Performance studies on mechanical + adsorption hybrid compression refrigeration cycles with HFC 134a

This paper presents the results of an investigation on the efficacy of hybrid compression process for refrigerant HFC 134a in cooling applications. The conventional mechanical compression is supplemented by thermal compression using a string of adsorption compressors. Activated carbon is the adsorbent for the thermal compression segment. The alternatives of bottoming either mechanical or thermal compression stages are investigated. It is shown that almost 40% energy saving is realizable by carrying out a part of the compression in a thermal compressor compared to the case when the entire compression is carried out in a single-stage mechanical compressor. The hybrid compression is feasible even when low grade heat is available. Some performance indictors are defined and evaluated for various configurations.

[1]  K. Srinivasan,et al.  Adsorption of 1,1,1,2-Tetrafluoroethane on Activated Charcoal , 2001 .

[2]  Robert E. Critoph,et al.  Activated carbon adsorption cycles for refrigeration and heat pumping , 1989 .

[3]  Chander P Arora,et al.  Refrigeration and Air Conditioning , 1983 .

[4]  Pradip Dutta,et al.  Evaluation of minimum desorption temperatures of thermal compressors in adsorption refrigeration cycles , 2006 .

[5]  Kim Choon Ng.  Recent Developments in Heat-Driven Silica Gel-Water Adsorption Chillers , 2003 .

[6]  B. Saha,et al.  Study on adsorption refrigeration cycle utilizing activated carbon fibers. Part 1. Adsorption characteristics , 2006 .

[7]  S. S. Murthy,et al.  Solar-assisted vapor compression/absorption cascaded air-conditioning systems , 1993 .

[8]  Takao Kashiwagi,et al.  Modeling the performance of two-bed, sillica gel-water adsorption chillers , 1999 .

[9]  H. Baehr,et al.  An International Standard Formulation for the Thermodynamic Properties of 1,1,1,2‐Tetrafluoroethane (HFC‐134a) for Temperatures from 170 K to 455 K and Pressures up to 70 MPa , 1994 .

[10]  Kim Choon Ng,et al.  Experimental investigation of activated carbon fibers/ethanol pairs for adsorption cooling system application , 2006 .

[11]  P. Dutta,et al.  Effect of packing density and adsorption parameters on the throughput of a thermal compressor , 2002 .

[12]  Takao Kashiwagi,et al.  Thermodynamic formalism of minimum heat source temperature for driving advanced adsorption cooling device , 2007 .

[13]  N. D. Banker,et al.  Performance analysis of activated carbon + HFC-134a adsorption coolers , 2004 .

[14]  Giovanni Restuccia,et al.  Composites of activated carbon for refrigeration adsorption machines , 1995 .