Local–global strategy for the prediction of residual stresses in FSW processes

[1]  Miguel Cervera,et al.  Current developments on the coupled thermomechanical computational modeling of metal casting processes , 2019 .

[2]  Miguel Cervera,et al.  Numerical modeling of the electron beam welding and its experimental validation , 2016 .

[3]  Miguel Cervera,et al.  3D numerical models using a fluid or a solid formulation of FSW processes with a non-cylindrical pin , 2015, Adv. Model. Simul. Eng. Sci..

[4]  M. Chiumenti,et al.  Material flow visualization in Friction Stir Welding via particle tracing , 2015 .

[5]  Miguel Cervera,et al.  Comparison of a Fluid and a Solid Approach for the Numerical Simulation of Friction Stir Welding with a Non‐Cylindrical Pin , 2014 .

[6]  Sergio R. Idelsohn,et al.  Numerical Simulations of Coupled Problems in Engineering , 2014 .

[7]  Mehdi Iranmanesh,et al.  Prediction of asymmetric transient temperature and longitudinal residual stress in friction stir welding of 304L stainless steel , 2014 .

[8]  M. Chiumenti,et al.  Computational Modeling and Sub-Grid Scale Stabilization of Incompressibility and Convection in the Numerical Simulation of Friction Stir Welding Processes , 2014 .

[9]  Filipe Teixeira-Dias,et al.  Integrated Design and Numerical Simulation of Stiffened Panels Including Friction Stir Welding Effects , 2013 .

[10]  C. A. Saracibar,et al.  A novel stress-accurate FE technology for highly non-linear analysis with incompressibility constraint. Application to the numerical simulation of the FSW process , 2013 .

[11]  Miguel Cervera,et al.  Numerical modeling of friction stir welding processes , 2013 .

[12]  Miguel Cervera,et al.  An apropos kinematic framework for the numerical modeling of friction stir welding , 2013 .

[13]  Joseph Butterfield,et al.  The Influence of Friction Stir Welding Process Idealization on Residual Stress and Distortion Predictions for Future Airframe Assembly Simulations , 2012 .

[14]  Livan Fratini,et al.  Residual stresses in friction stir welded parts of complex geometry , 2012 .

[15]  Aiping Wu,et al.  Predicting residual distortion of aluminum alloy stiffened sheet after friction stir welding by numerical simulation , 2011 .

[16]  Livan Fratini,et al.  Numerical procedure for residual stresses prediction in friction stir welding , 2011 .

[17]  Miguel Cervera,et al.  Finite element modeling of multi-pass welding and shaped metal deposition processes , 2010 .

[18]  Miguel Cervera,et al.  A Computational Model for the Numerical Simulation of FSW Processes , 2010 .

[19]  Matthew D. Piggott,et al.  Conservative interpolation between unstructured meshes via supermesh construction , 2009 .

[20]  Miguel Cervera,et al.  On the Numerical Modeling of the Thermomechanical Contact for Metal Casting Analysis , 2008 .

[21]  K. Dang Van,et al.  Modelling of the residual state of friction stir welded plates , 2008 .

[22]  David Dureisseix,et al.  Information transfer between incompatible finite element meshes: Application to coupled thermo-viscoelasticity , 2006 .

[23]  Michael A. Sutton,et al.  Predicting residual thermal stresses in friction stir welded metals , 2006 .

[24]  Yuh J. Chao,et al.  Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel , 2004 .

[25]  Hugh Shercliff,et al.  Thermomechanical FE modelling of friction stir welding of Al-2024 including tool loads , 2003 .

[26]  M. H. Maitournam,et al.  Steady-state flow in classical elastoplasticity: Applications to repeated rolling and sliding contact , 1993 .

[27]  Miguel Cervera,et al.  Numerical Simulation and Visualization of Material Flow in Friction Stir Welding via Particle Tracing , 2014 .

[28]  Miguel Cervera Ruiz,et al.  Advances in the numerical simulation of 3D FSW processes , 2011 .