Understanding the features of PGMs in spent ternary automobile catalysts for development of cleaner recovery technology

[1]  F. Millo,et al.  Modeling NOx Storage and Reduction for a Diesel Automotive Catalyst Based on Synthetic Gas Bench Experiments , 2018, Industrial & Engineering Chemistry Research.

[2]  Yaoqiang Chen,et al.  Designed synthesis and characterization of nanostructured ceria-zirconia based material with enhanced thermal stability and its application in three-way catalysis , 2018, Journal of Industrial and Engineering Chemistry.

[3]  K. Islam,et al.  Life cycle impacts of three-way ceramic honeycomb catalytic converter in terms of disability adjusted life year , 2018 .

[4]  O. Marie,et al.  Fe-HFER and Cu-HFER as catalysts for the NOX SCR using acetylene as a reducing agent: Reaction mechanism revealed by FT-IR operando study coupled with 15NO isotopic labelling , 2018 .

[5]  U. Hejral,et al.  Identification of a Catalytically Highly Active Surface Phase for CO Oxidation over PtRh Nanoparticles under Operando Reaction Conditions. , 2018, Physical review letters.

[6]  David Rooney,et al.  Characterisation of Robust Combustion Catalyst from Aluminium Foil Waste , 2018 .

[7]  P. Kočí,et al.  Structure characterisation of catalytic particulate filters for automotive exhaust gas aftertreatment , 2017 .

[8]  E. Zhecheva,et al.  Preparation and characterization of palladium containing nickel–iron–cobalt perovskite catalysts for the complete oxidation of C1–C6 alkanes , 2017, Reaction Kinetics, Mechanisms and Catalysis.

[9]  S. Sharma,et al.  Fuel characterization and performance parameters analysis of diesel engine using blends of palm biodiesel and tyre pyrolysis oil , 2017 .

[10]  H. Volpp,et al.  Exhaust gas condensate – formation, characterization and influence on platinum measuring electrodes in diesel vehicles , 2017 .

[11]  A. Westermann,et al.  Impact of the Zeolite Structure and Acidity on the Adsorption of Unburnt Hydrocarbons Relevant to Cold Start Conditions , 2016 .

[12]  J. Regalbuto,et al.  The catalytic behavior of precisely synthesized Pt–Pd bimetallic catalysts for use as diesel oxidation catalysts , 2016 .

[13]  G. Lu,et al.  Preparation of high oxygen storage capacity and thermally stable ceria–zirconia solid solution , 2016 .

[14]  R. Farrauto,et al.  Part I: A Comparative Thermal Aging Study on the Regenerability of Rh/Al2O3 and Rh/CexOy-ZrO2 as Model Catalysts for Automotive Three Way Catalysts , 2015 .

[15]  M. Yashima.  Invited Review: Some recent developments in the atomic-scale characterization of structural and transport properties of ceria-based catalysts and ionic conductors , 2015 .

[16]  Klas Engvall,et al.  Promoted RhPt bimetallic catalyst supported on δ-Al2O3 and CeO2–ZrO2 during full-scale autothermal reforming for automotive applications: Post-mortem characterization , 2015 .

[17]  D. Poulikakos,et al.  Multi-scale modelling of mass transfer limited heterogeneous reactions in open cell foams , 2014 .

[18]  X. D. Xu,et al.  Perovskite Oxides: Preparation, Characterizations, and Applications in Heterogeneous Catalysis , 2014 .

[19]  Y. Kondo,et al.  Synthesis and characterisation of p-diethylaminomethylthiacalix[4]arene for selective recovery of platinum from automotive catalyst residue , 2014 .

[20]  M. Costa,et al.  Influence of the three way catalytic converter substrate cell density on the mass transfer and reaction resistances , 2014 .

[21]  S. Yin,et al.  Aluminium doped ceria–zirconia supported palladium-alumina catalyst with high oxygen storage capacity and CO oxidation activity , 2013 .

[22]  S. Inomata,et al.  Characterization of nitromethane emission from automotive exhaust , 2013 .

[23]  C. H. Batista,et al.  Caracterização de catalisadores automotivos novos e usados visando à reciclagem dos metais , 2013 .

[24]  Xinbin Ma,et al.  Effect of sulfidation temperature on the catalytic activity of MoO3/CeO2–Al2O3 toward sulfur-resistant methanation , 2013 .

[25]  A. Dent,et al.  Structural Characterization of Alumina-Supported Rh Catalysts: Effects of Ceriation and Zirconiation by using Metal–Organic Precursors , 2013, Chemphyschem : a European journal of chemical physics and physical chemistry.

[26]  D. Ferri,et al.  Influence of the synthesis method on the structure of Pd-substituted perovskite catalysts for methane oxidation , 2013 .

[27]  S. Benjamin,et al.  Pulsating flow in a planar diffuser upstream of automotive catalyst monoliths , 2013 .

[28]  Martin Votsmeier,et al.  Microwave Cavity Perturbation as a Tool for Laboratory In Situ Measurement of the Oxidation State of Three Way Catalysts , 2013, Topics in Catalysis.

[29]  P. Strasser,et al.  Preparation, characterization and degradation mechanisms of PtCu alloy nanoparticles for automotive fuel cells , 2012 .

[30]  S. Vongehr,et al.  Facile and rapid synthesis of spherical porous palladium nanostructures with high catalytic activity for formic acid electro-oxidation , 2012, Nanotechnology.

[31]  N. Boukos,et al.  Synergistic structural and surface promotion of monometallic (Pt) TWCs: Effectiveness and thermal aging tolerance , 2011 .

[32]  S. Matsumoto,et al.  Characterization and dynamic behavior of precious metals in automotive exhaust gas purification catalysts , 2011 .

[33]  D. Fernandes,et al.  Thermal deactivation of Pt/Rh commercial automotive catalysts , 2010 .

[34]  D. Ferri,et al.  Elucidation of structure–activity relationships of model three way catalysts for the combustion of methane , 2010 .

[35]  Fatima Maria Zanon Zotin,et al.  The influence of temperature on the deactivation of commercial Pd/Rh automotive catalysts , 2009 .

[36]  Yusuke Yamada,et al.  Structural Characterization and Catalytic Activity of Nanosized Ceria−Terbia Solid Solutions , 2008 .

[37]  H. Bockhorn,et al.  A novel laboratory bench for practical evaluation of catalysts useful for simultaneous conversion of NOx and soot in diesel exhaust , 2006 .

[38]  D. Murzin,et al.  An investigation of a new regeneration method of commercial aged three-way catalysts , 2006 .

[39]  S. Järås,et al.  Thermal gas treatment to regenerate spent automotive three-way exhaust gas catalysts (TWC) , 2004 .

[40]  D. Duprez,et al.  Characterization of the dynamic oxygen migration over Pt/CeO2-ZrO2 catalysts by 18O/16O isotopic exchange reaction , 2004 .

[41]  G. Blanco,et al.  Characterisation of Three-Way Automotive Aftertreatment Catalysts and Related Model Systems , 2004 .

[42]  M. Flytzani-Stephanopoulos,et al.  Gold-ceria catalysts for low-temperature water-gas shift reaction , 2003 .

[43]  M. Boaro,et al.  The use of temperature-programmed and dynamic/transient methods in catalysis: characterization of ceria-based, model three-way catalysts , 2003 .

[44]  G. Graham,et al.  Characterization of model automotive exhaust catalysts: Pd on Zr‐rich ceria–zirconia supports , 2000 .

[45]  G. Graham,et al.  Characterization of model automotive exhaust catalysts: Pd on ceria and ceria–zirconia supports , 1999 .

[46]  R. Schlögl,et al.  Preparation and characterisation ofPt/Al2O3 aerosol precursors as model Pt-emissions from catalytic converters , 1997 .

[47]  Jilt Sietsma,et al.  Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology. , 2015, Waste management.

[48]  Ren Chuantin.  Development of Reference Materials of Waste Autocatalysts for Analysis , 2014 .