shear strength of cluster-strengthened aluminum with multi-scale approach describing transition from cutting to bypass of precipitates by dislocations , 2021 .

[16]  J. Malzbender,et al.  Failure mechanism and lifetime of various laser-drilled APS-TBC systems under LCF conditions , 2021 .

[17]  Jia Huang,et al.  A modified constitutive model considering microstructure degradation of Ni-based superalloys and its application to microstructural damage calculation , 2021 .

[18]  Xiaojun Yan,et al.  Experimental and Analytical Investigation on Service Life of Film Cooling Structure for Single Crystal Turbine Blade , 2021 .

[19]  Xiaojun Yan,et al.  Physics-based modeling of γ/γ′ microstructure evolution and creep constitutive relation for single crystal superalloy , 2021 .

[20]  C. Greiner,et al.  On the origin of microstructural discontinuities in sliding contacts: A discrete dislocation plasticity analysis , 2021 .

[21]  C. Bronkhorst,et al.  Crystal plasticity model for single crystal Ni-based superalloys: Capturing orientation and temperature dependence of flow stress , 2020 .

[22]  Zheng Zhang,et al.  Failure mechanism of turbine guide vane and oxide composition analysis on the surface of failure vane cracks , 2020 .

[23]  M. Sangid,et al.  The Interaction of Point Defects with Stress Fields Generated by Persistent Slip Bands in Face‐Centered Cubic Nickel , 2020, Advanced Engineering Materials.

[24]  Jianwei Liang,et al.  Creep rupture mechanism and microstructure evolution around film-cooling holes in nickel-based single crystal superalloy specimen , 2020 .

[25]  C. Hutchinson,et al.  A new total‐Lagrangian smooth particle hydrodynamics approximation for the simulation of damage and fracture of ductile materials , 2020, International Journal for Numerical Methods in Engineering.

[26]  B. Gault,et al.  Crack initiation mechanisms during very high cycle fatigue of Ni-based single crystal superalloys at high temperature , 2020 .

[27]  Chunhua Wang,et al.  Recent advances in film cooling enhancement: A review , 2020 .

[28]  Daniel S. Balint,et al.  Discrete dislocation, crystal plasticity and experimental studies of fatigue crack nucleation in single-crystal nickel , 2020 .

[29]  Z. Yue,et al.  Microcrack initiation behavior around film cooling holes in a Ni-based single crystal: In situ observation and crystal plastic analysis , 2020 .

[30]  T. Jackson,et al.  A Multiscale Study on the Morphology and Evolution of Slip Bands in a Nickel-Based Superalloy During Low Cycle Fatigue , 2020, Acta Materialia.

[31]  Jean Briac Le Graverend.  A hardening-based damage model for fast-evolving microstructures: Application to Ni-based single crystal superalloys , 2019 .

[32]  Z. Yue,et al.  The inter-hole interference on creep deformation behavior of nickel-based single crystal specimen with film-cooling holes , 2019, International Journal of Mechanical Sciences.

[33]  Hongjian Zhang,et al.  Crystal orientation effect on fretting fatigue induced geometrically necessary dislocation distribution in Ni-based single-crystal superalloys , 2019, Acta Materialia.

[34]  Q. Feng,et al.  Evaluation of microstructural degradation in a failed gas turbine blade due to overheating , 2019, Engineering Failure Analysis.

[35]  Pei Wang,et al.  Crystal plasticity analysis of cylindrical holes and their effects on the deformation behavior of Ni-based single-crystal superalloys with different secondary orientations , 2019, International Journal of Plasticity.

[36]  Hangshan Gao,et al.  In-situ observation of crack initiation and propagation in Ni-based superalloy with film cooling holes during tensile test , 2019, Journal of Alloys and Compounds.

[37]  A. Beaudoin,et al.  Utilizing a novel lattice orientation based stress characterization method to study stress fields of shear bands , 2019, Journal of the Mechanics and Physics of Solids.

[38]  P. He,et al.  Creep residual life prediction of a nickel-based single crystal superalloy based on microstructure evolution , 2019, Materials Science and Engineering: A.

[39]  S. Bossuyt,et al.  Quantifying the Effectiveness of Patterning, Test Conditions, and DIC Parameters for Characterization of Plastic Strain Localization , 2019, Experimental Mechanics.

[40]  Heng Zhang,et al.  High temperature tensile behavior of a thin-walled Ni based single-crystal superalloy with cooling hole: In-situ experiment and finite element calculation , 2019, Journal of Alloys and Compounds.

[41]  M. Pham,et al.  Crystal plasticity analysis of deformation anisotropy of lamellar TiAl alloy: 3D microstructure-based modelling and in-situ micro-compression , 2019, International Journal of Plasticity.

[42]  M. Barnett,et al.  An Orowan precipitate strengthening equation for mechanical twinning in Mg , 2019, International Journal of Plasticity.

[43]  Z. Yue,et al.  Surface slip deformation characteristics for perforated Ni-based single crystal thin plates with square and triangular penetration patterns , 2018 .

[44]  K. Thole,et al.  State-of-the-Art Cooling Technology for a Turbine Rotor Blade , 2017, Journal of Turbomachinery.

[45]  Zhengyang Xu,et al.  Machining of a film-cooling hole in a single-crystal superalloy by high-speed electrochemical discharge drilling , 2016 .

[46]  J. Cormier,et al.  Grain boundary–slip bands interactions: Impact on the fatigue crack initiation in a polycrystalline forged Ni-based superalloy , 2015 .

[47]  Justin A. Blaber,et al.  Ncorr: Open-Source 2D Digital Image Correlation Matlab Software , 2015, Experimental Mechanics.

[48]  J. Mendez,et al.  A microstructure-sensitive constitutive modeling of the inelastic behavior of single crystal nickel-based superalloys at very high temperature , 2014 .

[49]  F. Feyel,et al.  Modelling crystal plasticity by 3D dislocation dynamics and the finite element method: The Discrete-Continuous Model revisited , 2014 .

[50]  G. Cailletaud,et al.  Constitutive modeling of the creep behavior of single crystal superalloys under non-isothermal conditions inducing phase transformations , 2010 .

[51]  Roger C. Reed,et al.  A model for the creep deformation behaviour of single-crystal superalloy CMSX-4 , 2008 .

[52]  A. Wilkinson,et al.  Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystal , 2007 .

[53]  J. Moosbrugger,et al.  Finite element simulation of PSB macroband nucleation and propagation in single crystal nickel cycled at low plastic strain amplitudes , 2006 .

[54]  Chung-Souk Han,et al.  Mechanism-based strain gradient crystal plasticity—I. Theory , 2005 .

[55]  F. Ebrahimi,et al.  Slip analysis in a Ni-base superalloy , 2005 .

[56]  Milan Jirásek,et al.  Nonlocal integral formulations of plasticity and damage : Survey of progress , 2002 .

[57]  Qingchuan Zhang,et al.  Glare: A free and open-source software for generation and assessment of digital speckle pattern , 2022 .

[58]  A. Dogui,et al.  Material rotating frame, rate-independent plasticity with regularization of Schmid law and study of channel-die compression , 2019 .

[59]  M. Rubin,et al.  A rate-independent crystal plasticity model with a smooth elastic–plastic transition and no slip indeterminacy , 2016 .

[60]  S. Forest,et al.  Effect of secondary orientation on notch-tip plasticity in superalloy single crystals , 2012 .

[61]  J. Lemaître.  A CONTINUOUS DAMAGE MECHANICS MODEL FOR DUCTILE FRACTURE , 1985 .