Lateral profiling of impurity surface concentration in submicron metal–oxide–silicon transistors

Theory and line-shape analysis of carrier recombination current at interfacial electronic traps under a surface controlling gate in metal–oxide–silicon (MOS) structures is investigated using the Shockley–Read–Hall recombination statistics. The theoretical analysis demonstrates the sensitive dependence of the line shape of the peaked basewell-terminal recombination current versus gate/base voltage (IB–VGB) characteristics on the lateral variation of the impurity concentration along the surface channel. An electrical measurement method is presented based on this discovery for extracting the impurity surface concentration profile NIM(x=0, y, z) in the five regions (basewell, drain and source junction and extension) covered by the gate conductor in submicron MOS transistors. Impurity surface concentration profiles in the basewell channel region are then extracted by the analytical theory for MOS transistors fabricated by an advanced 0.13 μm complementary MOS technology. Effects of nitrogen in the gate oxide and current generated in the drain and source extension regions for profiling the NIM in the extension regions are illustrated.Theory and line-shape analysis of carrier recombination current at interfacial electronic traps under a surface controlling gate in metal–oxide–silicon (MOS) structures is investigated using the Shockley–Read–Hall recombination statistics. The theoretical analysis demonstrates the sensitive dependence of the line shape of the peaked basewell-terminal recombination current versus gate/base voltage (IB–VGB) characteristics on the lateral variation of the impurity concentration along the surface channel. An electrical measurement method is presented based on this discovery for extracting the impurity surface concentration profile NIM(x=0, y, z) in the five regions (basewell, drain and source junction and extension) covered by the gate conductor in submicron MOS transistors. Impurity surface concentration profiles in the basewell channel region are then extracted by the analytical theory for MOS transistors fabricated by an advanced 0.13 μm complementary MOS technology. Effects of nitrogen in the gate oxide a...

[1]  J. Kavalieros,et al.  Direct-current measurements of oxide and interface traps on oxidized silicon , 1995 .

[2]  Hiroshi Iwai,et al.  Electrical characteristics of rapid thermal nitrided-oxide gate n- and p-MOSFET's with less than 1 atom% nitrogen concentration , 1994 .

[3]  A. S. Grove,et al.  Observation of Impurity Redistribution During Thermal Oxidation of Silicon Using the MOS Structure , 1965 .

[4]  H. Wong,et al.  CMOS scaling into the nanometer regime , 1997, Proc. IEEE.

[5]  C. Sah,et al.  A New Semiconductor Tetrode-The Surface-Potential Controlled Transistor , 1961, Proceedings of the IRE.

[6]  Gertjan L. Ouwerling,et al.  A problem-specific inverse method for two-dimensional doping profile determination from capacitance-voltage measurements , 1991 .

[7]  C. Lu,et al.  Reverse short-channel effects on threshold voltage in submicrometer salicide devices , 1989, IEEE Electron Device Letters.

[8]  James W. Mayer,et al.  Ion implantation in semiconductors , 1973 .

[9]  Profiling interface traps in MOS transistors by the DC current-voltage method , 1996, IEEE Electron Device Letters.

[10]  Mark E. Law,et al.  Ion beams in silicon processing and characterization , 1997 .

[11]  W. C. Johnson,et al.  The influence of debye length on the C-V measurement of doping profiles , 1971 .

[12]  D. P. Kennedy,et al.  On the measurement of impurity atom distributions in silicon by the differential capacitance technique , 1968 .

[13]  J. Cai,et al.  Interfacial electronic traps in surface controlled transistors , 2000 .

[14]  C. Sah,et al.  Thin oxide thickness extrapolation from capacitance-voltage measurements , 1997 .