Improvement of surface finishing and corrosion resistance of prototypes produced by direct metal laser sintering

Abstract Using the prototyping technology it is possible to obtain in short production time components like mould for production of polymeric parts. In this paper the direct metal laser sintering technology is utilised to produce a benchmark to evaluate some limits and the problems of this technology concerning the surface finish. Several surface treatments are carried out to reduce surface roughness. The most promising are the grinding and emery polishing, which produce an R a lower than 1 μm. Following the deposition of some coatings is considered to improve the quality of the surface finishing and to guarantee the corrosion resistance of prototyped components. CrN/NbN layers, PTFE-based coating and electroless nickel coatings with and without SiC and PTFE particles are considered. The nickel coating, applied after shot peening and polishing, shows the best performance because of the coatings show an uniform thickness and guarantee a good corrosion protection. Finally, 500 polymeric pieces are produced through polypropylene injection utilising prototyped nickel protected mould, without wear problem of mould.

[1]  Svetan Ratchev,et al.  Distributed product and facility prototyping in extended manufacturing enterprises , 2000 .

[2]  L. Fedrizzi,et al.  Low temperature plasma immersion ion implantation of nitrogen on a mould steel , 2002 .

[3]  M. Stack,et al.  The corrosion behaviour of macroparticle defects in arc bond-sputtered CrN/NbN superlattice coatings , 2000 .

[4]  K. Osakada,et al.  The manufacturing of hard tools from metallic powders by selective laser melting , 2001 .

[5]  S. Lyon,et al.  Corrosion performance of CrN/NbN superlattice coatings deposited by the combined cathodic arc/unbalanced magnetron technique , 1999 .

[6]  I. Chang,et al.  Instability of scan tracks of selective laser sintering of high speed steel powder , 1999 .

[7]  Emanuel M. Sachs,et al.  Surface macro‐texture design for rapid prototyping , 2000 .

[8]  Frank W. Liou,et al.  Laser metal forming processes for rapid prototyping - A review , 2000 .

[9]  D. B. Lewis,et al.  Chromium nitride/niobium nitride superlattice coatings deposited by combined cathodic-arc/unbalanced magnetron technique , 1999 .

[10]  Xue Yan,et al.  PII: 0010-4485(95)00035-6 , 2003 .

[11]  D. King,et al.  Alternative materials for rapid tooling , 2002 .

[12]  D. B. Lewis,et al.  Combined cathodic arc/unbalanced magnetron grown CrN/NbN superlattice coatings for corrosion resistant applications , 1999 .

[13]  K. Osakada,et al.  Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing , 2002 .

[14]  Francis E. H. Tay,et al.  Laser sintered rapid tools with improved surface finish and strength using plating technology , 2002 .

[15]  W. Münz,et al.  Recent progress in large-scale production of nanoscale multilayer/superlattice hard coatings , 2002 .

[16]  Seok-Hee Lee,et al.  Determination of fabricating orientation and packing in SLS process , 2001 .

[17]  D. B. Lewis,et al.  Recent progress in large scale manufacturing of multilayer/superlattice hard coatings , 2000 .

[18]  A. Averill,et al.  Protective and decorative coatings for metals : a wide ranging survey of inorganic and mechanical processes, properties and applications , 1978 .

[19]  Brittain,et al.  Prototyping of masks, masters, and stamps/molds for soft lithography using an office printer and photographic reduction , 2000, Analytical chemistry.