Development of a methodology for the formation of surface systems with programmable nanostructure parameters for effective use in modern manufacturing

The paper discusses the development and application of nanostructured surface systems for a wide range of applications. By programming the parameters of the CAA-PVD (Controled Accelerated Arc-PVD) Deposition process, it becomes possible to effectively control the performance properties of surface modifying systems and products with such systems. Modification of the surface properties of products such as cutting tools, friction pairs and medical implants provides an optimal combination of properties such as surface hardness and plasticity, high adhesion to the substrate and low adhesion to the counterbody material. The strict determinism of the process parameters allows it to be included in the automatic control system of modern manufacturing with significant energy savings and a high level of environmental safety.

[1]  Y. Melnik,et al.  Characteristics of a fast neutral atom source with electrons injected into the source through its emissive grid from the vacuum chamber , 2012 .

[2]  Noureddine Zerhouni,et al.  A feature extraction procedure based on trigonometric functions and cumulative descriptors to enhance prognostics modeling , 2013, 2013 IEEE Conference on Prognostics and Health Management (PHM).

[3]  A. Vereschaka.  Improvement of Working Efficiency of Cutting Tools by Modifying its Surface Properties by Application of Wear-Resistant Complexes , 2013 .

[4]  A. Vereschaka,et al.  Influence of nanolayer thickness on the performance properties of multilayer composite nano-structured modified coatings for metal-cutting tools , 2018 .

[5]  S. Veldhuis,et al.  Effect of mechanical properties measured at room and elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatings , 2006 .

[6]  E. A. Ostrikov,et al.  Use of laser ablation for formation of discontinuous (discrete) wear-resistant coatings formed on solid carbide cutting tool by electron beam alloying and vacuum-arc deposition , 2016 .

[7]  A. Vereschaka,et al.  Study of Properties of Nanostructured Multilayer Composite Coatings of Ti-TiN-(TiCrAl)N and Zr-ZrN-(ZrNbCrAl)N , 2016 .

[8]  Bing Wang,et al.  Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools , 2018, Materials.

[9]  J. Seely,et al.  Metal vapor vacuum arc ion source , 1986 .

[10]  V. Braic,et al.  Nanostructured multi-element (TiZrNbHfTa)N and (TiZrNbHfTa)C hard coatings , 2012 .

[11]  O. Lemmer,et al.  The development of the PVD coating TiAlN as a commercial coating for cutting tools , 1991 .

[12]  B. Rauschenbach,et al.  Synthesis of metal nitrides by low-energy ion assisted film growth , 2001 .

[13]  S. Veldhuis,et al.  Impact of Al and Cr alloying in TiN-based PVD coatings on cutting performance during machining of hard to cut materials , 2009 .

[14]  S. Goldsmith,et al.  Principles and applications of vacuum arc coatings , 1989 .

[15]  V. B. Romanov,et al.  Prediction and Measurement of the Parameters of the Microtopography of a Surface When Turning Intricately Shaped Parts , 2015 .

[16]  S. N. Grigoriev,et al.  Research and Development of a Cross-platform CNC Kernel for Multi-axis Machine Tool☆ , 2014 .

[17]  Erich Bergmann,et al.  Hard coatings by plasma-assisted PVD technologies: Industrial practice , 1989 .

[18]  Konstantinos-Dionysios Bouzakis,et al.  Cutting with coated tools: Coating technologies, characterization methods and performance optimization , 2012 .

[19]  R. Hollinger,et al.  Progress on MEVVA source VARIS at GSI. , 2018, The Review of scientific instruments.

[20]  M. A. Volosova,et al.  The role of the thermal factor in the wear mechanism of ceramic tools: Part 1. Macrolevel , 2014 .

[21]  Junxue Ren,et al.  Effect of cutter path orientations on cutting forces, tool wear, and surface integrity when ball end milling TC17 , 2017 .

[22]  S. Grigoriev,et al.  Investigation of wear mechanisms for the rake face of a cutting tool with a multilayer composite nanostructured Cr–CrN-(Ti,Cr,Al,Si)N coating in high-speed steel turning , 2019, Wear.

[23]  Hwa Jen Yap,et al.  Technical data-driven tool condition monitoring challenges for CNC milling: a review , 2020 .

[24]  H. Jehn.  Multicomponent and multiphase hard coatings for tribological applications , 2000 .

[25]  P. Chalker,et al.  A review of the methods for the evaluation of coating-substrate adhesion , 1991 .

[26]  S. Grigoriev,et al.  Investigation of wear dynamics for cutting tools with multilayer composite nanostructured coatings in turning constructional steel , 2019, Wear.

[27]  Sergey N. Grigoriev,et al.  Control of parameters of the cutting process on the basis of diagnostics of the machine tool and workpiece , 2012 .

[28]  Sergey N. Grigoriev,et al.  Diagnostic Systems as Basis for Technological Improvement , 2012 .

[29]  S. Grigoriev,et al.  Development of DLC-Coated Solid SiAlON/TiN Ceramic End Mills for Nickel Alloy Machining: Problems and Prospects , 2021, Coatings.

[30]  Biqing Huang,et al.  Approach for fault prognosis using recurrent neural network , 2018, J. Intell. Manuf..

[31]  Petr M. Pivkin,et al.  A new method for the precise determination of rational geometric parameters of the helical groove and cutting part of high-performance tri-flute , 2020, Security + Defence.

[32]  A. S. Vereshchaka,et al.  Ecologically Friendly Dry Machining by Cutting Tool from Layered Composition Ceramic with Nano-Scale Multilayered Coatings , 2011 .

[33]  S. Grigoriev,et al.  Improving the Efficiency of the Cutting Tools Made of Mixed Ceramics by Applying Modifying Nanoscale Multilayered Coatings , 2013 .

[34]  S. N. Grigoriev,et al.  Comparative analysis of cutting properties and nature of wear of carbide cutting tools with multi-layered nano-structured and gradient coatings produced by using of various deposition methods , 2017 .

[35]  S. Falabella,et al.  Coating technology based on the vacuum arc-a review , 1990 .

[36]  I. Yadroitsev,et al.  Use of track/layer morphology to develop functional parts by selective laser melting , 2013 .

[37]  A. Batako,et al.  Nano-scale multi-layered coatings for improved efficiency of ceramic cutting tools , 2017 .

[38]  Chengyong Wang,et al.  Microstructure and properties of TiAlSiN coatings prepared by hybrid PVD technology , 2009 .

[39]  Yin-Yu Chang,et al.  Deposition of Multicomponent AlTiCrMoN Protective Coatings for Metal Cutting Applications , 2020 .

[40]  A. Perry,et al.  The Architecture and Performance of Compositionally Gradient and Multi-Layer PVD Coatings , 1994 .

[41]  Sergey N. Grigoriev,et al.  Development of residual cutting tool life prediction algorithm by processing on CNC machine tool , 2013 .

[42]  Fritz Klocke,et al.  Coated Tools for Metal Cutting – Features and Applications , 1999 .

[43]  Chengyong Wang,et al.  Physical vapor deposition technology for coated cutting tools: A review , 2020 .

[44]  A. Vereschaka,et al.  Control of Structure and Properties of Nanostructured Multilayer Composite Coatings Applied to Cutting Tools as a Way to Improve Efficiency of Technological Cutting Operations , 2015 .

[45]  A. S. Vereshchaka,et al.  Study of wear mechanism of hard-alloy tools during machining of refractory alloys , 2013 .

[46]  Sergey N. Grigoriev,et al.  A new method for modeling edges of a toroidal cutting surface of solid ceramic end mills , 2020, Security + Defence.

[47]  S. Goldsmith,et al.  Macroparticle contamination in cathodic arc coatings: generation, transport and control☆ , 1992 .

[48]  K. Bouzakis,et al.  Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts , 2014 .

[49]  S. N. Grigoriev,et al.  The Control Platform for Decomposition and Synthesis of Specialized CNC Systems , 2016 .

[50]  S. Grigoriev,et al.  Investigation of wear and diffusion processes on rake faces of carbide inserts with Ti-TiN-(Ti,Al,Si)N composite nanostructured coating , 2018, Wear.

[51]  J. Endrino,et al.  Modern coatings in high performance cutting applications , 2006 .

[52]  D. Kramar,et al.  Wear behavior and cutting performance of nanostructured hard coatings on cemented carbide cutting tools in hard milling , 2013 .

[53]  Y. Melnik,et al.  Broad beam source of fast atoms produced as a result of charge exchange collisions of ions accelerated between two plasmas , 2009 .

[54]  S. Jianzhong,et al.  Industrialization of MEVVA source ion implantation , 2000 .

[55]  A. Vereschaka.  Development of Assisted Filtered Cathodic Vacuum Arc Deposition of Nano-Dispersed Multi-Layered Composite Coatings on Cutting Tools , 2013 .

[56]  Viacheslav V. Voronin,et al.  Algorithm for image stitching in the infrared , 2019, Defense + Commercial Sensing.

[57]  S. Grigoriev,et al.  The Role of Thin-Film Vacuum-Plasma Coatings and Their Influence on the Efficiency of Ceramic Cutting Inserts , 2018, Coatings.

[58]  Fan Yang,et al.  The future of biologic coatings for orthopaedic implants. , 2013, Biomaterials.

[59]  S. N. Grigoriev,et al.  An ARM-based Multi-channel CNC Solution for Multi-tasking Turning and Milling Machines☆ , 2016 .