DESIGN OF A SHAPE MEMORY ACTUATED GASTROINTESTINAL INTERVENTION SYSTEM

This paper describes the design of a prototype gastrointestinal intervention system based on an inchworm-type of mobile robot. The overall system is about 95 mm long and has a diameter of 15 mm. The modular design has three main parts: an extension and contraction part, a two degree of freedom bending part and a locking part. All these parts are to be actuated by shape memory elements. Main part of the paper will concern a modular actuator for realising bending motion. The design can be compared to a single vertebra, where a spinal column can be formed by stacking several elements. This design greatly facilitates the control as each element is controlled in a binary mode. The design takes into consideration the electromechanical interconnection of the different parts.

[1]  K. Ikuta,et al.  The Application Of Micro/miniature Mechatronics Abstract Medical Robotics , 2002, IEEE International Workshop on Intelligent Robots.

[2]  H. Brussel,et al.  Production of shape memory alloys for microactuation , 1994 .

[3]  Kazuhiro Kosuge,et al.  Micro active catheter system with multi degrees of freedom , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[4]  H. Brussel,et al.  Shape memory alloy based electrical actuation for robotic applications , 1994 .

[5]  Koji Ikuta,et al.  Shape memory alloy servo actuator system with electric resistance feedback and application for active endoscope , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[6]  Paolo Dario,et al.  Shape memory alloy microactuators , 1990 .