Ion mixing at 20 keV: a comparison of the effects of Ga+, Ar+ and CF4+ ion irradiation.

[1]  M. Menyhárd,et al.  Determination of relative sputtering yield of Cr/Si , 2007 .

[2]  Á. Barna,et al.  Ion beam mixing by focused ion beam , 2007 .

[3]  M. Jenko,et al.  FIB damage of Cu and possible consequences for miniaturized mechanical tests , 2007 .

[4]  B. Schmidt,et al.  Defect induced formation of CoSi2 nanowires by focused ion beam synthesis , 2006 .

[5]  P. Facci,et al.  Electrical characterization and Auger depth profiling of nanogap electrodes fabricated by I2-assisted focused ion beam , 2006 .

[6]  L. Bischoff.  Alloy liquid metal ion sources and their application in mass separated focused ion beams. , 2005, Ultramicroscopy.

[7]  K. Sasaki,et al.  Surface damage induced by focused-ion-beam milling in a Si/Si p–n junction cross-sectional specimen , 2005 .

[8]  N. Winograd,et al.  Use of C60 cluster projectiles for sputter depth profiling of polycrystalline metals , 2004 .

[9]  J. Chapman,et al.  Effect of Ga+ ion irradiation on the structural and magnetic properties of CoFe/IrMn exchange biased bilayers , 2004 .

[10]  J. Bain,et al.  Measurement of Ga implantation profiles in the sidewall and bottom of focused-ion-beam-etched structures , 2004 .

[11]  J. Gyulaia,et al.  Radiation Damage and Annealing in Silicon after Ion Implantation , 2004 .

[12]  J. González,et al.  Improvements in focused ion beam micromachining of interconnect materials , 2002 .

[13]  M. Posselt,et al.  TRIDYN_FZR User Manual , 2010 .

[14]  J. Teichert,et al.  Focused ion beam sputtering investigations on SiC , 2001 .

[15]  G. Hobler,et al.  Simulation of topography evolution and damage formation during TEM sample preparation using focused ion beams , 2001 .

[16]  J. McCaffrey,et al.  Surface damage formation during ion-beam thinning of samples for transmission electron microscopy. , 2001, Ultramicroscopy.

[17]  Koji Watanabe,et al.  Quantitative Characterization of Roughness at SiO2/Si Interfaces by Using Cross-sectional High-resolution Transmission Electron Microscopy , 2000 .

[18]  A. Benninghoven,et al.  Optimized time-of-flight secondary ion mass spectroscopy depth profiling with a dual beam technique , 1997 .

[19]  Á. Barna,et al.  Auger Depth Profile Analysis of Deeply Buried Interfaces , 1994 .

[20]  W. Bolse.  Ion-beam induced atomic transport through bi-layer interfaces of low- and medium-Z metals and their nitrides , 1994 .

[21]  J. F. Ziegler,et al.  Handbook of ion implantation technology , 1992 .

[22]  R. Zuhr,et al.  Beam-solid interactions : physical phenomena : symposium held November 27-December 1, 1989, Boston, Massachusetts, U.S.A. , 1990 .

[23]  G. Scilla,et al.  Application of a trifluorocarbon ion (CF3+) primary ion source for depth profiling in secondary-ion mass spectrometry , 1988 .

[24]  J. Fine,et al.  An analytical expression for describing Auger sputter depth profile shapes of interfaces , 1986 .