Effect of thermal and oxidative treatments of activated carbon on its surface structure and suitability as a support for barium-promoted ruthenium in ammonia synthesis catalysts

Abstract The effect of heat-treating a typical activated carbon at 1600–2500 °C on its structural and textural properties was investigated by gas sorption and X-ray diffraction. Particular attention was paid to the recovery of the surface area and porosity of thermally treated carbons by means of oxidation treatments. It was found that the thermal modification of activated carbon could eliminate carbon impurities, bring about different degrees of graphitization, and improve the resistance of the carbon support to undergo methanation under ammonia synthesis conditions, but the surface area and porosity decreased dramatically. Oxidative treatment partially recovered the surface area and porosity. The higher the thermal treatment temperature, the greater the stability of the carbon support, and the more difficult the recovery of the surface area and porosity becomes. A series of unpromoted ruthenium/carbon catalysts showed that the highly developed texture of the carbon support resulted in a significant increase in Ru dispersion. The ammonia synthesis activity of a Ba-promoted Ru catalyst was greatly improved by using activated carbon C1900ox as a support, which was heated at 1900 °C in an inert atmosphere and then subjected to oxidation treatment.

[1]  F. Rodríguez-Reinoso,et al.  The role of carbon materials in heterogeneous catalysis , 1998 .

[2]  K. Aika,et al.  Promoter Effect of Sm2O3on Ru/Al2O3in Ammonia Synthesis , 1996 .

[3]  K. Aika,et al.  Preparation and characterization of chlorine-free ruthenium catalysts and the promoter effect in ammonia synthesis: 2. A lanthanide oxide-promoted Ru/Al2O3 catalyst , 1992 .

[4]  Zhaobin Wei,et al.  Ammonia synthesis over Ru/C catalysts with different carbon supports promoted by barium and potassium compounds , 2001 .

[5]  O. Kato,et al.  Support and promoter effect of ruthenium catalyst. III. Kinetics of ammonia synthesis over various Ru catalysts , 1986 .

[6]  J. Lunsford,et al.  Characterization and Ammonia Synthesis Activity of Ruthenium Zeolite Catalysts , 1993 .

[7]  J. Pielaszek,et al.  Effect of potassium and barium on the stability of a carbon-supported ruthenium catalyst for the synthesis of ammonia , 1998 .

[8]  Robert J. Davis,et al.  Ammonia Synthesis Catalyzed by Ruthenium Supported on Basic Zeolites , 1996 .

[9]  K. Aika,et al.  Preparation and characterization of chlorine-free ruthenium catalysts and the promoter effect in ammonia synthesis: 3. A magnesia-supported ruthenium catalyst , 1992 .

[10]  V. Shur,et al.  New type of carbon coated alumina supports for the preparation of highly ctive ruthenium catalysts for ammonia synthesis , 1990 .

[11]  K. Aika,et al.  Removal of chlorine ions from Ru/MgO catalysts for ammonia synthesis , 1992 .

[12]  Zhi-hua Zhong,et al.  EFFECT OF HYDROGEN TREATMENT OF ACTIVE CARBON AS A SUPPORT FOR PROMOTED RUTHENIUM CATALYSTS FOR AMMONIA SYNTHESIS , 1997 .

[13]  E. Auer,et al.  Carbons as supports for industrial precious metal catalysts , 1998 .

[14]  J. Sentek,et al.  Studies on kinetics of ammonia synthesis over ruthenium catalyst supported on active carbon , 1996 .

[15]  J. Kubota,et al.  Infrared Studies of Adsorbed Dinitrogen on Supported Ruthenium Catalysts for Ammonia Synthesis : Effects of the Alumina and Magnesia Supports and the Cesium Compound Promoter , 1994 .

[16]  J. Suwalski,et al.  Thermally modified active carbon as a support for catalysts for NH3 synthesis , 1996 .

[17]  K. Shirota,et al.  Support and promoter effect of ruthenium catalyst: I. Characterization of alkali-promoted ruthenium/alumina catalysts for ammonia synthesis , 1985 .

[18]  P. S. Prasad,et al.  Hysteresis during ammonia synthesis over promoted ruthenium catalysts supported on carbon-covered alumina☆ , 1991 .

[19]  I. Rossetti,et al.  Promoters effect in Ru/C ammonia synthesis catalyst , 2001 .

[20]  Zhi-hua Zhong,et al.  The Effect of Hydrogen Treatment of Active Carbon on Ru Catalysts for Ammonia Synthesis , 1998 .

[21]  I. Rossetti,et al.  Carbon-supported promoted Ru catalyst for ammonia synthesis , 1999 .

[22]  A. Presz,et al.  Carbon-supported ruthenium catalyst for the synthesis of ammonia. The effect of the carbon support and barium promoter on the performance , 1999 .

[23]  K. Aika,et al.  A New Catalyst System for Ammonia Synthesis , 1971 .