Advances in application potential of adsorptive-type solid state gas sensors: high-temperature semiconducting oxides and ambient temperature GasFET devices

This paper reviews some scientific considerations about the underlying material properties and the detailed functional principle of two important types of solid state gas sensors. This is used to predict the application potential of these sensor technologies. The classical methodology to use resistance readout of heated semiconducting metal oxides is a straightforward approach to get robust sensors that are simple in design. The usage of materials that are operated at higher temperatures opens up the way for improvements; due to a change in the mechanism of electrical conductivity, better reproducibility and stability of the electrical properties can be attained. The high operation temperatures also lead to changes in the surface reactions with the gases that allow for quicker equilibration times. The next step is taken when devices are used that are based on the readout of the work function of the sensing materials. Suspended gate FETs here serve as the transducer structures. Surface properties are directly used here, which facilitates the preparation of sensing materials. The sensors can be used with a wide range of sensing materials, allowing the development of receptor materials that optimally fit the target gases. Functional improvements include enhanced selectivity and detection of a wider range of gases. These devices may work at room temperature with little energy required for running them and additionally allow direct access to the structure of the analyte molecule without thermal decomposition.

[1]  H. Meixner,et al.  Electron mobility in single- and polycrystalline Ga2O3 , 1993 .

[2]  T. Seiyama,et al.  A New Detector for Gaseous Components Using Semiconductive Thin Films. , 1962 .

[3]  H. Meixner,et al.  High‐Temperature Hall Measurements on BaSnO3Ceramics , 2005 .

[4]  H. Meixner,et al.  Thin films for gas sensors in new application fields — MBRS studies and semiempirical calculations , 1999 .

[5]  H.-P. Frerichs,et al.  Fire detection with low power fet gas sensors , 2007 .

[6]  R. Pohle,et al.  Realization of a new sensor concept: improved CCFET and SGFET type gas sensors in Hybrid Flip-Chip technology , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[7]  Maximilian Fleischer,et al.  Gallium oxide thin films: A new material for high-temperature oxygen sensors , 1991 .

[8]  Dieter Kohl,et al.  Function and applications of gas sensors , 2001 .

[9]  H. Meixner,et al.  H2-induced changes in electrical conductance of β-Ga2O3 thin-film systems , 1992 .

[10]  Maximilian Fleischer,et al.  Sensing reducing gases at high temperatures using long-term stable Ga2O3 thin films , 1992 .

[11]  P. Kornetzky,et al.  The capacitively controlled field effect transistor (CCFET) as a new low power gas sensor , 1996 .

[12]  N. Bârsan,et al.  Conduction Model of Metal Oxide Gas Sensors , 2001 .

[13]  Theodor Doll,et al.  Adsorbed water as key to room temperature gas-sensitive reactions in work function type sensors: the carbonate–carbon dioxide system , 1999 .

[14]  Theodor Doll,et al.  Reliable hybrid GasFETs for work-function measurements with arbitrary materials , 1994 .

[15]  C. Svensson,et al.  A hydrogen-sensitive Pd-gate MOS transistor , 1975 .

[16]  J. Janata,et al.  Temperature-controlled Kelvin microprobe , 1993 .

[17]  Joachim Frank,et al.  High temperature Ga2O3-gas sensors and SnO2-gas sensors: a comparison , 2001 .

[18]  R. Pohle,et al.  In situ infrared emission spectroscopic study of the adsorption of H2O and hydrogen-containing gases on Ga2O3 gas sensors , 2000 .

[19]  Udo Weimar,et al.  Copper phthalocyanine suspended gate field effect transistors for NO2 detection , 2006 .

[20]  U. Lampe,et al.  New Materials for Metal Oxide Sensors , 1996 .

[21]  Maximilian Fleischer,et al.  TiN in work function type sensors: a stable ammonia sensitive material for room temperature operation with low humidity cross sensitivity , 2000 .

[22]  P. Bergveld.  The impact of MOSFET-based sensors , 1985 .

[23]  Uwe Lampe,et al.  GasFET for the detection of reducing gases , 2005 .

[24]  U. Weimar,et al.  Detection of volatile compounds correlated to human diseases through breath analysis with chemical sensors , 2002 .

[25]  M. Fleischer,et al.  Stability of semiconducting gallium oxide thin films , 1990 .

[26]  Uwe Lampe,et al.  Lambda measurement with Ga2O3 , 1994 .

[27]  H. Meixner,et al.  In situ Hall measurements at temperatures up to 1100 degrees C with selectable gas atmospheres , 1994 .

[28]  H. Meixner,et al.  A selective H2 sensor implemented using Ga2O3 thin-films which are covered with a gas-filtering SiO2 layer , 1996 .

[29]  B. Flietner,et al.  Evaluation of gas mixtures with different sensitive layers incorporated in hybrid FET structures , 1994 .

[30]  Roland Pohle,et al.  Low-power gas sensors based on work-function measurement in low-cost hybrid flip-chip technology , 2001 .

[31]  E. Logothetis,et al.  Chemical and physical sensors based on oxygen pumping with solid-state electrochemical cells , 1992 .

[32]  K. Besocke,et al.  Piezoelectric driven Kelvin probe for contact potential difference studies , 1976 .

[33]  J. Giber,et al.  Auger and SIMS study of segregation and corrosion behaviour of some semiconducting oxide gas-sensor materials , 1994 .

[34]  R. Hancox,et al.  The predictive value of exhaled nitric oxide measurements in assessing changes in asthma control. , 2001, American journal of respiratory and critical care medicine.

[35]  U. Lampe,et al.  Chemosensors for motor management systems of the future , 1994 .