A Single‐Step Dual Stabilization of Smart Window by the Formation of Liquid Crystal Physical Gels and the Construction of Liquid Crystal Chambers

Smart windows are very attractive because they not only provide comfortable indoor conditions for cars and buildings, but also protect privacy. However, current smart windows have problems such as high energy consumption, slow response time, and poor stability. To solve these problems, a single‐step dual stabilization (SSDS) is newly proposed for the fabrication of robust liquid crystal (LC) smart windows switching fast at low voltage. Upon irradiating ultraviolet light on the selected area of the nematic (N) LC optical cell with photoisomerizable macrogelators (B3AZ) and photopolymerizable monomers, NLC physical gels (LCPGs) and partition walls are simultaneously constructed. LCPGs play a role of light shutter under a low electric field (9.6 Vpp) which is ten times lower than that of the conventional polymer‐stabilized LC‐based smart windows. Partition walls constructed by the selected area photopolymerization significantly enhance the mechanical stabilities. Based on the experimental results, it is realized that the NLC layer generated near the partition walls makes the LCPGs respond to a low voltage. Robust SSDS smart windows could open new doors for the development of high‐performance smart windows.

[1]  Cheul‐Ro Lee,et al.  Stimuli-responsive liquid crystal physical gels based on the hierarchical superstructures of benzene-1,3,5-tricarboxamide macrogelators , 2017 .

[2]  N. Bidin,et al.  Liquid crystal physical gel formed by cholesteryl stearate for light scattering display material. , 2016, Journal of colloid and interface science.

[3]  S. Kuo,et al.  Self-Assembled Hierarchical Superstructures from the Benzene-1,3,5-Tricarboxamide Supramolecules for the Fabrication of Remote-Controllable Actuating and Rewritable Films. , 2016, ACS applied materials & interfaces.

[4]  Yubao Sun,et al.  The optical threshold and saturation voltage of blue-phase liquid crystal display with uniform operating electric field , 2015 .

[5]  Shu Yang,et al.  A Robust Smart Window: Reversibly Switching from High Transparency to Angle‐Independent Structural Color Display , 2015, Advanced materials.

[6]  Jin-Woo Park,et al.  Supramolecular gels with high strength by tuning of calix[4]arene-derived networks , 2015, Nature Communications.

[7]  Hong-Gyu Park,et al.  Homogeneous self-aligned liquid crystals on wrinkled-wall poly(dimethylsiloxane) via localised ion-beam irradiation , 2015, Scientific Reports.

[8]  H. Kihara,et al.  Dual self-healing abilities of composite gels consisting of polymer-brush-afforded particles and an azobenzene-doped liquid crystal. , 2015, ACS applied materials & interfaces.

[9]  Nasser Mohieddin Abukhdeir,et al.  Silver nanowire transparent electrodes for liquid crystal-based smart windows , 2015 .

[10]  Ko-Ting Cheng,et al.  Isothermal electrically and optically induced phase separation of liquid crystal and poly(N-vinylcarbazole) films. , 2014, Optics express.

[11]  J. Lehn,et al.  A light-induced reversible phase separation and its coupling to a dynamic library of imines , 2014 .

[12]  Youyong Li,et al.  Novel polymer-free iridescent lamellar hydrogel for two-dimensional confined growth of ultrathin gold membranes , 2014, Nature Communications.

[13]  Feihe Huang,et al.  Characterization of supramolecular gels. , 2013, Chemical Society reviews.

[14]  R. Deshmukh,et al.  Effect of Nematic Liquid Crystals on Optical Properties of Solvent Induced Phase Separated PDLC Composite Films , 2012 .

[15]  Yi-Hsin Lin,et al.  A polarization-independent liquid crystal phase modulation using polymer-network liquid crystals in a 90° twisted cell , 2012 .

[16]  T. Yoon,et al.  Formation of Dual Threshold in a Vertical Alignment Liquid Crystal Device , 2012 .

[17]  J. M. Romero-Enrique,et al.  Generalized Berreman's model of the elastic surface free energy of a nematic liquid crystal on a sawtoothed substrate. , 2012, Physical review. E, Statistical, nonlinear, and soft matter physics.

[18]  S. K. Prasad,et al.  Anomalously large bend elastic constant and faster electro-optic response in anisotropic gels formed by a dipeptide , 2011 .

[19]  Takashi Kato,et al.  Electro- and Photoactive Molecular Assemblies of Liquid Crystals and Physical Gels , 2009 .

[20]  S. Hwang.  Characterisation of polymer wall formation in nematic liquid crystal devices , 2008 .

[21]  Takashi Kato,et al.  Liquid-crystalline physical gels. , 2007, Chemical Society reviews.

[22]  T. Yoon,et al.  Initially π-twisted nematic liquid crystal cell stabilized by a fluorinated polymer wall , 2007 .

[23]  K. Hanabusa,et al.  STN-gels in fast passive matrix displays , 2004 .

[24]  J. Reynolds,et al.  The First Truly All‐Polymer Electrochromic Devices , 2003 .

[25]  C. Lampert.  Large-Area Smart Glass And Integrated Photovoltaics , 2003 .

[26]  Takashi Kato.  Self-Assembly of Phase-Segregated Liquid Crystal Structures , 2002, Science.

[27]  W. Kuczyński,et al.  Determination of Orientational Order Parameter in Various Liquid-Crystalline Phases , 2002 .

[28]  N. Clark,et al.  Alignment of liquid crystals with patterned isotropic surfaces. , 2001, Science.

[29]  K. Hanabusa,et al.  Nematic liquid-crystalline physical gels exhibiting faster responses to electric fields in twisted nematic cells , 2001 .

[30]  Hari Singh Nalwa,et al.  Handbook of advanced electronic and photonic materials and devices , 2001 .

[31]  C. Lampert.  Smart switchable glazing for solar energy and daylight control , 1998 .

[32]  I. Sage,et al.  Voltage-dependent anchoring of a nematic liquid crystal on a grating surface , 1998, Nature.

[33]  F. Touwslager,et al.  Polymerization-Induced Phase Separation. 1. Conversion−Phase Diagrams , 1996 .

[34]  G. Sotzing,et al.  Rapid switching solid state electrochromic devices based on complementary conducting polymer films , 1996 .

[35]  H. Kwok.  Parameter space representation of liquid crystal display operating modes , 1996 .

[36]  Kim,et al.  Polymerization-induced phase separation in a liquid-crystal-polymer mixture. , 1993, Physical review letters.

[37]  Liang-Chy Chien,et al.  Cholesteric liquid crystal/polymer dispersion for haze‐free light shutters , 1992 .

[38]  J. W. Doane,et al.  Polymer dispersed liquid crystals for display application , 1988 .

[39]  J. S. Patel,et al.  The mechanism of polymer alignment of liquid‐crystal materials , 1987 .

[40]  G. Montgomery,et al.  A Light Control Film Composed of Liquid Crystal Droplets Dispersed in an Epoxy Matrix , 1987 .

[41]  G. Montgomery,et al.  Contrast ratios of polymer-dispersed liquid crystal films. , 1987, Applied optics.

[42]  P. Drzaic.  Polymer dispersed nematic liquid crystal for large area displays and light valves , 1986 .

[43]  J. W. Doane,et al.  Field controlled light scattering from nematic microdroplets , 1986 .

[44]  Meyer,et al.  Light-scattering study of a polymer nematic liquid crystal. , 1985, Physical review letters.

[45]  S. Hackwood,et al.  New display based on electrically induced index‐matching in an inhomogeneous medium , 1982 .

[46]  D. Dunmur.  Electro-Optical Properties of Liquid Crystals , 1981 .

[47]  N. Clark,et al.  Light-Scattering Study of Two-Dimensional Molecular-Orientation Fluctuations in a Freely Suspended Ferroelectric Liquid-Crystal Film , 1978 .

[48]  D. W. Berreman,et al.  Elastic continuum theory cutoffs and order in nematics and solids , 1975 .

[49]  W. L. Mcmillan.  Molecular Order and Molecular Theories of Liquid Crystals , 1974 .

[50]  W. Greubel,et al.  The Homogeneous Alignment of Liquid Crystal Layers , 1973 .