Silicon carbide power devices - status and upcoming challenges

The paper will give an overview of the status of SiC power devices with a focus on commercial, non- military applications. Besides the use in power supplies SiC was able to enter the drives market too. This was possible because of considerable progress in devices power rating, making it possible to implement these chips in modules. Performance and cost issues will be mentioned in order to explain why the SiC market is growing more slowly than numerous market analyses may suggest. However, it will be shown that the position of SiC in power electronics is manifested. For the further penetration of these components into applications the use of efficiency advantages given by the use of SiC components will be worked out as an important argument for justifying the higher device costs. The current version of commercially available diodes will be mentioned as well as an insight into the field of SiC power switches. A special focus will be given to the question of a right concept, topics like MOSFET and JFET as well as normally on and normally off will be addressed. Pro's and cons of switches as well as the field of high voltage SiC devices will be highlighted in the final paragraphs as well as a short guide to decide whether the use of SiC components should be considered or not in certain applications.

[1]  R. Rupp,et al.  2nd generation 600V SiC Schottky diodes use merged pn/Schottky structure for surge overload protection , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[2]  A. Agarwal,et al.  10-kV, 123-mOcm2 4H-SiC power DMOSFETs , 2004 .

[3]  A. Agarwal,et al.  10-kV, 123-m/spl Omega//spl middot/cm/sup 2/ 4H-SiC power DMOSFETs , 2004, IEEE Electron Device Letters.

[4]  J.M. Ortiz-Rodriguez,et al.  High-Voltage, High-Frequency SiC Power MOSFETs Model Validation , 2007, 2007 IEEE Power Electronics Specialists Conference.

[5]  O. W. Holland,et al.  Improved inversion channel mobility for 4H-SiC MOSFETs following high temperature anneals in nitric oxide , 2001, IEEE Electron Device Letters.

[6]  Peter Friedrichs,et al.  Comparison of 4H-SiC pn, Pinch and Schottky Diodes for the 3 kV Range , 2002 .

[7]  J. Kolar,et al.  A SiC JFET driver for a 5 kW, 150 kHz three-phase PWM converter , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[8]  Bernd Eckardt,et al.  Automotive Powertrain DC/DC Converter with 25kW/dm(exp3) by using SiC Diodes , 2006 .

[9]  J.W. Kolar,et al.  Towards a 30 kW/liter, Three-Phase Unity Power Factor Rectifier , 2007, 2007 Power Conversion Conference - Nagoya.

[10]  M. Treu,et al.  Reliability of SiC Power Devices Against Cosmic Radiation-Induced Failure , 2007 .

[11]  Michael S. Mazzola,et al.  Assessment of "Normally On" and "Quasi On" SiC VJFET's in Half-Bridge Circuits , 2004 .

[12]  W. Bartsch,et al.  SiC-Powerdiodes: Design and performance , 2007, 2007 European Conference on Power Electronics and Applications.

[13]  H. Mitlehner,et al.  Bipolar SiC-Diodes – Challenges Arising from Physical and Technological Aspects , 2007 .

[14]  P. Friedrichs,et al.  Static and Dynamic Characteristics of 4H-SiC JFETs Designed for Different Blocking Categories , 2000 .

[15]  C. Carter,et al.  A Theoretical and Empirical Perspective of SiC Bulk Growth , 1998 .

[16]  C. Scozzie,et al.  Evolution of the 1600 V, 20 A, SiC Bipolar Junction Transistors , 2005, Proceedings. ISPSD '05. The 17th International Symposium on Power Semiconductor Devices and ICs, 2005..

[17]  H. Mantooth,et al.  High-temperature silicon carbide (SiC) power switches in multichip power module (MCPM) applications , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[18]  Anant K. Agarwal,et al.  4H-SiC DMOSFETs for High Speed Switching Applications , 2005 .

[19]  H. Lendenmann,et al.  Transmission electron microscopy investigation of dislocations in forward-biased 4H-SiC p–i–n diodes , 2003 .