One-step solution synthesis of bismuth sulfide (Bi2S3) with various hierarchical architectures and their photoresponse properties

In this paper, we introduce a facile and phosphine-free one-step solution method to synthesize size- and shape-controlled bismuth sulfide (Bi2S3) with hierarchical architectures. Changing variables, such as the reaction temperature, the ratio of precursors, and the concentration of oleic acid were observed to influence the resultant shape of Bi2S3 microstructures. For the formation of Bi2S3 hierarchical architectures, the crystal splitting growth mechanism played the dominant role. The absorption spectra were recorded at room temperature, which revealed that the obtained Bi2S3 product was a direct band gap semiconductor and the band gap Eg was estimated to be about 1.9 eV. Furthermore, the I–V characteristics of the Bi2S3-based device show a significant increase by ca. 1 order of magnitude compared with the dark state, indicating an enhanced conductivity and high sensitivity. The response and decay times are estimated to be about 0.5 and 0.8 s, respectively, which are short enough for it to be an excellent candidate for high-speed and high-sensitivity photodetectors or optical switches. Thus the Bi2S3 hierarchies as building blocks may offer the potential for monolithic, low-cost and large-scale integration with CMOS electronics.

[1]  Lianmao Peng,et al.  Individual Bi2S3 Nanowire-Based Room-Temperature H2 Sensor , 2008 .

[2]  P. O’Brien,et al.  Deposition of bismuth chalcogenide thin films using novel single-source precursors by metal-organic chemical vapor deposition , 2004 .

[3]  Yanping Yuan,et al.  Self-assembled heavy lanthanide orthovanadate architecture with controlled dimensionality and morphology. , 2009, Chemistry.

[4]  E. Tiekink,et al.  Growth of bismuth sulfide nanowire using bismuth trisxanthate single source precursors , 2003 .

[5]  Chang Ming Li,et al.  Synthesis of a highly ordered single-crystalline Bi2S3 nanowire array and its metal/semiconductor/metal back-to-back Schottky diode. , 2008, Small.

[6]  S. T. Lee,et al.  Photoconductive characteristics of single-crystal CdS nanoribbons. , 2006, Nano letters.

[7]  Henghui Zhou,et al.  Topotactic Transformation of Single‐Crystalline Precursor Discs into Disc‐Like Bi2S3 Nanorod Networks , 2008 .

[8]  M. Zeller,et al.  Photoelectrochemical and photoresponsive properties of Bi2S3 nanotube and nanoparticle thin films , 2010 .

[9]  Feng Gao,et al.  Biomolecule-assisted synthesis of highly ordered snowflakelike structures of bismuth sulfide nanorods. , 2004, Journal of the American Chemical Society.

[10]  Xinggui Zhou,et al.  Bi2S3 nanostructures: A new photocatalyst , 2010 .

[11]  M. Salavati‐Niasari,et al.  Synthesis of different morphologies of bismuth sulfide nanostructures via hydrothermal process in the presence of thioglycolic acid , 2009 .

[12]  Peidong Yang,et al.  Nanowire ultraviolet photodetectors and optical switches , 2002 .

[13]  Chang Ming Li,et al.  Photoswitchable Semiconductor Bismuth Sulfide (Bi2S3) Nanowires and Their Self-Supported Nanowire Arrays , 2007 .

[14]  N. Pradhan,et al.  Crystalline nanoflowers with different chemical compositions and physical properties grown by limited ligand protection. , 2006, Angewandte Chemie.

[15]  Xiaochuan Duan,et al.  Ionic liquids-assisted synthesis and electrochemical properties of Bi2S3 nanostructures , 2011 .

[16]  Ling-Dong Sun,et al.  Low‐Temperature Fabrication of Highly Crystalline SnO2 Nanorods , 2003 .

[17]  Christopher B. Murray,et al.  Synthesis and Characterization of Monodisperse Nanocrystals and Close-Packed Nanocrystal Assemblies , 2000 .

[18]  Hongyuan Chen,et al.  Sonochemical Method for the Preparation of Bismuth Sulfide Nanorods , 2002 .

[19]  Charles M. Lieber,et al.  Directed assembly of one-dimensional nanostructures into functional networks. , 2001, Science.

[20]  Z. Wang,et al.  Transmission Electron Microscopy of Shape-Controlled Nanocrystals and Their Assemblies , 2000 .

[21]  R. Cao,et al.  Template Synthesis of Hierarchical Bi2E3 (E ) S, Se, Te) Core-Shell Microspheres and Their Electrochemical and Photoresponsive Properties , 2009 .

[22]  Anders Hagfeldt,et al.  Light-Induced Redox Reactions in Nanocrystalline Systems , 1995 .

[23]  Jan Grimm,et al.  An X-ray computed tomography imaging agent based on long-circulating bismuth sulphide nanoparticles , 2006, Nature materials.

[24]  C. Cao,et al.  Photoresponse and Field-Emission Properties of Bismuth Sulfide Nanoflowers , 2008 .

[25]  Edward H. Sargent,et al.  Sensitive solution-processed Bi2S3 nanocrystalline photodetectors. , 2008, Nano letters.

[26]  Zhengshui Hu,et al.  Morphology-controlled synthesis of Bi2S3 microstructures , 2011 .

[27]  Yan Li,et al.  Inorganic hierarchical nanostructures induced by concentration difference and gradient , 2008 .

[28]  Yitai Qian,et al.  Large‐Scale Synthesis of Ultralong Bi2S3 Nanoribbons via a Solvothermal Process , 2003 .

[29]  L. Cademartiri,et al.  Large-scale synthesis of ultrathin Bi2S3 necklace nanowires. , 2008, Angewandte Chemie.

[30]  A. Mieszawska,et al.  The synthesis and fabrication of one-dimensional nanoscale heterojunctions. , 2007, Small.

[31]  D. P. Grigorʹev,et al.  Ontogeny of minerals , 1965 .

[32]  Shuhong Yu,et al.  Morphogenesis and Crystallization of Bi2S3 Nanostructures by an Ionic Liquid-Assisted Templating Route: Synthesis, Formation Mechanism, and Properties , 2005 .

[33]  Younan Xia,et al.  One‐Dimensional Nanostructures: Synthesis, Characterization, and Applications , 2003 .

[34]  P. K. Nair,et al.  Photoconductive bismuth sulphide thin films by chemical deposition , 1990 .