Numerical investigations on a new type of energy-absorbing structure based on free inversion of tubes

Abstract A new type of structure, called retractable tube, is introduced in the present work to overcome the drawbacks of two traditional types of invertubes. The inversion processes of the proposed tubes under axial compression are simulated by using the non-linear finite element code LS-DYNA and the features of the force–displacement curves and the deformation modes of the proposed tubes are analyzed. A comparative study is conducted to compare the energy absorption characteristics of the new proposed tubes with the plain circular tubes based on the performance indices used most commonly for energy-absorbing devices. The results show that the whole efficiencies of the new proposed tubes are significantly higher than those of the corresponding plain circular tubes. In addition, a parametric study is carried out to investigate the effects of geometric parameters on the behavior of retractable tubes.

[1]  O. Hopperstad,et al.  Static and dynamic crushing of square aluminium extrusions with aluminium foam filler , 2000 .

[2]  Stephen R Reid,et al.  Transient effects in the quasi-static and dynamic internal inversion and nosing of metal tubes , 1998 .

[3]  A Colokoglu,et al.  Strain Rate and Inertial Effects in Free External Inversion of Tubes , 1996 .

[4]  G. Lu,et al.  Quasi-static axial compression of thin-walled circular aluminium tubes , 2001 .

[5]  He Yang,et al.  FEM analysis of mechanism of free deformation under dieless constraint in axial compressive forming process of tube , 2001 .

[6]  Tongxi Yu,et al.  Energy Absorption of Structures and Materials , 2003 .

[7]  S. Al-Hassani,et al.  Characteristics of Inversion Tubes under Axial Loading , 1972 .

[8]  K.R.F. Andrews,et al.  Classification of the axial collapse of cylindrical tubes under quasi-static loading , 1983 .

[9]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .

[10]  G. S. Sekhon,et al.  An analysis of external inversion of round tubes , 2003 .

[11]  L. R. Guist,et al.  Prediction of the inversion load of a circular tube , 1966 .

[12]  T. Y. Reddy,et al.  Guist and marble revisited : on the natural knuckle radius in tube inversion , 1992 .

[13]  E. C. Chirwa,et al.  Theoretical analysis of tapered thin-walled metal inverbucktube , 1993 .

[14]  A. A. Singace.  Axial crushing analysis of tubes deforming in the multi-lobe mode , 1999 .

[15]  A. A. Singace,et al.  On the Eccentricity Factor in the Progressive Crushing of Tubes , 1995 .

[16]  Norman Jones,et al.  Dynamic axial crushing of circular tubes , 1984 .

[17]  W. Abramowicz,et al.  Alexander revisited—A two folding elements model of progressive crushing of tubes , 1992 .

[18]  J. M. Alexander.  AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING , 1960 .

[19]  M. Langseth,et al.  Axial crushing of thin-walled high-strength steel sections , 2006 .

[20]  A. Pugsley.  THE LARGE-SCALE CRUMPLING OF THIN CYLINDRICAL COLUMNS , 1960 .

[21]  S. Reid.  PLASTIC DEFORMATION MECHANISMS IN AXIALLY COMPRESSED METAL TUBES USED AS IMPACT ENERGY ABSORBERS , 1993 .

[22]  Paulo A.F. Martins,et al.  An investigation on the external inversion of thin-walled tubes using a die , 2004 .