Simulation and Control of High-Order Flatness in Rolling Wide Titanium Strip With 20-High Mill

In wide titanium strip cold rolling process, the high-order flatness defect is one of the most difficult problem to be solved. Based on finite element method, considering the anisotropic mechanical characteristics of titanium, an implicit integration calculation model of rolls-strip for 20-high mill was developed, which can simulate the dynamic rolling process. The model was used to analyze the adjustment characteristics of high-order flatness on the 20-high mill. The simulation revealed as the increasing of the 1# & 7# AS-U or 2# & 6# AS-U press adjustment, the high-order flatness defect was more aggravated; And as the increasing of 3# & 5# AS-U or 4# AS-U press adjustment, the high-order flatness defect was alleviated to some extent. In addition, the high-order flatness cannot be effectively adjusted by roll shifting. Finally, the industrial test showed that increasing 4# AS-U press adjustment can effectively relieve the high-order flatness defect.

[1]  Quan Yang,et al.  Mechanism of lateral metal flow on residual stress distribution during hot strip rolling , 2021 .

[2]  Hongbo Li,et al.  Edge-Drop Control Behavior for Silicon Strip Cold Rolling with a Sendzimir Mill , 2018, Metals.

[3]  B. Luan,et al.  Microstructure and textural evolution during cold rolling and annealing of commercially pure titanium sheet , 2018, Transactions of Nonferrous Metals Society of China.

[4]  F. Pan,et al.  Influence of different rolling routes on mechanical anisotropy and formability of commercially pure titanium sheet , 2017 .

[5]  M. Vedani,et al.  Formability and anisotropy of the mechanical properties in commercially pure titanium after various routes normal and different speed rolling , 2016 .

[6]  员征文,et al.  Plate Shape Control Theory and Experiment for 20-high Mill , 2015 .

[7]  J. Lecomte,et al.  Mechanisms of anisotropy of mechanical properties of α-titanium in tension conditions , 2014 .

[8]  L. Tabourot,et al.  Experimental and numerical analysis of the forming process of a CP titanium scoliotic instrumentation , 2008 .

[9]  Xianghua Liu,et al.  Contact Element Method with Two Relative Coordinates and Its Application to Prediction of Strip Profile of a Sendzimir Mill , 2007 .

[10]  Tatsuhiro Kubo,et al.  Simulation Model for Predicting Strip Shape in Consideration of Characteristics of Flexible Backup Rolls : Development of Controlling Technology for Strip Shape in 20-High Sendzimir Mill I , 2006 .

[11]  Seog-Young Han,et al.  Shape control of alloy steel rolled by sendzimir mill , 1996 .

[12]  Toshiro Yamada,et al.  Shape Controllability for Quarter Buckles of Strip in 20-high Sendzimir Mills , 1991 .

[13]  Zhu Xin-mi.  Defect Analysis on Ridge Buckles of Cold-rolled Pure Titanium Strip , 2014 .

[14]  Qin Jian,et al.  Simulation and Analysis on Shape Control Behavior of 20-h Sendzimir Mill , 2013 .

[15]  Z. Lian.  Anisotropic effects on cold deep drawing of TA1 spherical part , 2010 .

[16]  Hle Consulting.  Y elastic constants of polycrystalline materials with hexagonal system structure , 2009 .

[17]  Wang Chong-tao,et al.  Shape Control on Sendzimir Mill , 2005 .

[18]  W. Chao.  Calculation of elastic properties of metals and alloys with a hexagonal structure , 2000 .