A stand-alone renewable wind-photovoltaic energy system can be used to meet the energy requirements of off-grid remote area applications. Such a system has been developed and successfully tested at the Hydrogen Research Institute (HRI). In the HRFs system the excess electrical energy with respect to load demand, is transformed and stored as hydrogen gas via an electrolyzer. The stored hydrogen represents a long-term ecological and transportable form of energy. The renewable energy (RE) system components have substantially different voltage-current characteristics and their operation must be well understood and coordinated to allow an optimal power management in the system. Wind turbine generator, DC-DC buck converter and electrolyzer play key roles in the hydrogen production process. Accurate knowing of operating characteristics of these components is necessary to develop an effective power flow control for the hydrogen production. This paper investigates operational characteristics of the wind turbine, the electrolyzer and the buck converter in order to develop an energy management strategy that will increase the hydrogen production efficiency in the RE system. Wind turbine model is developed and simulation results are compared with experimental measurements. The electrolyzer is characterized and its optimal operating range is defined. The multiphase control principle of the designed buck converter is presented and the efficiency curve is provided. An energy management strategy is proposed to increase the overall efficiency of the hydrogen production process.
[1]
François Audet,et al.
MÉMOIRE PRÉSENTÉ À L'UNIVERSITÉ DU QUÉBEC À TROIS-RIVIÈRES
,
1999
.
[2]
K. Agbossou,et al.
Energy management of hydrogen-based stand-alone renewable energy system by using boost and buck converters
,
2004,
Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..
[3]
H. Schmitz,et al.
Theoretical analysis and evaluation of the operating data of a bipolar water electrolyser
,
1994
.
[4]
W Hug,et al.
Intermittent operation and operation modeling of an alkaline electrolyzer
,
1993
.
[5]
Jay O. Keller,et al.
Hybrid energy storage systems for stand-alone electric power systems: optimization of system performance and cost through control strategies
,
1999
.
[6]
K. Agbossou,et al.
Renewable energy systems based on hydrogen for remote applications
,
2001
.
[7]
S. Srinivasan,et al.
Recent advances in solid polymer electrolyte fuel cell technology with low platinum loading electrodes
,
1989,
Proceedings of the 24th Intersociety Energy Conversion Engineering Conference.
[8]
R. Henne,et al.
Intermittently operated 10-kW alkaline water electrolyzer of advanced technology.
,
1996
.
[9]
H. Barthels,et al.
Phoebus-Jülich: An autonomous energy supply system comprising photovoltaics, electrolytic hydrogen, fuel cell
,
1998
.
[10]
K. Agbossou,et al.
Characterization of a Ballard MK5-E Proton Exchange Membrane Fuel Cell Stack
,
2001
.