Performance investigation of integrated thermal management system based on a pumped two-phase cooling system for electric vehicles

[1]  M. Fowler,et al.  Thermal Modelling Utilizing Multiple Experimentally Measurable Parameters , 2022, Batteries.

[2]  M. Fowler,et al.  A novel heat dissipation structure based on flat heat pipe for battery thermal management system , 2022, International Journal of Energy Research.

[3]  Yidong Fang,et al.  Experimental investigation on flow boiling characteristics of R1233zd(E) in a parallel mini-channel heat sink for the application in battery thermal management , 2021 .

[4]  Alireza Mahdavi Nejad,et al.  Lithium-ion battery thermal management system with Al2O3/AgO/CuO nanofluids and phase change material , 2020, Applied Thermal Engineering.

[5]  Xiaosong Hu,et al.  An improved resistance-based thermal model for prismatic lithium-ion battery charging , 2020 .

[6]  Joeri Van Mierlo,et al.  A comprehensive review of future thermal management systems for battery-electrified vehicles , 2020 .

[7]  Yidong Fang,et al.  Experimental investigation on system performances and transient response of a pumped two-phase battery cooling system using R1233zd , 2020, Energy Reports.

[8]  Y. Li,et al.  Multilayer electrochemical-thermal coupled modeling of unbalanced discharging in a serially connected lithium-ion battery module , 2020 .

[9]  Seong-ho Hong,et al.  Thermal performance of direct two-phase refrigerant cooling for lithium-ion batteries in electric vehicles , 2020, Applied Thermal Engineering.

[10]  Shuofeng Wang,et al.  Study of non-uniform temperature and discharging distribution for lithium-ion battery modules in series and parallel connection , 2020, Applied Thermal Engineering.

[11]  Yan-Feng Wang,et al.  Thermal performance predictions for an HFE-7000 direct flow boiling cooled battery thermal management system for electric vehicles , 2020 .

[12]  Akhil Garg,et al.  A comprehensive analysis and optimization process for an integrated liquid cooling plate for a prismatic lithium-ion battery module , 2019, Applied Thermal Engineering.

[13]  Lin Yang,et al.  Investigation on an integrated thermal management system with battery cooling and motor waste heat recovery for electric vehicle , 2018 .

[14]  Sanghun Kim,et al.  Predictive control of car refrigeration cycle with an electric compressor , 2017 .

[15]  Jiyun Zhao,et al.  Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review , 2017 .

[16]  Li Jia,et al.  Experimental investigation on lithium-ion battery thermal management based on flow boiling in mini-channel , 2017 .

[17]  Andrew McGordon,et al.  Electrochemical modelling of Li-ion battery pack with constant voltage cycling , 2017 .

[18]  Zhonghao Rao,et al.  Investigation of phase change material based battery thermal management at cold temperature using lattice Boltzmann method , 2017 .

[19]  Xiongwen Zhang,et al.  Unbalanced discharging and aging due to temperature differences among the cells in a lithium-ion battery pack with parallel combination , 2016 .

[20]  Sebastian Paul,et al.  Analysis of ageing inhomogeneities in lithium-ion battery systems , 2013 .

[21]  Ibrahim Dincer,et al.  Exergy analysis of a TMS (thermal management system) for range-extended EVs (electric vehicles) , 2012 .

[22]  Dinh Vinh Do,et al.  Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery , 2010 .

[23]  M. Shah.  A general correlation for heat transfer during film condensation inside pipes , 1979 .

[24]  Qing Gao,et al.  System simulation on refrigerant-based battery thermal management technology for electric vehicles , 2020 .

[25]  J. Taborek,et al.  Flow Boiling Heat Transfer in Vertical Tubes Correlated by an Asymptotic Model , 1992 .